Manufacturing Technology 2017, 17(1):100-103 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/1/100

Results if Machining by Tool of Self-Propelled Rotation Due to Wear

Karol Vasilko1, Jozef Pilc2
1 Faculty o Manufacturing Technologies Technical Uniersity of Košice, Bayerova 1, 080 01 Prešov, SR
2 Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, 010 26 Žilina, SR

On the base of a well-known method of machining with disk-shaped rotating tool the self-propelled tool was designed. The principle is based on braking the tool rotation during machining, until the moment of determined wear criterion on the tool flank. As with the growth of tool wear the force of cutting resistance increases, it is possible to use it for automatic tool swinging into a new position by which a new part of cutting edge comes into engagement. The paper describes the tool design, theoretical analysis of Rz after machining and actual experimental machining results.

Keywords: machining, disk-shaped tool, quality of machined surface, cutting edge

Published: February 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K, Pilc J. Results if Machining by Tool of Self-Propelled Rotation Due to Wear. Manufacturing Technology. 2017;17(1):100-103. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/1/100.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. KALPAKJIAN, S. (2006). Manufacturing Engineering and Technology. New York: Eddison Wesley Publishing Company, 2006, 1999 p., ISBN 0-201-121849-7
    2. GRZESIK, W. (2010). Podstavy skrawania materialow konstrukccyjnych. Wydawnictwa Naukowo-Techniczne, Warszawa, 2010, 526 p., ISSN 978-83-204-3668-6
    3. NOWICKI (1991). Struktura geometryczna powierzchni. Chropowatość i falistość powierchni. Warszawa, Wydawnictwo Naukowo-Techniczne, 1991
    4. CARLASON, T., STJERNSTOFT. (2001). A Model for Calculation of the Geometrical Shape of the Cutting Tool - Workpiece Interface. Annals of the CIRP Vol. 50/1/2001, pp. 41-44. Go to original source...
    5. ARMAREGO, E. J. A., KALLA, R. K. (1997). Predictive Cutting Model for Forces and Power in Self-Propelled Rotary Tool Turning Operations. Annals off the CIRP Vol. 46//1/1997, pp. 19-24 Go to original source...
    6. PING CHEN. (1992). High-Performance Machining of SiC Whisker-Reinforced Aluminium Composite by Self-Propelled Rotary Tools. Annals of the CIRP ol.41/1/1992, pp. 5962. Go to original source...
    7. MAKEDONSKI, A. (2011). Unconventional machining method for enhancing the durability of tools and strength of the specimens bonded. Manufacturing Technology, 2011, Vol. 11, No. 11, pp.49-55. Go to original source...
    8. VASILKO, K., PILC, J., Patent SR 208608. Rezný nástroj s pootáčavou platničkou. 07.01.84.
    9. MURČINKOVÁ, Z., MURČINKO, J. (2011). Machine-tool-workpiece system dynamic analysis approaches by use of CAE systems. Technológ, 2011, Vol. 5, No. 4, pp. 123-126.
    10. JERSAK, J. et al. (2010). Surface integrity of hardened bearing steel after milling. Manufacturing Technology, Vol 10, 2010, pp. 80-87. Go to original source...
    11. NOVÁK, M. (2011). Surface quality of hardened steels after grinding. Manufacturing Technology, Vol. 11, 2011, pp. 55-59. Go to original source...
    12. LEGUTKO, S., KROLSZYK, G., KROLCZYK, J. (2014). Quality Evaluation of Surface Layer in Highly Accurate Manufacturing. Manufacturing Technology, 2014, No. 1, pp. 50-56 Go to original source...
    13. MURČINKO, J., MURČINKOVÁ, Z. (2009). Monitoring of vibrations dangerous limits in machining process of BÖHLER M 201 material. Proceedings in Manufacturing Systems. 2009, Vol. 4, pp. 217-220.

    Return to the content