Manufacturing Technology 2011, 11(1):77-84 | DOI: 10.21062/ujep/x.2011/a/1213-2489/MT/11/1/77

Identification of "natural" breaker cut during the machining of carbon steels

Vasilko Karol
Faculty of Production Technology, TU in Kosice with seat in Presov, Bayerova 1, Presov. Slovak Republic

Tool wear is generally considered a negative fact, which worsens machining results. According to theories it causes the growth of cutting forces, cutting temperature worsens the quality of machined surface. Closer study of the process of the wear leads to the need to distinguish between the effects of the wear on the back and on the face of the tool. The paper deals with the study of the mechanism of wear on the face in time relation. It shows that the groove on the face, which is created by leaving chip, can have positive aspect. It can be used as "natural chip shaper".

Keywords: cutting tool, tool wear, machining time, tool life

Published: December 1, 2011  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K. Identification of "natural" breaker cut during the machining of carbon steels. Manufacturing Technology. 2011;11(1):77-84. doi: 10.21062/ujep/x.2011/a/1213-2489/MT/11/1/77.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BOBROV, V, F, et al.: Razvitije nauki o rezanii metallov. Moskva: Mašinostrojenije, 1967, 414 s.
    2. BUDA, J., VASILKO, K.: Nová metóda na zastavenie procesu obrábania bez špeciálnych prípravkov. Patent SR č. 122243
    3. GRANOVSKIJ, G, L., GRANOVSKIJ, V, G.: Rezanije metallov. Moskva: Vyššaja škola, 1985m 304 s.
    4. GAZDA, J.: Teorie obrábění. Průvodce tvorbou třísky. Liberec: TU, 2004, 112 s., ISBN 80-7083-789-6
    5. GRZESIK, W.: Podstawy skrawania materialow metalowych. Warszawa: Wydavnictwa Naukowo-Techniczne, 1998, 380 s., ISBN 83-204-2311-2
    6. HOSHI, K., HOSHI, T.: On the metal cutting mechanism with the built-up edge. Mem. Fac. Engng, Hekkaide University 12, č. 3, 1969
    7. KALPAKIJAN, S.: Manifacturing engineering and technology. New York: Eddison Wesley Publishing Company, 1989, 1999 p., ISBN 0-201-121849-7
    8. KOVAČ, P., MILIČIČ, D.: Rezanje metala. Novi Sad: Univerzitet u Novom Sadu, 240 s., ISBN 86-899-0015-1
    9. LOLADZE, T, N.: Stružkoobrazovanije pri rezanii metallov. Moskva: Mašgiz, 1952
    10. MÁDL, J., KVASNIČKA, J.: Optimalizace obráběcího procesu. Praha: Vydavatelství ČVUT, 1998, 168 s.
    11. PŘIKRYL, Z., MUSÍLKOVÁ, R.: Teorie obrábění. Praha: SNTL, 1982, 235 s.
    12. SIMONEAU, E., ELBESTAWI, M, A: The Effect of Microstructure on Cháp Formation and Surface Defect in Microscale, Mesoscale, and Macroscale Cutting of Steel. Annals of the CIRP, Vol. 55/1/2008 Go to original source...
    13. TRENDT, E, M.: Metal Cutting. London - Boston: Ed. Oxford, Butterworths - Helnemann, 1991, 273 s., ISBN 0-7506-1068-9
    14. WRIGHT, P, K.: Applications of the Experimental Methods Used to Determine Temperature Gradients. In: Cutting Tools. Austrial Conference Manufacturing Engineering. Adelaide, 1977, Barton, 1977, pp. 145-149

    Return to the content