RT Journal Article
SR Electronic
A1 Sedlak, Josef
A1 Malasek, Jiri
A1 Ondra, Martin
A1 Polzer, Ales
T1 Construction of Mechanic Regulation of Turbine Ventilator using Whirling Turbine
JF Manufacturing Technology Journal
YR 2017
VO 17
IS 2
SP 242
OP 250
DO 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/242
UL https://journalmt.com/artkey/mft-201702-0019.php
AB An article deals with a definition, concept, development, calculation and construction of a prototype of mechanical regulation of a turbine ventilator using a whirling turbine reducing an amount of ventilated air.The whole mechanical regulation solution is situated at a central shaft with arms. At low air velocity, a rotation nozzle is pulled out fully from its cover and works with a maximum suction capacity. The rotation nozzle starts to pull in its cover at higher air velocity, which protects the blades from push of air, which would slow down the whole turbine. A vertical move of the turbine is provided by an inner mechanism functioning basically as a centrifugal regulator. The advantage of this concept lies in not only suction regulation, but also protection of the rotation nozzle from a damage in case of adverse weather (the rotation nozzle stays inserted). The article describes individual development stages from a concept up to construction, including the final visualisation of the prototype solution of the mechanical regulation of the turbine ventilator using the whirling turbine.The mentioned innovative solution of the mechanical regulation is very up-to-date thanks to its simplicity and nonservice operation. It is just the matter of time when one of the producers would be interested in the turbine ventilator solution and it would be introduced into a market space.