Manufacturing Technology 2016, 16(6):1291-1296 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1291

A Multi-Directional Magnetic Treatment Approach to Improve the Dimensional Stability of Bearing Rings

Xuemei Li1, Qingsheng Xie1, Shaobo Li1, Wangbiao Qiu2
1 Key Laboratory of Advanced Manufacturing Technology (Guizhou University), Ministry of Education, Guiyang Guizhou 550025, China
2 Engineering Training Center, Guizhou University, Guiyang Guizhou 550025, China

Comparing with one directional magnetic treatment, a multidirectional magnetic treatment is applied to reduce residual stress in thin-walled bearing rings in order to improve the dimensional stability of bearing rings. The magnetic field was applied in both the axial and the radial directions of the thin walled bearing rings respectively. Six months of repeated testing results demonstrated that the dimension of bearing rings after magnetic treatment had no significant change. Experimental results shows both the major axis(the longer axis of an ellipse)and the minor axis(the shorter axis of an ellipse)appear shorten tendency and the dimension of bearing rings tends to be stable. Thin-walled uniform radial pressure deformation formulas are applied to calculate the reduced stress, and the maximum reduction is up to 45.97MPa. Research shows the multi-directional magnetic treatment can improve the dimensional stability of bearing rings and used in practical engineering.

Keywords: Multidirectional magnetic treatment, Residual stress, Dimensional stability

Published: December 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Li X, Xie Q, Li S, Qiu W. A Multi-Directional Magnetic Treatment Approach to Improve the Dimensional Stability of Bearing Rings. Manufacturing Technology. 2016;16(6):1291-1296. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1291.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. HÁJEK, J., KŘÍŽ, A., HRDLIČKA, V. (2015). The Heat Treatment of Aluminium Bronzes. In: Manufacturing Technology, Vol. 15, No. 1, pp. 35-41. Go to original source...
    2. KOVALČÍK, T., STOULIL, J., SLÁMA, P., VOJTĚCH, D. (2015). The Influence of Heat Treatment on Mechanical and Corrosion Properties of Wrought Aluminium Alloys 2024 and 6064. In: Manufacturing Technology, Vol. 15, No. 1, pp. 54-61. Go to original source...
    3. DJURIC, D., VALIANT, R., KERSCHBAUMER, K. (2011). Vibration stress relief treatment of welded high-strength. In: Rivista Italiana della Saldatura, Vol. 63, No. 1, pp. 65-72.
    4. CAI, ZHIPENG., LIN, JIAN., ZHOU, LIANG. ZHAO, HAIYAN. (2005). Effect of the magnetic strain vibration in rediual stress reduction by pulsed magnetic treatment. In: Jixie Gongcheng Xuebao/Chinese Journal of Mechanical (English), Vol. 41, No. 7, pp. 216-220. Go to original source...
    5. WU GENG, HAI YAN ZHAO,LU A L, HUI ZHEN FANG.(2002). The micro mechanism of low frequency alternating magnetic treatment to reduce internal stress in steel material. In: Transactions of the China Welding Institution. Vol. 23, No. 1, pp. 53-58.
    6. OLIKER, PODREZOV, YARMATOV, GRIDASOVA, GRECHISHKIN. (2012). Effect of magnetic treatment on the microstructure and strength of WC-Co detonation-sprayed coatings. In: Powder Metallurgy and Metal Ceramics, Vol. 5, No. 2, pp. 485-490. Go to original source...
    7. VOROB'EV, DUBINSKII. (2014). Effect of treatment by a pulsed magnetic field on the hardness and fracture strength of a hypereutectoid tool steel. In: Physics of Metals and Metallography, Vol. 115, No. 8, pp. 805-808. Go to original source...
    8. DRAGOSHANSKI, SHULIKA, POTAPOV, TIUNOV. (2011). Domain structure and properties of soft magnetic iron-based alloys with different magnetic treatment. In: Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. 168. No. 3. pp. 219-222, 2011. Go to original source...
    9. OLIKER, V. E. (2010). Effect of magnetic treatment on the microstructure of NiAl-Re alloy. In: Powder Metallurgy And Metal Ceramics, Vol. 49, No. 3, pp. 245-252. Go to original source...
    10. VOROB'EV, DUBINSKII.(2010). A study of martensite decomposition in a 65G steel upon magnetic pulse treatment. In: Physics of Metals and Metallography, Vol. 109, No. 3, pp. 261-264. Go to original source...
    11. A.L. LU, F. TANG, X, J. LUO, J.F. MEI, H.Z. FANG. (1998). Research on residual stress reduction by strong pulsed magnetic treatment. In: Journal of Materials Processing Technology. Vol. 74, No. 2. pp. 259-262. Go to original source...
    12. MARIN, GEORGIANA ROSU., SAMOILESCU, GHEORGHE, BALTAG, OCTAVIAN. (2014). The effect of a magnetic treatment on ship magnetic signature. In: International Symposium on Fundamentals of Electrical Engineering, ISFEE.
    13. KOVALEV, S. L., SMIRNOV, A. E., VOLOSHIN, A. E. (2007). Effect of magnetic treatment of KDP crystals on their interaction with a saturated solution. In: Crystallography Reports, Vol. 52, No. 1, pp. 167-169. Go to original source...
    14. ELISEEVA, GRIDASOVA, TIMOFEEVA, (2010). High-temperature oxidation of sprayed NiAl-Re coatings subjected to magnetic treatment. In: Powder Metallurgy and Metal Ceramics, Vol. 51, No. 1. pp. 485-490.
    15. TANG F, LU A L, MEI J F. (1988). Research on residual stress reduction by a low frequency alternating magnetic field. In: Journal of Materials Processing Technology, Vol. 74, No. 5. pp. 255-258.
    16. KLAMECKI, BARNEY E. (2002). Residual stress reduction by pulsed magnetic treatment. In: Journal of Materials Processing Technology. Vol. 141, No. 3, pp. 385-394. Go to original source...
    17. SONG, YANLI1; HUA, LIN. (2012). Mechanism of Residual Stress Reduction in Low Alloy Steel by a Low Frequency Alternating Magnetic Treatment. In: Journal of Materials Science and Technology. Vol. 28, No. 8. pp. 803-808. Go to original source...
    18. HUANG, SHIWEI., ZHAO, HAIYAN., LIN, JIAN.,CAI, ZHIPENG., LU, ANLI. (2006). Effect of magnetic field direction during magnetic treatment to reduce residual welding stresses. In: Qinghua Daxue Xuebao/Journal of Tsinghua University, Vol. 46, No. 8, pp. 1361-1364.
    19. STEPANOV, G.V., KHARCHENKO, V.V., KOTLYARENKO, A.A., BABUTSKII..A.I. (2013). Effect of pulsed magnetic field treatment on the fracture resistance of a cracked specimen. In: Strength of Materials, Vol. 45, No. 2, p p.154-162. Go to original source...
    20. R.J.ROARK.W.C. (1985). Stress-strain formula, pp. 358-360. Science Publisher, China.

    Return to the content