PT  - JOURNAL ARTICLE
AU  - Zhang, Peng
AU  - Li, Yanzhou
TI  - Microstructural Analysis, Corrosion Resistance, and Wear Performance Study of Al0.8FeCoNiCrCu0.5Si0.2 High-Entropy Alloy
DP  - 2024 Sep 1
TA  - Manufacturing Technology Journal
PG  - 700--709
VI  - 24
IP  - 4
AID - 10.21062/mft.2024.062
IS  - 12132489
AB  - The high-entropy alloy with the composition Al0.8FeCoNiCrCu0.5Si0.2 was produced through a pro-cess in-volving a vacuum arc melting method. Comprehensive characterization was performed through techniques such as XRD, SEM, and TEM. The findings revealed that the alloy primarily con-sists of Fe-Cr and Al-Ni phases, displaying predominantly two body-centered cubic structures. The alloy exhibited a characteristic dendritic cast structure. The alloy predominantly has high-angle grain boundaries accounting for 96.1%. Its grains demonstrate minimal internal strain and reduced lattice anomalies. The alloy showcased resistance with a corrosion current density of 1.4×10-7 A/cm2 and a corrosion potential of 0.28047 V. Post-corrosion examinations emphasized regions abundant in Al and Cu as the primary degradation sites. The addition of Si has further improved the alloy's resistance to corrosion. In terms of abrasion durability, the alloy exhibit-ed a wear scar length of only 1.42 mm, substantially less than the 1.88 mm found in 45# steel, highlighting its enhanced resistance to wear. This wear resistance is attributed to its inherent BCC1 and BCC2 phase structures and the hardness it derives from its unique composition. Owing to its superior traits, this high-entropy alloy presents promising potential for applications, including coatings, and advanced automotive components.