RT Journal Article
SR Electronic
A1 Kejzlar, Pavel
A1 Machuta, Jiří
A1 Nová, Iva
T1 Comparison of the Structure of CuZn40MnAl Alloy Casted into Sand and Metal Moulds
JF Manufacturing Technology Journal
YR 2017
VO 17
IS 1
SP 44
OP 48
DO 10.21062/ujep/x.2017/a/1213-2489/MT/17/1/44
UL https://journalmt.com/artkey/mft-201701-0009.php
AB CuZn brasses are used for manufacturing highly stressed structural comonents. Their mechanical properties as e.g. strenth, toughness or wear resistance are affected not only by their chemical composition, but also by their structure. This paper is dedicated to the study and comparison of the structure of sand- and metal mould casted Cu40Zn alloy. Scanning electron microscopy supplied by energy dispersive spectroscopy and electron backscatter diffraction were used to evaluate the structure of both samples. Casting into the metal mould produces approximately five times finer grain structure compared to the sand mould. EBSD orientation mapping revealed a strong correlation between both matrix phases, αCu and β' phase. Also, the size of Fe2MnSi ternary precipitates is affected by the cooling rate.