RT Journal Article
SR Electronic
A1 Novakova, Iva
A1 Moravec, Jaromir
A1 Kejzlar, Pavel
T1 Metallurgy of the Aluminium Alloys for High-Pressure Die Casting
JF Manufacturing Technology Journal
YR 2017
VO 17
IS 5
SP 804
OP 811
DO 10.21062/ujep/x.2017/a/1213-2489/MT/17/5/804
UL https://journalmt.com/artkey/mft-201705-0031.php
AB The paper deals with the monitoring the metallurgical purity of alloy AlSi9Cu3(Fe) both in the dependence on the input material quality and on the manner of the melt metallurgical treatment. Experiment was divided into two phases. During the first phase there was monitored the metallurgical purity of the input material delivered from the different suppliers. During the second phase was at the standardly prepared melt observed the influence of the degassing time on its metallurgical purity. To evaluate the input material metallurgical purity, Drosstest was performed and subsequently also the metallurgical evaluation of samples. To determine the influence of degassing time on the metallurgical purity of melt, Density index (DI) was monitored. By this index it is possible to evaluate the amount of inclusions and dissolved gas. Based upon the measured values there was determined the degassing time needed to achieve the required values of DI.