Manufacturing Technology 2017, 17(2):261-267 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/261

The Proposal How to Make the Basic Machining Technologies - Turning, Milling, Planing - More Productive

Karol Vasilko, Zuzana Murčinková
Faculty of Manufacturing Technologies, Technical University of Košice, 080 01 Prešov, Bayerova 1

The current manufacturing production is characterised by increasing level of automation, emerging of the new light-weight and high-stiff materials that are technologically difficult to produce. These trends have significant impact on production productivity. The automation has brought significant reduction of non-productive time (fast workpiece and tool exchange, automatic control of product quality during technological process). In this situation, the machining time becomes the limiting factor. In present, the reducing of the machining time is possible to make only by either significant changes in conventional technologies or application of new technological principle. However, these secondary solutions in some production section are not sufficient because it requires a global solution. An example of un-equal time continuity in link production is fact that one pressing machine with the time per one piece in seconds can supply dozen of lathes with the time per one piece in minutes. The paper provides also the proposal to the productivity increase of critical technologies as turning and milling.

Keywords: productivity, machining time, technology, automation, product, material

Published: April 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K, Murčinková Z. The Proposal How to Make the Basic Machining Technologies - Turning, Milling, Planing - More Productive. Manufacturing Technology. 2017;17(2):261-267. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/2/261.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. HOLEŠOVSKÝ, F., NAPRSTKOVÁ, N., NOVÁK, M. (2012). GISC for Grinding Process Optimalization. Manufacturing Technology 12/12. 2012, pp. 22-26, ISBN 1213-2489. Go to original source...
    2. KUNDRAK, J. (2011). Alternative machining procedures of hardened steels. Manufacturing Technology, 2011, 11, pp. 32-39, ISBN 1213-2489. Go to original source...
    3. LOLADZE, T. N. (1978). Osnovnyje voprosi optimizacii mašinostrojiteľnogo proizvodstva. Sabčota Sakartvelo, 1978, 245 s.
    4. Patent SR, č. 287347 Výkonná čelná fréza.
    5. Patent SR, č. 150486. Nástroj na sústruženie.
    6. PALMAI, Z. (2012). Model of chip formation during turning in the presence of a built-up edge. Manufacturing Technology. 2012, 12/2 pp. 207-212, ISBN 1213-2489. Go to original source...
    7. ROMGNOLO, G. Plaquette de coupe amovible pour e croutage de barres sur machine sans centre. French Patent No. 7528886.
    8. SEDLÁK, J. et al. (2015). High-Speed Cutting of Bearing Rings from Material 100Cr6. Manufacturing Technology, 2015, Vol 15, No. 5, pp. 899-908, ISBN 1213-2489. Go to original source...
    9. SCHULZ, H., SCHȔTZER, K. (2004). The History of High-Speed machining. Germany: Sao Paolo: Ed. Erica, 2004, Marz 2015.
    10. STANOVICS, I., KUNDRAK, J. (2013). Theoretical Value of Total Height of Profile in Rotational Turning. Applied Mechanics and Materials, 2013, Vol. 309, pp. 154-161. Go to original source...
    11. STEPHENSON, D. A., AGAPIOU, J. R. (2005). Metal cutting theory and practice. London, New York. Taylor & Francis, 2005, 884 p., ISBN 0-8247-5888-9.
    12. TRENT, E. M., WRIGHT, P. K. (2000). Metal Cutting. Oxford. Butterwoth/Heinemann, 2000, 446 p., ISBN 0-7506-7069-X.
    13. VASILKO, K., MÁDL, J. (2012). Teorie obrábění, UJEP, Ústí nad Labem, 2012, 526 p., ISBN 978-80-7114-460-8
    14. VOJTKO, I., SIMKULET, V., KOČIŠKO, M., BARON, P. (2013). Investigation of carbon steel C45 after new turning method by master block depending on the time of acceleration amplitude of oscillation tool, World Academy of Science, Engineering and Technology, 2013, No. 78, pp. 657-659.

    Return to the content