Manufacturing Technology 2015, 15(3):278-285 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/278

Application of Laser Shock Processing

Jan Brajer1,2, Jan Mádl1, Roman ©vábek2, Zdeněk Pitrmuc1, Danijela Rostohar2, Pavel Zeman1, José Luis Ocaña3
1 Department of Machining, Process Planning and Metrology, Czech Technical University in Prague, Technická 4, 166 07 Prague 6 Dejvice, Czech Republic
2 HiLASE Centre, Institute of Physics ASCR, Za Radnicí 828, 25241 Dolní Břeľany, Czech Republic
3 Centro Láser UPM (Universidad Politécnica de Madrid) Ctra. de Valencia, km. 7,3. 28031 Madrid. Spain

Laser Shock Processing (LSP), or strengthening the material surface by laser shock wave is very modern and progressive technique, which allows a significant increase in fatigue life of cyclically loaded parts. The compressive residual stresses are generated in the surface layer of material processed by laser beam, which can significantly improve the fatigue properties of the material and reduce the initiation and propagation of the surface cracks. This technique finds practical use of the most demanding applications like in the aerospace industry. For this reason, we are mapping the selected surface properties after the laser treatment for the better understaning of technology possibilities. After that another suitable applications can be found. It is also important to determine appropriate parameters for different types of material and requirements affecting the result.

Keywords: Laser shock processing, surface integrity, residual stress

Published: June 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Brajer J, Mádl J, ©vábek R, Pitrmuc Z, Rostohar D, Zeman P, Ocaña JL. Application of Laser Shock Processing. Manufacturing Technology. 2015;15(3):278-285. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/278.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. OCANA, J. L., MORALES, M., MOLPECERES, C. AND TORRES, J. (2004). Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments, Applied Surface Science,, pp. 242-248. Go to original source...
    2. CHASWAL, V. (2012). A study of Laser Shock Peening on Fatigue behavior of IN718Plus Superalloy. University of Cincinnati
    3. PEYRE, P., FABBRO, R., MERRIEN, P., Lieurade, H. P., (1996) Laser shock processing of aluminum alloys, application to high cycle fatigue behaviour. Materials Science and Engineering; A210:102-13. Go to original source...
    4. JOHNSON, J. N., RHODE, R. W., J. A., (1971) Study of Laser Shock Peening on Fatigue behavior of IN718Plus Superalloy, Applied Physics, 42, pp. 171-182
    5. MAAWAD, E., BROKMEIER, H., WAGNER, L., SANO, Y., GENZEL, C., (2011) Surface Coating Technology 205, pp. 3644-3650 Go to original source...
    6. SEE, D. W., DULANEY, J. L., CLAUER, A. H., TENAGLIA, R. D., (2002) Surf. Engng. 18, pp. 32-36 Go to original source...
    7. ZHOU, Z., BHAMARE, S., RAMAKRISHNAN, G., MANNAVA, S. R., LANGER, K., WEN, Y., QIAN, D., VASUDEVAN, V. K., (2012) Surface and Coatings Technology 206 (22), pp. 4619-4627 Go to original source...
    8. DANE, C. B., HACKEL, L. A., HALPIN, J. M., DALY, J., HARRISSON, J., HARRIS, F., (2000) Proceedings - Society of Photo-Optical Instrumentation Engineers, ISSN 1018-4732 Bellingham, WA, USA, 3887, pp. 211-221
    9. CHASWAL, V., MANNAVA, S. R., QAIN, D., LANGER, K.,VASUDEVAN, V. K., (2010) 2nd International Conference on LSP, San Francisco CA April pp. 17-21
    10. NAKANO H, TSUYAMA M, MIYAUTI S, SHIBAYANAGI T, TSUKAMOTO M, ABE N, J. (2010) Laser Micro Nanoeng. 5, 2, pp. 175-178 Go to original source...
    11. CLAUER, A. H., LAHRMAN, D. F., (2001) Key Eng. Mat. 197, pp. 121-142 Go to original source...
    12. WEERTMAN, J., (1986) Mechanics of Materials 5 (1), pp. 13-28 Go to original source...
    13. KOCKS, U. F., MECKING, H., (2003) Progress Material Science 48 (3), pp. 171-273 Go to original source...
    14. PEYRE, P., FABBRO, R., MERRIEN, P., LIEURADE, H.P., (1996) Materials Science and Engineering A210 pp. 102-113 Go to original source...
    15. TRDAN, U., OCANA, J. L., GRUM, J., (2011) Mechanical Engineering., 57/5, 385
    16. SVABEK, R., ROSTOHAR, D., LUCIANETTI, A., ENDO, A., MOCEK, T., (2014) Diode-pumped kW - class lasers for efficient peening, HiLASE Project
    17. WILCOX, R., BROWNING, D., PENKO, F., (1998) Third annual international conference on solid state lasers for application to inertial confinement fusion, Monterey, California, June 7-12th.
    18. HRABOVSKY, T., NESLUSAN, M., MICIETA, B., CILLIKOVA, M., MICIETOVA, A., (2014) 1 Barkhausen Noise Emission of Surfaces Produced by Hard Milling Process. In: Manufacturing Technology, Vol.14, No. 1, pp. 17-23. ISSN 1213-2489. Czech Republic. Go to original source...
    19. MADL, J., RAZEK, V., KOUTNY, V., KAFKA, J., (2013) 2 Surface Integrity in Notches Machining. In: Manufacturing Technology, Vol.14, No. 1, pp.17-23. ISSN 1213-2489. Czech Republic. Go to original source...
    20. STANČEKOVÁ, D., SEMCER, J., DERBAS, M., KURNAVA, T., (2013) Methods of Measuring of Residual Stresses and Evaluation of Residual State of Functional Surfaces by X-Ray Diffractometric Methods. In: Manufacturing Technology, Vol.13, No. 4, pp. 547-552. ISSN 1213-2489. Czech Republic. Go to original source...
    21. NESLUSAN, M., ROSIPAL, M., KOLARIK, K., OCHODEK, V., (2012) Application of Barkhausen Noise for Analysis of Surface Integrity after Hard Turning. In: Manufacturing Technology, Vol.12, No. 1, pp. 60-65. ISSN 1213-2489. Czech Republic. Go to original source...
    22. MADL, J., (2012) Surface Properties in Precise and Hard Machining. In: Manufacturing Technology, Vol.12, No. 1, pp. 158-166. ISSN 1213-2489. Czech Republic. Go to original source...
    23. CUBAN J., CALONIUS O., PIETOLA M., JERSAK J. (2011) 11 Fatigue life and surface integrity measurements of EN S355J2 steel used in hydraulic components. In: Manufacturing Technology, Vol.12, No. 1, pp. 5-11. ISSN 1213-2489. Czech Republic. Go to original source...
    24. SVABEK, R., ROSTOHAR, D., LUCIANETTI, A., MOCEK, T., (2014), HiLASE multi-slab laser system: a tool for efficient peening. In: Proceedings of the Manufacturing Science and Engineering Conference. June 9-13, 2014, Detroit, Michigan, USA ASME2014
    25. MADL, J., (1988) Experimentální metody v teorii obrábění, ČVUT, Praha
    26. Richard D. Tenaglia & David F. Lahrman, Box 1. The laser-peening proces Surface treatment: Shock tactics Nature Photonics 3, 267 - 270 (2009) ISSN: 1749-4885

    Return to the content