Manufacturing Technology 2014, 14(3):392-397 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/392

Analysis of Aluminium Alloys AlSi7Mg0.3 and AlMg3 by Means of X-Ray Diffraction

Jan Novotný, Jaromír Cais, Nataša Náprstková
Faculty of Production Technology and Management, J. E. Purkyne University in Usti nad Labem. Pasteurova 1, 400 96 Usti nad Labem. Czech Republic

Material crystal compositions and their phase structures have become the necessary and important part of the materials research and advanced technology in recent decades. Each property and information about material phase structure is more or less immediate way depending on the structure and crystal composition. Prerequisite of any technological breakthroughs in this area is therefore detailed information on the structural parameters of materials.

Keywords: X-ray diffraction, thermal expansion, material properties

Published: October 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novotný J, Cais J, Náprstková N. Analysis of Aluminium Alloys AlSi7Mg0.3 and AlMg3 by Means of X-Ray Diffraction. Manufacturing Technology. 2014;14(3):392-397. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/392.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. GIACOVAZZO, C. (2002) Fundamentals of Crystallography, Oxford University Press, USA
    2. BELAN, J. (2013) Study of advanced Ni - base alloy by quantitative metallography methods. In Manufacturing Technology, Vol. 13, No.FVTM UJEP, Ústí nad Labem, ISSN 1213-2489. Go to original source...
    3. ANDRŠOVA, Z., SKRBEK, B. (2012) The use of magnetic and ultrasonic structuroscopy for inspection of ADI/AGI castings. In Manufacturing Technology, Vol. 12, No. 12, FVTM UJEP, Ústí nad Labem, ISSN 1213-2489. Go to original source...
    4. ČERNOHORSKÝ, D., RAIDA, Z. (1999) Analýza a optimalizace mikrovlnných struktur, VUTIUM, Brno. ISBN 80-214-1512-6.
    5. VALVODA, V., M. POLCAROVÁ, M., LUKÁČ, P. (1992) Základy strukturní analýzy, Karolinum, Praha.
    6. STANČEKOVÁ, D., ŠEMCER, J., DERBAS, M., KURŇAVA, T (2013) Methods of Measuring of Residual Stresses and Evaluation of Residual State of Functional Surfaces by X-Ray Diffractometric Methods. In Manufacturing Technology, Vol. 13, No.4, FVTM UJEP, Ústí nad Labem, pp. 547-552. ISSN 1213-2489 Go to original source...
    7. SCHMIDOVÁ, L., BAKALOVA T., MALEC J. (2013) Using of Barkhausen Noise Analysis and X-Ray Diffraction for Evaluation Of Surface Integrity, In Manufacturing Technology, Vol. 13, No.4, FVTM UJEP, Ústí nad Labem, pp. 539-542. ISSN 1213-2489 Go to original source...
    8. MICHNA, Š., LUKÁČ, I., LOUDA, P. OČENÁŠEK, V., SCHNEIDER, H., DRÁPALA, J., KOŘENÝ, R., MIŠKUFOVÁ, A. at al. (2007) Aluminium material and Technologies from A to Z, Adin, Prešov, Slovakia, ISBN 978-80-89244-18-8
    9. WEISS, V., STRIHAVKOVA, E. (2012) Influence of the homogenization annealing on microstructure and mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy. In Manufacturing Technology, Vol. 12, No. 12. FVTM UJEP, Ústí nad Labem ISSN 1213-2489 Go to original source...
    10. BOLIBRUCHOVA, D., BRŮNA, M. (2013) Influencing the crystallization of secondary alloy AlSi6Cu4 with stroncium. In Manufacturing Technology, Vol. 13, FVTM UJEP, Ústí nad Labem ISSN 1213-2489
    11. NÁPRSTKOVÁ, N., SVOBODOVÁ, J., CAIS, J. (2013), Modification of AlSi7Mg0.3 alloy by strontium, In Manufacturing Technology, Vol. 13, No. 3, FVTM UJEP, Ústí nad Labem, pp. 373-380. ISSN 1213-2489 Go to original source...

    Return to the content