RT Journal Article
SR Electronic
A1 Fiala, Zdenek
A1 Jaros, Ales
A1 Sedlak, Josef
A1 Kolar, Ladislav
A1 Blazkova, Vendula
T1 Effect of Spindle Unit Extrusion on Stability of Machining Process
JF Manufacturing Technology Journal
YR 2015
VO 15
IS 3
SP 329
OP 333
DO 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/329
UL https://journalmt.com/artkey/mft-201503-0012.php
AB Dynamic characteristics of a machine-tool-workpiece system are not constant during machining, but they can be changed by a variable spindle position, a rising tool wear or a gradual change of a workpiece geometry. This paper deals with an influence of spindle unit extrusion on stability of a machining process. Two milling cutters with different rigidity, flexible and stiff, were used for experimental machining at three axis milling machines. Clamped milling cutters were extracted systematically and a frequency response function was measured simultaneously. Reached data (natural frequency and dynamic compliance) were used for finding a correlation between dynamic parameters and extrusion of the spindle. Critical extrusion of the spindle unit was predicted by an experimental measurement and an axial depth of cut thresholds was established for the stable machining.