Manufacturing Technology 2012, 12(2):281-285 | DOI: 10.21062/ujep/x.2012/a/1213-2489/MT/12/2/281

Phenomenon of twist drill

Karol Vasilko, Vladimír Simkulet
Faculty of Manufacturing Technologies, Technical University of Košice, 08001 Prešov, Bayerova 1, Slovak Republic

In 1770 an Englishman, P. Cooke, had a twist drill patented, a tool, which has such specifications at its application, that are not typical for other tools, in spite of its defined geometric shape. During drilling it behaves like a helical spring, it turns as a result of cutting resistance after first turn and it tries to screw off and screw in, which leads to the occurence of torsional vibration. Cutting speed changes considerably along the cutting edge of the drill, by which the coefficient of friction with drilled material and cutting wedge wear change as well. A built-up edge on the face area occures on certain section of cutting edge and it tears off. By this cutting conditions change, working face angle, radius of "plastic" tip of the built-up edge and the quality of surface of drilled hole. These specific phenomena are identifiend in the paper.

Keywords: cutting, drilling, quality of surface, tool wear

Published: December 1, 2012  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K, Simkulet V. Phenomenon of twist drill. Manufacturing Technology. 2012;12(2):281-285. doi: 10.21062/ujep/x.2012/a/1213-2489/MT/12/2/281.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BUDA,J., BÉKÉS, J.: Teoretické základy obrábania kovov. Bratislava: ALFA, 1977, 698 s.
    2. DMOCHOWSKI, J.: Podstawy obróbki skrawaniem. Warszywa: Paňstwowe Wydawnictwo Naukowe, 1978, 586 s.
    3. GENSKÝ, R.: Metal cutting operations. Leipzig: Edition Leibzig, 1966, 191 s.
    4. GRZESIK, W.: Podstawy skrawania materialow metalowych. Warszawa: Wydawnictwa Naukowo - Techniczne, 2010, 526 s., ISBN 978-83-204-3668-6.
    5. HRUBEC, J.: Niektoré poznatky o plastických deformáciách pri vŕtaní. Strojírenství 18, 1968, č. 7.
    6. HOLEŠOVSKÝ, F., NAPRSTKOVÁ, N., NOVÁK, M.: GICS for grinding process optimalization. In: Manufacturing Technology, 2012, Vol. 12, Nr. 12 Go to original source...
    7. MAJERIK, J., JAMRICHOVA, Z., BOBRIKOVA, M.: The verification of axial forces and torques in drilling by the noncoated cutting tools and drills with PVD coating. In: Annals & Proceedings of the 23rd Internationl DAAAM Symposium, Vol. 23, No 1, ISSN 2304-1382
    8. MAKEDONSKI, A., OHRIDSKI, Kl..: Unconventional machining method for enhancing the durability of tools and strength of the specimens bonded. In: Manufacturing Technology, December 2011, Vol. 11, No 11 Go to original source...
    9. NOVAK, M. (2012). Surfaces with high precision of roughness after grinding. In Manufacturing Technology, vol. 12., no. 12., UJEP, Usti nad Labem, 66-70 pp. Go to original source...
    10. STEPHENSON, D, A., AGAPIOU, J, S.: Metal Cutting Theory and Practice. New York:Taylor & Francis2006, pp.846, ISBN 0-8247-5888-9
    11. VASILKO, K., MÁDL, J.: Teorie obrábění 1. díl. Ústí nad Labem: Univerzita J.E.Purkyně, 2012, 298 s., ISBN 978-80-7414-459-2

    Return to the content