PT Journal
AU Vasilko, K
   Murcinkova, Z
TI The Proposal How to Make the Basic Machining Technologies - Turning, Milling, Planing - More Productive
SO Manufacturing Technology Journal
PY 2017
BP 261
EP 267
VL 17
IS 2
DI 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/261
DE productivity; machining time; technology; automation; product; material
AB The current manufacturing production is characterised by increasing level of automation, emerging of the new light-weight and high-stiff materials that are technologically difficult to produce. These trends have significant impact on production productivity. The automation has brought significant reduction of non-productive time (fast workpiece and tool exchange, automatic control of product quality during technological process). In this situation, the machining time becomes the limiting factor. In present, the reducing of the machining time is possible to make only by either significant changes in conventional technologies or application of new technological principle. However, these secondary solutions in some production section are not sufficient because it requires a global solution. An example of un-equal time continuity in link production is fact that one pressing machine with the time per one piece in seconds can supply dozen of lathes with the time per one piece in minutes. The paper provides also the proposal to the productivity increase of critical technologies as turning and milling.
ER