Manufacturing Technology 2017, 17(2):231-237 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/231

Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade 2/AISI 316L

Jaromir Moravec1, Martina Dikovits2, Coline Beal2, Iva Novakova1, Rebecca Chandezon2, Jiri Sobotka1
1 Technical University of Liberec. Studentská 2, 461 17 Liberec 1. Czech Republic
2 Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria

The creation of the heterogeneous joints at materials with the different physical and mechanical properties is always problematic. As one of methods by which can be achieved very good results is there a diffusion welding. The aim of paper is to show the possibilities of diffusion welding utilization at creation the heterogeneous joints between Titan grade 2 and high-alloyed austenitic steel AISI 316L. The fundamental theory of diffusion and also scheme and realization of experimentally created diffusion welds in the thermal-mechanical simulator Gleeble® 3500 is described in the article. Furthermore, procedure of technological parameters selection when optimization of heterogeneous joint strength properties including metallographic evaluation are taken into account, are also presented.

Keywords: diffusion welding, Gleeble® 3500 and 3800, 316L steel, Ti Grade 2, processing parameters

Published: April 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Moravec J, Dikovits M, Beal C, Novakova I, Chandezon R, Sobotka J. Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade 2/AISI 316L. Manufacturing Technology. 2017;17(2):231-237. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/231.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. PLUHAŘ, J., A. PUSKAR, J. KOUTSKÝ, J. MACEK and V. BENEŠ (1987). Fyzikální metalurgie a mezní stavy materiálu, SNTL/ALFA, Praha.
    2. SYMONOVA, A., F. DUCOBU and V. WEISS (2016). The Mechanics of Machining Ultrafine-Grained Grade 2 Ti Processed Severe Plastic Deformation. In: Manufacturing Technology, Vol. 16, No. 3, pp. 627-633. Go to original source...
    3. VOLENIK, O. (1964). Difuze v kovech. In: ČS časopis pro fyziku.
    4. BAČA, A., R. KONEČNÁ, G. NICOLETTO and L. KUNZ (2015). Effect of Surface Roughness on the Fatigue Life of Laser Additive Manufactured Ti6Al4V Alloy, In: Manufacturing Technology, Vol. 15, No. 4, pp. 498-502. Go to original source...
    5. S. KUNDU, S. CHATTERJEE (2006). Interfacial microstructure and mechanical properties of diffusion-bonded titanium-stainless steel joints using a nickel interlayer. In: Materials Science and Engineering A, Vol. 425, pp. 107-113. Go to original source...
    6. S. KUNDU, S. CHATTERJEE (2008). Characterization of diffusion bonded joint between titanium and 304 stainless steel using a Ni interlayer. In: Materials Characterization, Vol. 59, pp. 631-637. Go to original source...
    7. S. KUNDU, M. GHOSH, A. LAIK, K. BHANUMURTHY, G.B. KALE and S. CHATTERJEE (2005). Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. In: Materials Science and Engineering A, Vol. 407, pp. 154-160. Go to original source...
    8. DOPJERA, D., R. KOŇÁR and M. MIČIAN (2014). Ultrasonic Testing of Girth Welded Joint with TOFD and Phased Array. In: Manufacturing Technology, Vol. 14, No. 3, pp. 281-286. Go to original source...
    9. KOLAŘÍK, L., M. KOLAŘÍKOVÁ, P. NOVÁK, M. SAHUL and P. VONDROUŠ (2013). The Influence of Nickel Interlayer for Diffusion Welding of Titanium and Austenitic Steel. In: 22nd International Conference on Metallurgy and Materials METAL 2013. Ostrava: TANGER Ltd., s. 508-513.
    10. KOLAŘÍK, L., M. KOLAŘÍKOVÁ and P. VONDROUŠ (2014). Mechanical Properties of Interface of Heterogeneous Diffusion Welds of Titanium and Austenitic Steel. In: Key Engineering Materials, Vol. 586, pp. 178-181. Go to original source...
    11. ARUN, S., N. HARIKRISHNA, A. J. JAHANGIR, A. JEGANATHPRABHU, W. EDWIN LYONAL a G. MAHANDEVAN (2015). Optimization of Process Parameters of Diffusion Bonding in Titanium with Stainless Steel. In: International Journal of Engineering and Technology [online]. Vol. 4, No. 1, ISSN 2319-5991. Dostupné z: http://www.ijerst.com/ijerstadmin/upload/IJEETC_55235855a70b6.pdf#page=5&zoom=auto,-178,460.
    12. ALEMAN, B., L. GUTIERREZ and J. URCOLA (1993). Interface microstructures in diffusion bonding of titanium alloys to stainless and low-alloy steels. In: Materials Science and Technology, Vol. 9, pp. 633-641. Go to original source...
    13. M. GHOSH, K. BHANUMURTHY, G.B. KALE, J. KRISHNAN, S. CHATTERJEE (2003). Diffusion bonding of titanium to 304 stainless steel. In: Journal of Nuclear Materials, Vol. 322, pp. 235-241. Go to original source...
    14. M. GHOSH, S. CHATTERJEE (2005). Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. In: Materials Characterization, Vol. 54, pp. 327-337. Go to original source...
    15. M. GHOSH, S. DAS, P.S. BANARJEE, S. CHATTERJEE (2005). Variation in the reaction zone and its effects on the strength of diffusion bonded titanium-stainless steel couple. In: Materials Science and Engineering A, Vol. 390, pp. 217-226. Go to original source...

    Return to the content