RT Journal Article
SR Electronic
A1 Lago, Ján
A1 Guagliano, Mario
A1 Nový, František
A1 Bokůvka, Otakar
T1 Influence of Laser Shock Peening Surface Treatment on Fatigue Endurance of Welded Joints from S355 Structural Steel
JF Manufacturing Technology Journal
YR 2016
VO 16
IS 1
SP 154
OP 159
DO 10.21062/ujep/x.2016/a/1213-2489/MT/16/1/154
UL https://journalmt.com/artkey/mft-201601-0032.php
AB This work deals with fatigue testing of the EN S355 structural steel welded joint. The weld was manufactured by the MIG welding technology and as the filler material was used the G3Si1 wire. The fatigue tests were carried out in the rotating bending mode on the specimens manufactured from the welded joint of the S355 steel. The main aim was to evaluate the fatigue endurance of the weld material and for this reason were used machined axis symmetrical specimens to remove the notch effect of the weld shape. In order to increase the fatigue endurance of the weld, the Nd-YAG laser was used for laser shock peening (LSP) of specimens surfaces, which lead to removing of the weld defects but in overall caused that LSP has behaved as the notch and lead to decreasing of the fatigue endurance. Obtained results of fatigue tests are compared, discussed and supported by correlation with results of additional experiments, e.g. identification of incurred structures after the laser shock peening by the metallographic observations and micro-hardness tests.