PT Journal
AU Fiala, Z
   Jaros, A
   Sedlak, J
   Kolar, L
   Blazkova, V
TI Effect of Spindle Unit Extrusion on Stability of Machining Process
SO Manufacturing Technology Journal
PY 2015
BP 329
EP 333
VL 15
IS 3
DI 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/329
DE Vibration; spindle; stability; extrusion; dynamic compliance
AB Dynamic characteristics of a machine-tool-workpiece system are not constant during machining, but they can be changed by a variable spindle position, a rising tool wear or a gradual change of a workpiece geometry. This paper deals with an influence of spindle unit extrusion on stability of a machining process. Two milling cutters with different rigidity, flexible and stiff, were used for experimental machining at three axis milling machines. Clamped milling cutters were extracted systematically and a frequency response function was measured simultaneously. Reached data (natural frequency and dynamic compliance) were used for finding a correlation between dynamic parameters and extrusion of the spindle. Critical extrusion of the spindle unit was predicted by an experimental measurement and an axial depth of cut thresholds was established for the stable machining.
ER