Manufacturing Technology 2009, 9(1):16 | DOI: 10.21062/ujep/x.2009/a/1213-2489/MT/9/1/16

Surface Roughness Determination in Turning of Cylindrical Surfaces

Csaba Felhő, János Kundrák
Department of Production Engineering, University of Miskolc, Hungary

The topic of the article is the determination of theoretical values of surface roughness on cylindrical surfaces machined by turning. For the calculation of the values of main roughness parameters (Rmax, Rz, Ra) a general mathematical model was developed, and a computer software based on this model has also developed. In the article this model and the software based on it gets introduced briefly, as the determination of connections between calculated theoretical values and measured data obtained through experiments.

Keywords: surface roughness, theoretical roughness

Published: December 1, 2009  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Felhő C, Kundrák J. Surface Roughness Determination in Turning of Cylindrical Surfaces. Manufacturing Technology. 2009;9(1):16. doi: 10.21062/ujep/x.2009/a/1213-2489/MT/9/1/16.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. KUNDRAK, J. Increasing the Effectiveness of Machining by Application of Composite Tools in Boring of Cylindrical and Polygon Surfaces (in Russian). CSc Dissertacion. Tula 1986. p. 315.
    2. C.A. van LUTTERVELT, C.A van, T.H.C. CHILDS, T.H.C., JAWAHIR, I.S. at al. Present Situation and Future Trends in Modelling of Machining Operations. Progress Report of the CIRP Working Group 'Modelling of Machining Operations'; Keynote Paper, Annals of the CIRP Vol. 47/2/1998, pp.:587-626. Go to original source...
    3. KUNDRAK, J, FELHO, Cs. Roughness Designeability of Surfaces Machined by Cutting, V. International Congress on Precision Machining (ICPM2009), 15-19. September 2009, Stará Lesná, Slovakia, pp.107-112, ISBN 978-80-553-0243-0.

    Return to the content