Manufacturing Technology 2015, 15(6):991-995 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/6/991

Rollers Vibration of Pipe Conveyor

Frantisek Klimenda, Blanka Skocilasova
Faculty of Production Technology and Management, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic

This article is deals of noise and vibration measurement of rollers for belt conveyor. In the first part of article a stand measuring is described and individual rollers types which were measured. There are five types of rollers for measurement. The first type are the Transroll rollers which were measured with the rubber pads. The second type are the Transroll rollers again. The third type are the Sandvik rollers and the fourth type are "Italian" rollers. Process of noise and vibration measurement of the individual rollers types is given. In conclusion of this article is noise and vibration measurement evaluation. Compared of the Transroll roller with pad and without pads is given. Three the highest acceleration values in depending on the frequency of vibration in individual directions (x, y, z) are given.

Keywords: Belt conveyor, Roller, Vibration, Noise

Published: December 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Klimenda F, Skocilasova B. Rollers Vibration of Pipe Conveyor. Manufacturing Technology. 2015;15(6):991-995. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/6/991.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. NOVÝ, R. (2000). Hluk a chvění, ČVUT Praha, ISBN 80-02246-3
    2. APETAUR, M. (2007). Akustika výrobních strojních celků a výrobních prostor, UJEP Ústí nad Labem, ISBN 978-80-7044-933-2
    3. BARON, R. (2003). Industrial Noise Control and Acoustic, New York, Marcel Deckker, ISBN 0-8247-0701-X
    4. NOVÝ, R., KUČER, M. (2009). Snižování hluku a vibrací, ČVUT Praha.
    5. KLIMENDA, F., SVOBODA, M., RYCHLÍKOVÁ, L., PETRENKO, A. (2015). Investigation of Vertical Vibration of a Vehicle Model Driving Through a Horizontal Curve, Manufacturing Technology, Vol 15, No 2, ISSN 1213-2489 Go to original source...
    6. GERLICI, J., LACK, T., HARUČINEC, J. (2013). The Test Stand Load Modulus Implementation for the Realistic Railway Operation in the Laboratory Conditions, Manufacturing Technology, Vol 13, No 4, ISSN 1213-2489 Go to original source...
    7. DIŽO, J. (2015). Evaluation of Ride Comfort for Passengers by Means of Computer Simulation, Manufacturing Technology, Vol 15, No 1, ISSN 1213-2489 Go to original source...
    8. KLIMENDA, F., SOOUKUP, J., HEJMA, P. (2015). Vybrace válečků trubkového dopravníku. In. Sborník příspěvků na CD ROM z XIII. mezinárodní konference Dynamika tuhých a neformovatelných těles 2015, FVTM UJEP v Ústí n. L., 2015. ISBN 978-80-7414-914-6

    Return to the content