Manufacturing Technology 2014, 14(2):130-136 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/2/130

Abrasive Wear Resistance of Wood

Milan Brožek
Czech University of Life Sciences Prague, 16521 Prague 6 - Suchdol, Czech Republic, Phone: +420 22438 3265

Published: June 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Brožek M. Abrasive Wear Resistance of Wood. Manufacturing Technology. 2014;14(2):130-136. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/2/130.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BLAU, P. J. (1992). ASM Handbook, Volume 18 - Friction, Lubrication, and Wear Technology. ASM International. Online version available at: http://app.knovel.com/hotlink/toc/id:kpASMHVFL2/asm-handbook-volume-18. Acessed 10 November 2013.
    2. BROŽEK, M. (2012). Wear resistance of multi-layer overlays. In.: 11th International Scientific Conference Engineering for Rural Development. 24-25. May, 2012. Latvia: Jelgava, 210 - 215. Available online: http://tf.llu.lv/conference/proceedings2012/. ISSN 1691-5976.
    3. BROŽEK, M. (2007). Technicko-ekonomické hodnoceni aplikace návarů u plužních čepeli (Technical-economical evaluation of the overlays application on plough shares). Acta Univ. Agric. et Silvic. Mendel. Brun., 55, 4: 129-136. In Czech. ISSN 1211-8516. Go to original source...
    4. BROŽEK, M. (2014). Selected plastics wear resistance to bonded abrasive particles compared to some ferrous materials. Acta Univ. Agric. et Silvic. Mendel. Brun., 62, x: xxx-xxx. ISSN 1211-8516. In press.
    5. BROŽEK, M., NOVÁKOVÁ, A. (2008). Evaluation of sintered carbides wear resistance. In.: 7th International Scientific Conference Engineering for Rural Development. 29-30 May, 2008. Latvia, Jelgava, 209-213. Available online: http://tf.llu.lv/conference/proceedings2008/. ISBN 1691-5976.
    6. BROŽEK, M., NOVÁKOVÁ, A., MIKUŠ, R. (2010). Study of wear resistance of hard facings using welding powders on the NiCrBSi basis. In.: 4th International Conference Trends in Agricultural Engineering 2010. 7-10 September, 2010. Prague: Czech University of Life Sciences Prague, 115-118. ISBN 978-80-213-2088-8.
    7. BUDINSKI, K. G. (1997). Resistance to particle abrasion of selected plastics. Wear. 203-204. 302-309. Go to original source...
    8. CIESLAR, J., BROŽEK, M., BEDNÁŘ, B. (2013). An experimental assessment of special metal castings in reducing abrasive wear. Manufacturing Technology. 13, 4: 423-428. ISSN 1213-2489. Go to original source...
    9. FAHERTY, K. F., WILLIAMSON, T. G. (1995). Wood engineering and construction handbook 2. ed. New York: Osborne-McGraw-Hill. ISBN 0-07-019911-6.
    10. Friction and Wear Testing. American Society for Testing and Materials (1987). West Conshohocken, PA: American Society for Testing and Materials. 186. ISBN 0-87170-617-2.
    11. KAFKA, E. (1989). Dřevařská příručka (Woodworking guide). 1. vyd. Praha: Nakladatelství technické literatury. 483.
    12. KETTUNEN, P. O. (2006). Wood: Structure and properties. Uetikon-Zuerich; Enfield: Trans. Tech. Publ. 401. ISBN 0-87849-487-1.
    13. KRÁL, P., HRÁZSKÝ, J. (2008). A contribution to the resistance of combined plywood materials to abrasion. Journal of Forest Science, 54, 1, 31-39. Go to original source...
    14. Lever, A. E, Rhys, J. A. (1968). The properties and testing of plastic materials. 3rd Ed. Bristol: Wright Temple Press Books. 445.
    15. LIU, Z. D., WANG, W. B., CAI, L., GUO, D. J., DAI, Z. D. (2012). Friction and wear properties of commercial solid wood floorings. Mocaxue Xuebao (Tribology). 32, 6. 557-562.
    16. OHTANI, T., YAKOU, T., KITAYAMA, S. (2001). Two-body and three-body abrasive wear properties of Katsura wood. Journal of Wood Science, 47, 2, 87-93. Go to original source...
    17. OHTANI, T., YAKOU, T., KITAYAMA, S. (2002) Effect of annual rings on abrasive wear property of wood. Journal of Wood Science, 48, 4, 264-269. Go to original source...
    18. OHTANI, T., KAMASAKI, K., TANAKA, C. (2003). On abrasive wear property during three-body abrasion of wood. Wear, 255, 1-6, 60-66. Go to original source...
    19. PESCHEL, P. (2002). Dřevařská příručka. Tabulky. Technické údaje (Woodworking guide. Tables. Technical data). Praha: Sobotáles. 318. ISBN 80-85920-84-0
    20. PLUHAŘ, J. et al. (1989). Nauka o materiálech (Material Science). Praha: SNTL. 552.
    21. SLAVID, R. (2009). Wood architecture. Paperback ed. London: Laurence King. 239. ISBN 978-1-85669-606-7.
    22. TSOUMIS, G. (1991). Science and technology of wood: Structure, properties, utilization New York: Chapman & Hall. 494. ISBN 0-412-07851-1.
    23. Vocel, M. (1983). Experimentální metody hodnocení tření a opotřebení (Experimental Methods of Friction and Wear Evaluation). Kovové materiály, 21, No. 6, 711-722. (in Czech). ISSN 0023-432X.
    24. Vocel, M., Dufek, V. et al. (1976). Tření a opotřebení strojních součástí (Friction and Wear of Machine Parts). Praha, SNTL. 376 p.
    25. ZAHRADNÍČEK, V., HORÁK, P. (2007). Moderní dřevostavby (Modern wooden houses). 1. vyd. Brno: ERA. 155. ISBN 978-80-7366-109-0.
    26. ČSN 01 5050. Opotřebení materiálu (Wear of materials). Názvosloví (Terminology). 1969. (in Czech).
    27. ČSN 01 5084. Stanovení odolnosti kovových materiálů proti abrazívnímu opotřebení na brusném plátně (Determination of metal materials resistance against wear by abrasive cloth). 1974. (in Czech).
    28. ČSN 49 0134. Drevo. Metóda zisťovania odolnosti proti oderu (Wood. Determination of abrasion resistance). 1984. (in Slovak).
    29. ČSN EN 13696. Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance. 2009.
    30. ČSN 91 0276. Nábytek. Metoda zjišťování odolnosti povrchu proti otěru (Furniture. Method of determining the surface resistance to abrasion). 1989. (in Czech).

    Return to the content