Manufacturing Technology 2017, 17(6):906-912 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/6/906

The Effect of Changes to Nickel Coating Machine on Surface Integrity and Microstructure after Grinding

Martin Marek1, Martin Novák1, František Holešovský1, Numan M. Durakbasa2, Eva Maria Walcher2
1 Faculty of Mechanical Engineering, J. E. Purkyně University in Usti nad Labem, Pasteurova 3334/7, 400 01 Ústí nad Labem
2 Department for Interchangeable Manufacturing and Industrial Metrology and Nanometrology Laboratory, Institute for Production Engineering and Laser Technology. Vienna University of Technlogy. 1060 Wien, Getreidemarkt 9, BA 09/3113

Grinding is an overly used finishing technology, which can obtain very accurate surface integrity. The desirable surface quality after grinding is one of the most relevant parameters. In production, surface preparation such as chromium plating, nickel plating, etc. are more prevalent. These platings are used as protection against corrosion, erosion, abrasion and as a material for the renovation of worn parts. This paper discusses the change of nickel coating machines, which has an influence on surface integrity and microstructure after grinding. The team has built a completely unique and new technical solution for the covered equipment which had never been built in the past. The input parameters were selected based on past experience in the company, related to the area covered in this paper.

Keywords: nickel, grinding, surface integrity, microstructure

Published: December 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Marek M, Novák M, Holešovský F, Durakbasa NM, Walcher EM. The Effect of Changes to Nickel Coating Machine on Surface Integrity and Microstructure after Grinding. Manufacturing Technology. 2017;17(6):906-912. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/6/906.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MASLOV, J., N., Teorie broušení kovů. Praha: SNTL - Nakladatelství technické literatury, n. p., 1979. 244-248 s.
    2. MÁDL, J., KAFKA, J., VRABEC, M., DVOŘÁK, R. Technologie obrábění, 3. díl. Praha: ČVUT, 2000. 81 s.
    3. NOVÁK, M., HOLEŠOVSKÝ, F. Studium integrity broušeného povrchu [online]. [cit. 2014-2-28]. Dostupné z http://www.fvt.tuke.sk/journal/pdf08/2-str-11-13.pdf
    4. MÁDL, J., HOLEŠOVSKÝ, F.: Integrita obrobených povrchů z hlediska funkčních vlastností, Miroslav Sláma, 1. vyd. Ústí nad Labem: UJEP, FVTM Ústí nad Labem, 2008, 230 s., ISBN 978-80-7414-095-2.
    5. MALLORY, G. O. a J. B. HAJDU. Electroless Plating - Fundamentals and Applications. Orlando: William Andrew Publishing/Noyes, 1990, 575 s. ISBN 978-0815512776.
    6. MAREK, M., NOVAK, M. (2017). Process and Equipment Improvement for Nickel Brush Plating Application. In Manufacturing Technology, Vol. 17, No. 4, pp. 503-507. Go to original source...
    7. MARINESCU, Z., D., aj. (2007). Handbook of machining with grinding wheels. Boca Raton: CRC Press.2007. 592 s. ISBN 1-57444-671-1
    8. E. PENA-MUNOZ, Electrolytic and alectroless coatings of Ni-PTFE composites. For Surface and Coatings Technology. Volume 107 (1998), issues 2-3, pp. 85-93 Go to original source...
    9. M.R KALANTARY, K.A HOLBROOK, P.B WELLS, Trans. Instut. Metal Finishing, Volume 71 (1993), pp. 55 Go to original source...
    10. LATTNER R., HOLESOVSKY F., KAREL T., LATTNER M. (2015). Abrasive Machining of Ti6Al4V Alloy. In Manufacturing Technology, Vol. 15, No. 4, pp. 571 - 575. Go to original source...
    11. LATTNER, R., HOLESOVSKY, F., NOVAK, M., VRABEL, M. (2016). Grinding of titanium Alloy Ti6Al4V with Silicon Carbide Grinding Wheel. In Manufacturing Technology, Vol. 16, No. 1, pp. 159 - 162 Go to original source...
    12. NOVAK, M., NAPRSTKOVA, N., (2015). Grinding of the Alloy INCONEL 718 and Final Rougness of the Surface and Material Share. In Manufacturing Technology, Vol. 15, No. 6, pp. 1015 - 1023 Go to original source...
    13. NOVAK, M. (2011) Surface quality of hardened steels after grinding. In: Manufacturing Technology, Vol. 11, No. 11, pp. 55-59 Go to original source...

    Return to the content