Manufacturing Technology 2016, 16(1):248-253 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/1/248
Laser Hardening of the Functional Surfaces of Machine Tools
- Faculty of Production Technology and Management, University of J. E. Purkyně in Usti nad Labem, Czech Republic
The purpose of using modern technology is to reduce costs, facilitate the work and simplify as far as the most comprehensive set of operations. One of many modern technological processes involved in the refining of materials are technologies of surface hardening using a laser beam. This method can harden precisely defined areas with minimal thermal influence of surrounding areas it is possible to achieve less residual stress and less distortion of components compared the volumetric hardening, it is also possible to use controlled robotic units and all for the absence of cooling, which proceeds spontaneously to the surrounding material itself and atmosphere. These advantages of laser surface hardening are used by companies for which the prospect of minor damage to the material, increase of the material durability, material stiffness ensuring etc. is initiation for the use of modern technology.
Keywords: laser hardening, cast iron, hardness, microstructure
Published: February 1, 2016 Show citation
References
- PLUHAŘ, J., KORITTA, J. (1977). Strojírenské materiály. Vyd. 2., přeprac. Praha: SNTL, 562 s. Redakce báňské a strojírenské literatury. ISBN 04-212-77.
- HRABĚ, P., CHOTĚBORSKÝ, R. (2005). Zvyąování ľivotnosti abrazivně opotřebených strojních částí. MM Průmyslové spektrum. Praha: Vogel Publishing, 18. 5. roč. 2005, č. 5.
- SCHUBERT, S. (2011). Kalení laserem urychluje výrobu součástí a nástrojů. MM Průmyslové spektrum [online]. Praha: Vogel Publishing, č. 7 [cit. 2015-05-03]. Dostupné z: http://www.mmspektrum.com/clanek/kaleni-laserem-urychluje-vyrobu-soucasti-a-nastroju.html
- Laserové kalení. VÚTS Liberec [online]. 2013 [cit. 2015-05-03]. Dostupné z: http://www.vuts.cz/laserove-kaleni-2.html
- ZATLOUKAL, P. (2007). Tepelné zpracování laserem. Welding.cz [online].[cit. 2015-05-03]. Dostupné z: http://www.welding.cz/laser/tepelne.htm
- Schématické zobrazení laserového kalení. 2015. KULIČKOVÉ ©ROUBY KUŘIM, a.s. [online]. [cit. 2015-05-09]. Dostupné z: http://www.ks-kurim.cz/laserove-kaleni/
- Legovaná nástrojová ocel pro práci za studena a na pruľiny 102Cr6. ING. FÜRBACHER. M-Busch [online]. 2008, 3. 5. [cit. 2015-01-01]. Dostupné z: http://www.techportal.cz/33/legovana-nastrojova-ocel-pro-praci-zastudena-a-na-pruziny-102cr6-uniqueidmRRWSbk196FNf8-jVUh4EoVtBWjC68CLJHLE75AcqcMO6VlftQMFg/?sekce=34
- ZETEK, M., ČESÁKOVÁ, I., SAMCOVÁ, M., SOUKUP, O. (2011). Obrábění tepelně zpracovaných ploch laserem. Strojírenská technologie. XVI(5): 49-53. ISSN 1211-4162).
- LUCEFIN GROUP. Technical card. Gruppo Lucefin [online]. 2011 [cit. 2015-03-31]. Dostupné z: http://www.lucefin.com/wp-content/files_mf/1.2067102cr6ing.pdf
- Materiálový list jakosti Unibar 250: Kontinuálně litý litinový profil. UCB Technometal [online]. 2013, 1. 7. [cit. 2015-01-01]. Dostupné z: http://www.ucbtechnometal.cz/storage/get/143-unibar-250-cz.pdf
- KŘÍ®, A. (2004). METAL 2004: 13. mezinárodní konference metalurgie a materiálů : sborník přednáąek = 13th international metallurgical. Vyd. 1. Ostrava: Tanger, 91 s. ISBN 80-859-8895-X.
- G 99 - 034. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. 2014. West Conshohocken Spojené státy Americké): ASTM International.