PT  - JOURNAL ARTICLE
AU  - Kuchariková, Lenka
AU  - Tillová, Eva
AU  - Uhríčik, Milan
AU  - Belan, Juraj
AU  - Švecová, Ivana
TI  - High-cycles Fatigue of Different Casted Secondary Aluminium Alloy
DP  - 2017 Oct 1
TA  - Manufacturing Technology Journal
PG  - 756--761
VI  - 17
IP  - 5
AID - 10.21062/ujep/x.2017/a/1213-2489/MT/17/5/756
IS  - 12132489
AB  - Nowadays manufacturers currently use about 35 % of secondary aluminium and about 65 % of primary aluminium to meet their needs. The production of secondary Al alloys have significant advantages. Most important is saving of natural resources with a consequent material cost reduction and a considerable energy-saving associated to reduction in pollution and CO2 emissions. The positive fact is that secondary Al alloys has comparable mechanical properties with primary aluminium alloys. Therefore it is necessary to study properties such alloys especially those which are used for transport industry in order to keeping the quality of casting. One of the major properties of casting for transport industry are fatigue properties. Research point to the fact that more than 90 % of broken engineering components are fractures caused by fatigue of used material. Extremely dangerous are fatigue fractures in transport, for example rails, tire parts, plane wings and hulls of ships, because these are usually connected with human casualties. Due to this fact were studied fatigue properties of aluminium alloys used especially for automotive castings - AlSi9Cu3. The great object was influence of casting to the different mould (sand and metallic) without modification, heat treatments or grain refinement of experimental material to fatigue resistance of the casting. This work shows differences between materials properties which were casted into the different mould.