PT Journal
AU Hrbackova, L
   Sedlak, J
   Chromjakova, F
   Macurova, L
   Jurickova, E
   Dobrocky, D
   Skerik, F
TI Evaluation of the Effect of Machining Technologies on the Surface Texture Analysis of Ertacetal C Polymer
SO Manufacturing Technology Journal
PY 2023
BP 679
EP 692
VL 22
IS 6
DI 10.21062/mft.2022.083
DE Machining; Technical Plastics; Polymers; Surface Texture; Surface Roughness; Profile Parameters; Area Parameters
AB The surface created by machining significantly affects the service life and functional reliability of the component. As part of this study, four different chip machining technologies were evaluated on the surface texture of the polymer material Ertacetal C. The samples were processed by turning, milling, grinding and polishing technologies, 5 samples for each technology. Within the given technology, different cutting conditions were chosen to compare the effect of cutting conditions on the resulting surface roughness. The machined surfaces were comprehensively evaluated on the basis of 16 profile and surface roughness parameters due to the practical use of the tested material. Surface texture measurements were performed on a Talysurf CCI Lite device. A non-contact method using a coher-ence correlation interferometer was used for the measurement. The obtained data were evaluated using TalyMap Platinum software. Graphical documentation of the machined surfaces was made using an Olympus DSX500 opto-digital metallographic microscope.
ER