RT Journal Article
SR Electronic
A1 Jurči, Peter
A1 Kusý, Martin
A1 Ptačinová, Jana
A1 Kuracina, Vladimír
A1 Priknerová, Petra
T1 Long-term Sub-zero Treatment of P/M Vanadis 6 Ledeburitic Tool Steel - a Preliminary Study
JF Manufacturing Technology Journal
YR 2015
VO 15
IS 1
SP 41
OP 47
DO 10.21062/ujep/x.2015/a/1213-2489/MT/15/1/41
UL https://journalmt.com/artkey/mft-201501-0008.php
AB The microstructure, the phase constitution and the tempering charts of Cr-V ledeburitic steel Vanadis 6 subjected to sub-zero treatment with various soaking times in liquid nitrogen have been investigated. The microstructures have been characterized using the light microscopy, scanning electron microscopy and X-ray diffraction. The hardness has been evaluated by Vickers method. The matrix is martensitic with certain amount of retained austenite, irrespectively to the time of sub-zero treatment. The amount of retained austenite, however, decreases up to the soaking time of 17 h and then remains almost constant. The microstructure of sub-zero treated steel contains enhanced portion of small globular carbides, as compared to conventionally heat treated material. These particles have a size of around 100 nm in most cases. The as-quenched hardness manifests a moderate increase due to the sub-zero treatment. The hardness decreases during subsequent tempering and this decrease is more pronounced in sub-zero treated samples.