Manufacturing Technology 2021, 21(2):151-163 | DOI: 10.21062/mft.2021.035
Effects of tandem side-by-side GTAW welds on centerline solidification cracking of AA2024
- 1 Department of Manufacturing and Welding Engineering Technology, College of Technological Studies, PAAET, Shuwaikh 70654, Kuwait City, Kuwait
- 2 Department of Mechanical and Industrial Engineering, Concordia University, 1515 St. Catherine Street West, Montréal, Québec, Canada
Welding techniques such as gas tungsten arc welding (GTAW) can induce solidification cracking owing to the wide solidification temperature range. Riveting or mechanical fastening are plausible alternatives, but can create problems like material loss, overall weight increase, corrosion, and introduction of high stress concentration areas. This study proposes a new welding method to improve and minimize centerline solidification cracking in GTAW called “tandem side-by-side GTAW welds”. AA2024 is fusion welded using GTAW, and its solidification cracking behavior is investigated and compared for two weld pool motions (straight and weaving) and the proposed method. The fishbone test was used to assess centerline solidification cracking susceptibility. The results of welding AA2024 autogenously proved that the tandem weld pool motion is superior to the other two GTAW methods. As a result, the proposed method showed lower stress concentration areas by forming less concave weld shapes, lower heat input, formation of preferable grain size and orientation thus shorter centerline solidification crack lengths with a tortuous crack path motion obtained in comparison with the straight and weave.
Keywords: Tandem side-by-side; gas tungsten arc welding; centerline solidification cracking; AA2024; weld pool motion; crack path
Received: October 8, 2020; Revised: March 7, 2021; Accepted: March 16, 2021; Prepublished online: March 22, 2021; Published: April 6, 2021 Show citation
References
- GENG, S., PING J., LINGYU G., XUESONG G., GAOYANG M. (2020). Multi-scale simulation of grain/sub-grain structure evolution during solidification in laser welding of aluminum alloys. International Journal of Heat and Mass Transfer 149:119252. ISSN 0017-9310
Go to original source...
- KOU, S. (2003). Welding Metallurgy. 2nd Edition ed. INC., Publication, New Jersey: John Wiley & Sons. ISBN 0-471-43491-4
- CONIGLIO, N., CROSS, C. (2013). Initiation and growth mechanisms for weld solidification cracking. International materials reviews 58 (7):375-397. ISSN 0950-6608
Go to original source...
- WELLER, D., HAGENLOCHER, C., WEBER, R., GRAF, T. (2020). Influence of the solidification path of AlMgSi aluminium alloys on the critical strain rate during remote laser beam welding. Science and Technology of Welding and joining 25 (2):101-105. ISSN 1362-1718
Go to original source...
- BODAGHI, F., MOVAHEDI, M., KOKABI, A., TAVAKOLI, R. (2019). Effect of solid fraction, grain misorientation and grain boundary energy on solidification cracking in weld of Al-Cu aluminum alloys. Materials Research Express 6 (8):086598. ISSN 2053-1591
Go to original source...
- AGARWAL, G., KUMAR, A., RICHARDSON, I., HERMANS, M. (2019). Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels. Materials & De-sign 183:108104. ISSN 0264-1275
Go to original source...
- GHAINI, F., SHEIKHI, M., TORKAMANY, M., SABBAGHZADEH, J. (2009). The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy. Materials Science and Engineering: A 519 (1-2):167-171. ISSN 0921-5093
Go to original source...
- LIPPOLD, J. (2015). Welding metallurgy and weldability: Wiley Online Library. ISBN 1118230701
Go to original source...
- KOU, S. (2020). Welding Metallurgy. 3rd Edition ed: John Wiley & Sons. ISBN: 978-1-119-52481-6
- BIRADAR, N., RAMAN, R. (2012). Investigation of hot cracking behavior in transverse mechanically arc oscillated autogenous AA2014 T6 TIG welds. Metallurgical and Materials Transactions A 43 (9):3179-3191. ISSN 2053-1591
Go to original source...
- ALIZADEH-SH, M., MARASHI, S., RANJBARNODEH, E., SHOJA-RAZAVI, R., OLIVEIRA, J. (2020). Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate. Optics & Laser Technology 128:106244. ISSN 0030-3992
Go to original source...
- ZACHARIA, T. (1994). Dynamic stresses in weld metal hot cracking. Welding Journal Including Welding Research Supplement 73 (7):164-172. ISSN 0043-2296
- CROSS, C., TACK, W., LOECHEL, W., KRAMER, S. (1990). Aluminum weldability and hot tearing theory. Weldability of Materials:275-282.
- MSOMI, V., MBANA, N. (2020). Mechanical Properties of Friction Stir Welded AA1050-H14 and AA5083-H111 Joint: Sampling Aspect. Metals 10 (2):214.
Go to original source...
- SOYSAL, T., KOU, S. (2019). Effect of filler metals on solidification cracking susceptibility of Al alloys 2024 and 6061. Journal of Materials Processing Technology 266:421-428. ISSN 0924-0136
Go to original source...
- KHALILABAD, M., et, al. (2018). Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198-AA2024 FSWed joint. Journal of Manufacturing Processes 34:86-95. ISSN 1526-6125
Go to original source...
- LIU, J., KOU, S. (2017). Susceptibility of ternary aluminum alloys to cracking during solidification. Acta Materialia 125:513-523. ISSN 1359-6454
Go to original source...
