Manufacturing Technology 2012, 12(1):75-79 | DOI: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/75

Application of Progressive Materials for Rapid Prototyping Technology

Novakova-Marcincinova Ludmila, Janak Miroslav
Faculty of Manufacturing Technologies, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia

In paper are presented basic information about common and progressive materials used for realization of products by Rapid Prototyping technology application. The initial state of material can come in either solid, liquid or powder state. In solid state it can come in various forms such as pellets, wire or laminates. The current range materials include paper, nylon, wax, resins, metals and ceramics. Last mentioned materials are used manly in application of Rapid Prototyping technology for rapid manufacturing of products or rapid production of tools - Rapid Tooling.

Keywords: Rapid Prototyping, rapid prototyping materials, rapid manufacturing

Published: June 1, 2012  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novakova-Marcincinova L, Janak M. Application of Progressive Materials for Rapid Prototyping Technology. Manufacturing Technology. 2012;12(1):75-79. doi: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/75.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. HOPKINSON, N.; HAQUE, R.; DICKENS, P. Rapid Manufacturing: An Industrial Revolution for the Digital Age. Wiley, Oxford, 2006, 304 p., ISBN 978-0470016138. Go to original source...
    2. CHUA, C. K., LEONG, K. F., LIM, C. S.: Rapid Prototyping: Principles and Applications. World Scientific Publishing, Singapore, 2003, 420 p., ISBN 981-238-117-1.
    3. MARCINCINOVA, L. N., FECOVA, V., MARCINCIN, J. N., JANAK, M., BARNA, J.: Effective utilization of Rapid Prototyping technology. Materials Science Forum, Vol. 713, 2012, p. 61-66, ISSN 0255-5476. Go to original source...
    4. MASSOD, S. H., SONG, W. Q.: Development of new metal/polymer materials for rapid tooling using Fused deposition modelling. Materials & Design, Vol. 25, No. 7, 2004, p. 587-594, ISSN 0261-3069. Go to original source...
    5. SANDA, S., MANAS, M., MANAS, D., STANEK, M., KNOT, J.: Use of Rapid Prototyping in Injection Moulds Design. Mechanical Technology, Vol. 16, No. 5, 2011, p. 58-63, ISSN 1211-4162.
    6. Gallardo Headlight Washer Cover Flap (http://www.crptechnology.com/sito/en/lamborghini-gallardo-headlight-washer-cover-flap.html).
    7. Rapid Prototyping: SLA (http://www.efunda.com/processes/rapid_prototyping/sla.cfm).
    8. Fused Deposition Modeling - FDM (http://www.custompartnet.com/wu/fused-deposition-modeling).
    9. Laser Engineered Net Shaping (http://www.sandia.gov/mst/technologies/net-shaping.html).

    Return to the content