RT Journal Article
SR Electronic
A1 Monka, Peter Pavol
A1 Markovič, Jaromír
A1 Monkova, Katarina
A1 Řehoř, Jan
A1 Hric, Slavomír
A1 Manduľák, Dušan
T1 Fixtures Design for Increasing of Quality Production of Cast Workpiece with Weld Deposit
JF Manufacturing Technology Journal
YR 2016
VO 16
IS 6
SP 1314
OP 1319
DO 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1314
UL https://journalmt.com/artkey/mft-201606-0018.php
AB The article deals with the principles of fixtures design and their application at machining of armature DM 100, PN 25/40-RF. It is bulky component that is produced by casting technology. Surfaces near the hole of valve are hard machinable due to weld deposit. Considering elimination of clamping device weaknesses that could originate due to unsuitable design and production, it is advantageous to use a virtual model along with simulation and analysis in CAD/CAM system. Nowadays technologists have strong tools in their hands that increase efficiency of solution not only conventional, but also specific, problems. On the other hand, they have to know to solve some difficulties in their mind, such are, for example, the differences in specifications of coordinate systems used for virtual model in CAD/CAM system and coordinate systems used in real production. The problems can arise in case of cutting tool definition according to the tool-in-hand or tool-in-use systems. Based on theoretical know-how two fixtures were designed for manufacturing of two sets of surfaces that are normal each other, so after inovation manufacturing operations were realized in vertical and in horizontal position of workpiece axes. Using new approach, the production efficiency and production rate have increased twice and no failure product has been made.