Manufacturing Technology 2017, 17(4):611-617 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/4/611

Methodology of Increasing Safety of Welding Joints in Pressure Vessels X5CrNi18-10

Martina Vacková1, Martin Vaľko2, Slavko Pavlenko3, Jozef Haľko3
1 University of Security Management in Kosice, Kosťová 1, 040 01 Košice. Slovakia
2 Kaiser Eastern Europe s.r.o., Priemyselna 604/5, 922 02, Krakovany. Slovakia
3 Faculty of Manufacturing Technologies of the Technical University in Košice with seat in Prešov, Bayerova 1, 080 01 Prešov. Slovakia

The paper deals with welding joints and the methodology of increasing safety during austenitic chromium-nickel steels welding - type EN 10028-7 1.4301 (X5CrNi18-10). The technology of submerged arc steel welding 1.4301 using MAG enables a wider application of these steels in terms of the production of pressure vessels, but despite following all the safety regulations of heterogeneous welding stated in WHS, there might be an occurrence of melting defects of carbon parts through the welding of joints. The aim of this paper is to discuss the corrections of welding penetrations of the additional material during inhomogeneous welding, with the least possible destruction of the original material.

Keywords: welding, welding joints, austenitic chromium-nickel steels welding, safety during welding

Published: September 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vacková M, Vaľko M, Pavlenko S, Haľko J. Methodology of Increasing Safety of Welding Joints in Pressure Vessels X5CrNi18-10. Manufacturing Technology. 2017;17(4):611-617. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/4/611.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BERNASOVSKÝ, P., MALÍK, K. (1988). Odolnosť austenitických korózievzdorných ocelí proti likvidačnej praskavosti vo zváraní. Zváračské správy (VÚZ). (Resistance of austenitic corrosion resisting steels against liquidating cracking in welding. Welding reports). 1988. (in Slovak)
    2. Böhler welding. Filler Metals for joining Applications. Catalogue, 2014. [online] <https://www.google.sk/?gws_rd=ssl#q=B%C3%B6hler+welding.+Filler+Metals+for+joining+Applications.+>
    3. ČÍHAL, V. (1999). Korozivzdorné oceli a slitiny. (Stainless steels and alloys). Praha, Academia AV, 1999. 437 p. ISBN 80-200-0671-0 (in Czech)
    4. ČÍHAL, V. (1978). Mezikrystalová koroze ocelí a slitin. (Intergranular corrosion of steels and alloys). Praha. Nakladatelství technické literatury SNTL, 1978. 408 p. (in Czech)
    5. HRIVŇÁK, I. (2013). Zváranie a zvariteľnosť materiálov. (Welding and weldability of materials) Citadella, 2013, 496 p. ISBN: 9788089628186 (in Slovak)
    6. HRIVŇÁK, I. (2009). Zváranie a zvariteľnosť materiálov. (Welding and weldability of materials). Slovenská technická univerzita, 2009, p. 486. ISBN: 9788022731676 (in Slovak)
    7. PATEK,M., KONAR,R., SLADEK,A., RADEK, N. (2014). Non-destructive testing of split sleeve welds by the ultrasonic TOFD method. In: Manufacturing technology, vol. 14, No.3, pp. 403-407. J.E.Purkyne University, Ústi nad Labem. ISSN 1213-2489. Go to original source...
    8. KONAR,R., MICIAN,M. (2014). Non-destructive testing of welds in gas pipelines repairs with Phased Aray ultrasnoic technique. In: Manufacturing technology, vol. 14, No. 1, pp.42-47. J.E.Purkyne University, Ústi nad Labem. ISSN 1213-2489. Go to original source...
    9. VRZGULA, P., FATURIK, M. MICIAN, M. (2014). New inspection technologies for identification of failure in the matrial and welded joints for area gas industry. In: Manufacturing technology, Vol. 14, No. 3, pp.487-492. J.E.purkyne University, Ústi nad Labem, ISSN 1213-2489. Go to original source...

    Return to the content