Manufacturing Technology 2016, 16(1):26-29 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/1/26

Stability of the Casting Process According to the Method BOST

Stanisław Borkowski, Manuela Ingaldi, Piotr Sygut, Dorota Klimecka-Tatar
Czestochowa University of Technology, Faculty of Management, Institute of Production Engineering, al. Armii Krajowej 19b, 42-200 Czestochowa, Poland

Process stability is one of the factors determining high quality of the products. By stable process, operations conducted in order to produce a given product are repeatable, and at the same time products manufactured in such process are repeatable and theirs quality is predictable. In the article the BOST method was used to evaluate casting process stability. The research in from of a survey was conducted in one of the Polish foundry. The results were presented in form of 2x2 matrix. This matrix has two variables: process stability (X axis) and product quality (Y axis). Employees quite highly evaluated the process stability, and medium and low product quality. Which means that the research foundry is located in the B zone of the map of process stability, which is referred as "Fundamental changes in the process".

Keywords: Stability, Quality, Foundry, Foundry products, BOST

Published: February 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Borkowski S, Ingaldi M, Sygut P, Klimecka-Tatar D. Stability of the Casting Process According to the Method BOST. Manufacturing Technology. 2016;16(1):26-29. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/1/26.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. INGALDI, M. (2014). Analiza stabilności procesu w wybranej odlewni. In: Toyotaryzm. Zagadnienia kontroli w metodzie BOST. Borkowski S., Ingaldi M. (Ed.), pp. 98-109, Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji, Częstochowa.
    2. BORKOWSKI, S., INGALDI, M. (2015). Evaluation of the processes stability in metal industry. In: METAL 2015: 24th International Conference on Metallurgy and Materials. Ostrava: TANGER.
    3. SYGUT, P., LABER, K., BORKOWSKI, S. (2012). Investigation of the non-uniform temperature distribution on the metallic charge length during round bars rolling process. In: Manufacturing Technology, Vol. 12, No. 13, pp. 260-263. Go to original source...
    4. KLIMECKA-TATAR, D. (2014). The Powdered Magnets Technology Improvement by Biencapsulation Method and Its Effect on Mechanical Properties. In: Manufacturing Technology, Vol.14, No. 1, pp. 30-36. Go to original source...
    5. KARDAS, E. (2013). The analysis of quality of ferrous burden materials and its effect on the parameters of blast furnace process. In: Metallurgy, vol. 52 (2), pp. 149-152.
    6. PUSTEJOVSKA, P., JURSOVA, S., BROZOVA, S., SOUSEK, J. (2013). Effect of waste and alternative fuels on blast-furnace operation. In: Metallurgist, Vol. 56, Iss. 11-12, pp. 908-911. Go to original source...
    7. INGALDI, M., BORKOWSKI, S. (2014). Recycling Process of the Aluminium Cans as an Element of the Sustainable Development Concept. In: Manufacturing Technology, Vol.14, No 2, pp.172-178. Go to original source...
    8. BORKOWSKI, S. (2012). Toyotaryzm. Wyniki badań BOST. Wyd. PTM, Warszawa.
    9. BORKOWSKI, S. (2012). Zasady zarządzania Toyoty w badaniach. Wyniki badań BOST. Wyd. PTM, Warszawa

    Return to the content