RT Journal Article
SR Electronic
A1 Voděrová, Milena
A1 Novák, Pavel
A1 Vojtěch, Dalibor
T1 Compacting of Aluminium Alloys Prepared by Melt Spinning Method
JF Manufacturing Technology Journal
YR 2013
VO 13
IS 4
SP 575
OP 580
DO 10.21062/ujep/x.2013/a/1213-2489/MT/13/4/575
UL https://journalmt.com/artkey/mft-201304-0031.php
AB Aluminium alloys prepared by rapid solidification (RS) are characterized by very fine microstructure, increased hardness and thermal stability, which determine these alloys to be used especially in an automotive or aerospace industry. However, there is no practical use for rapidly solidified alloys in the form of thin ribbons and further processing of the material is necessary. Compacting of rapidly solidified alloys can be realized by hot extrusion or hot pressing. The aim of this work was to prepare a metallic powder from RS alloys by cryogenic milling and to compact the powder into a bulk material by hot pressing. Both microstructure and phase composition of hot pressed products were studied and compared. Alloys of chemical composition Al-Fe-X, where X means transition metal Cr or Ni, were studied.