Manufacturing Technology 2017, 17(1):39-44 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/1/39

Influence the Composition of the Core Mixture to the Occurrence of Veining on Castings of Cores Produced by Cold-Box-Amine Technology

Martina Hrubovčáková, Iveta Vasková, Martin Conev, Marianna Bartošová, Peter Futáš
Institute of Metallurgy, Faculty of Metallurgy, Technical University in Košice, Slovakia

Method of cold-box-amine is widespread and frequently used technology for the production of cores. [1] Characteristic defect castings of ferrous alloys, which often accompanies the use of amine - Cold box cores are veining . Survey , it was found that 77 % of those surveyed foundries have problems with veining, 71 % foundries solves this problem ( or try to tackle ) anti veining ingredients in nuclear and molding compounds , but only 29 % considered their " antiveining " method for successful and favourable. [2] Article discusses the possibilities of elimination veining. Ingredients called additives lower the temperature at which the SiO2 begin to soften and form a melt at the surface of the grains, reduce the reactivity and increase the temperature of transition to a tridimit and cristobalit. These passages encourage increased tensions subsurface sand and reduce stress for the formation of veining on the surface of the core or mold. Experiments were performed to assess the impact of silica sands and the impact of additives on the quality of the casting surface.

Keywords: core mixture, veining, cold-box-amine

Published: February 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Hrubovčáková M, Vasková I, Conev M, Bartošová M, Futáš P. Influence the Composition of the Core Mixture to the Occurrence of Veining on Castings of Cores Produced by Cold-Box-Amine Technology. Manufacturing Technology. 2017;17(1):39-44. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/1/39.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BRACE R., STUART W., BURIAN A., NOVOTNÝ J. (1999). Production of molds and cores to self-hardening mixture with a binder system alphaset. Slévárenství, 1999. ISSN 0037-6825
    2. NĚMEC, M., BEDNÁŘ, B., STUNOVÁ, B. (2009). Teorie slévání, ČVUT, Praha
    3. JELÍNEK P. (1996). Casting sand - sand mixtures connective system. ISBN 80-7078-326-5, VŠB - TU Ostrava 1996
    4. KARSAY, S.I. (1976). Ductile Iron vol. 1 - Production. QIT - Fer et Titane Inc, Montreal
    5. HRUBOVČÁKOVÁ M, VASKOVÁ I. (2015). Possibilities of burrs elimination from cores produced with cold-box-amine technology, Acta metallurgica slovaca. Roč. 21, č. 1 (2015), s. 78-85. - ISSN 1335-1532 Go to original source...
    6. GEDEONOVÁ, Z. (1990). Teória zlievárenských pochodov, Alfa, Košice
    7. VASKOVÁ I., ŠEBEK P., BARTO M. (2006). Practical experience with core production technology of cold box. Acta mechanica slovaca, 2b / 2006, ročník 10, Košice, ISSN 1335 - 2393, str. 449 - 454
    8. FLORES C., RAMOS E., RAMÍREZ M., GONZÁLES C. (2010). Applied pressure control risering of a ductile iron sand casting, In: Procceedings of METAL 2010, Tanger, s.r.o., Ostrava
    9. VASKOVÁ I., SMOLKOVÁ M., MALIK J., EPERJEŠI Š. (2008). Experience in forming and core mixtures by Alphaset technology, archives of foundry engineering published quarterly as the organ of the foundry commission of the polish academy of sciences ISSN (1897-3310) volume 8 issue 2/2008 141 - 144 31/2
    10. LATTNER, M., HOLESOVSKY, F. (2014). Effect of Machining the Load Capacity Notched Components. In: Manufacturing Technology, vol. 14, 2014, pp. 47-50 Go to original source...
    11. FOŠUM, J., ŠEBESTA, B. (2003). Recent and perspective methods testing of sand mixtures in foundries. Vol. 42, 2003, no.10, p.410 - 415, (in Czech). slévarenství, ISSN 0037-6825
    12. JELÍNEK P., MIKŠOVSKÝ F. (2004). The mechanism of the products. International Conference: casting defects caused by mold materials. p. 17, ISBN 80-02-01632-7, Mílovy 2004
    13. DZIAKOVÁ M., VASKOVÁ I., FECKO D. (2010). Influence of Operating factors on properties of furan mixtures, Acta Metallurgica slovaca, vol. 16, 2010, no. 1, p. 58-63, ISSN:1335-1532
    14. DAHLMANN M. ET AL. (2002). Synthetic foundry grog brings new opportunities, Slévarenství 2002, č.5-6, s.181-184 ISSN 0037-6825
    15. WEICKER, G., VONDRÁČEK, R. (1999). Special binder systems cold box and alternatives for the production of cores in foundries light metal alloys, Slévárenství 1999,č.5,s.265-269 ISSN 0037-6825
    16. CONEV M., VASKOVÁ I., HRUBOVČÁKOVÁ M., HAJDÚCH P. (2016). Impact of Silica Sand Granulometry on Bending Strength of Cores Produced by ASK Inotec Process. In: Manufacturing Technology, vol. 16, 2016, p. 327-334, ISSN 1213-2489 Go to original source...
    17. DRBÚL, M., STANČEKOVÁ, D., BABÍK, O., HOLUBJAK, J., GÖRÖGOVÁ I., VARGA, D. (2016). Simulation Possibilities of 3D Measuring in Progressive Control of Production. In: Manufacturing Technology, vol. 16, 2016, p. 53-58, ISSN 1213-2489 Go to original source...
    18. STANKOVIČOVÁ, Z., DEKÝŠ, V., NOVÁK, P., SAPIETA, M. (2015). Numerical Simulation of Thermoelastic Stress Analysis. In: Manufacturing Technology, vol. 15, 2015, p. 925-930, ISSN 1213-2489 Go to original source...

    Return to the content