Manufacturing Technology 2018, 18(4):597-599 | DOI: 10.21062/ujep/144.2018/a/1213-2489/MT/18/4/597

Microstructure Evaluation of Ductile Cast Iron and Numerical Modal Analysis

Petra Kováčiková, Ján Vavro, Ján Vavro jr., Andrej Dubec
Faculty of Industrial Technologies in Púchov, Alexander Dubček University of Trenčín. I. Krasku 491/30, 020 01 Púchov. Slovakia

This work is closely connected with the evaluation of the microstructure of the cast iron with the spherical shape of graphite. The given work is mainly focused on mechanical properties, chemical composition and microstructure, which are important to be known as an input parameters for computational modelling and numerical analysis. The external factors, influencing the measure of the mechanical damping, include the measure of the mechanical loading, loading frequency and temperature. These factors have the influence on the process of the mechanical energy distribution in materials. Eigenshapes as well as eifenfreguencies were investigated by modal analysis using finite element method (FEM).

Keywords: cast iron, microstructure, mechanical properties, modal analysis

Published: September 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kováčiková P, Vavro J, Vavro J, Dubec A. Microstructure Evaluation of Ductile Cast Iron and Numerical Modal Analysis. Manufacturing Technology. 2018;18(4):597-599. doi: 10.21062/ujep/144.2018/a/1213-2489/MT/18/4/597.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. ASTM International. (2004). Standart test method for measuring vibration-damping properties of materials. Code ASTM E 756-04
    2. BILO©OVÁ, ALENA. (2006). Experimental Modal Analysis. V©B - Technical University of Ostrava, p. 104. Ostrava
    3. EWINS, D.J. (1988). Modal testing: Theory and Practice. Gilliard, Great Yarmouth, p. 269. ISBN 0-86380-017-3.
    4. HANDRÍK M., JAKUBOVIČOVÁ L., KOPAS P., SÁGA M. (2010). Analysis of microplastic areas near graphite particles of nodular cast iron loading bellow yield stress, Metalurgija (Metalurgy), No. 2, Vol. 49, (2010), p. 263 - 267, ISSN0543-5846.
    5. NOVÝ, F., KOPAS, P., BOKUVKA, O., SAVIN, A. (2016). Fatigue Durability of Ductile Iron in Very-High-Cycle Region, Manufacturing Technology, No. 2, Vol. 16, (2016), ISSN 1213-2489, p 406-410. Go to original source...
    6. PU©KÁR, A. (1995). Internal damping of materials., EDIS, pp.382. ISBN 80-7100-260-7. ®ilina
    7. STANKOVIČOVÁ, Z., DEKÝ©, V., NOVÁK, P., SAPIETA M. (2015). Numerical Simulation of Thermoe lastic Stress Analysis, Manufacturing Technology, No 5, Vol. 15, (2015), ISSN 1213-2489, p. 925-930 Go to original source...
    8. STN 42 0461. (1977). Assessment of metallographic structure of castings., ÚNM, p 16. Praha
    9. VA©KO, A., BELAN, J., MARKOVIČOVÁ, L., TILLOVÁ, E. (2016). Microstructure and Fatigue Properties of Nodular Cast Iron at Low Frequency Cyclic Loading, Manufacturing Technology, No. 5, Vol. 16, (2016), p 1188-1193. Go to original source...
    10. VAVRO, J. (2013). Numerical analysis of voltage states of graphite cast iron structures. Issue I., p 76. ISBN 978-80-8075-614-7. ®ilina

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content