- ÇAM, G., İPEKOĞLU, G. (2017). Recent developments in joining of aluminum alloys. The International Journal of Advanced Manufacturing Technology 91 (5-8):1851-1866. ISSN 1433-3015
Go to original source...
- PUMPHREY, W., JENNINGS, P. (1948). A consideration of the nature of brittleness at temperatures above the solidus in castings and welds in aluminium alloys. J. of the Inst. of Metals 75:235-256.
- KOU, S. (2003). Solidification and liquation cracking issues in welding. Jom 55 (6):37-42. ISSN 1543-1851
Go to original source...
- CROSS, C. (2005). On the origin of weld solidification cracking. In Hot cracking phenomena in welds, 3-18. Springer.
Go to original source...
- CONIGLIO, CROSS, C. (2020). Effect of weld travel speed on solidification cracking behavior. Part 1: weld metal characteristics. The International Journal of Advanced Manufacturing Technology 107 (11):5011-5023. doi: 10.1007/s00170-020-05231-y. ISSN 1433-3015
Go to original source...
- GRANGE, D., BARTOUT, D., MACQUAIRE, B., COLIN, C. (2020). Processing a non-weldable Nick-el-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking. Materialia:100686. ISSN 2589-1529
Go to original source...
- WANG, X., et al. (2014). Analysis of solidification cracking susceptibility in side-by-side dual-beam laser welding of aluminum alloys. The International Journal of Advanced Manufacturing Technology 73 (1-4):73-85. ISSN 0268-3768
Go to original source...
- ALBANNAI, A., ALORAIER, A., ALASKARI, A., ALAWADHI, M. (2019). Improving Centerline Solid-ification Crack Resistivity of AA 2024 Using Tandem Side-by-Side GTAW Technique. Materials Performance and Characterization 8 (4). ISSN 2379-1365
Go to original source...
- KOU, S, LE, Y. (1985). Grain structure and solidification cracking in oscillated arc welds of 5052 aluminium alloy. Metallurgical Transactions A 16 (7):1345-1352. ISSN 1543-1940
Go to original source...
- SOYSAL, T., KOU, S. (2018). A simple test for assessing solidification cracking susceptibility and check-ing validity of susceptibility prediction. Acta Materialia 143:181-197. ISSN 1359-6454
Go to original source...
- KONADU, D., PISTORIUS, P., TOIT, M. (2019). The influence of Ti and Nb on solidification cracking of ferritic stainless steels, as determined using self-restrained samples. Welding in the World 63 (5):1163-1172. ISSN 1878-6669
Go to original source...
- SHINOZAKI, K., et al. (2018). Arc characteristic evaluation of the double-electrode GTAW process using high current values. The International Journal of Advanced Manufacturing Technology 98 (1-4):929-936. ISSN 0288-4771
Go to original source...
- HAGENLOCHER, C., et al., Reduction of the hot cracking susceptibility of laser beam welds in AlMgSi alloys by increasing the number of grain boundaries. Science and Technology of Welding and joining, 2019. 24(4): p. 313-319.
Go to original source...
- AGARWAL, G., et al. (2018). Study of solidification cracking susceptibility during laser welding in an advanced high strength automotive steel. Metals 8 (9):673.
Go to original source...
- DAVIES, J., GARLAND, G. (1975). Solidification structures and properties of fusion welds. International metallurgical reviews 20 (1):83-108. ISSN 0367-9020
Go to original source...
- LAMPMAN, S. (1997). Weld integrity and performance: a source book adapted from ASM international handbooks, conference proceedings, and technical books: Asm International. ISBN 1615032045
Go to original source...
- LI, S., GAOYANG M., CHUNMING W. (2020). A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties. Journal of Manufacturing Processes 53:12-20. ISSN 1526-6125
Go to original source...
- RAGAVENDRAN, M., VASUDEVAN, M. (2020). Laser and hybrid laser welding of type 316L (N) austenitic stainless steel plates. Materials and Manufacturing Processes 35 (8):922-934. ISSN 1042-6914
Go to original source...
- KIM, C., KANG, M., KANG, N. (2013). Solidification crack and morphology for laser weave welding of Al 5J32 alloy. Science and Technology of Welding and joining 18 (1):57-61. ISSN 1362-1718
Go to original source...
- KOU, S., LE, Y. (1985). Alternating grain orientation and weld solidification cracking. Metallurgical Trans-actions A 16 (10):1887-1896. ISSN 0360-2133
Go to original source...
- AMAYA, T., YONEZAWA, T., OGAWA, K., PELTONEN, J., HÄNNINEN, H. (2018). Solidification Cracking Mechanism of Carbon Steel Weld Metal. Welding Journal 97 (2):55S-64S.
Go to original source...
- OHSHITA, S., YURIOKA, N., MORI, N., KIMURA, T. (1983). Prevention of solidification cracking in very low carbon steel welds. WELDING J. 62 (5):129.
- SAVAGE, F., LUNDIN, D. (1968). The Evaluation of the Weldability of Structural Alloys with the Varestraint Test. RENSSELAER POLYTECHNIC INST TROY NY WELDING LAB.
- KADOI, K., et al. (2013). The effect of welding conditions on solidification cracking susceptibility of type 310S stainless steel during laser welding using an in-situ observation technique. Welding in the World 57 (3):383-390. doi: 10.1007/s40194-013-0023-9. ISSN 1878-6669
Go to original source...
- AGARWAL, G. (2019). Study of solidification cracking during laser welding in advanced high strength steels: A combined experimental and numerical approach. Delft University of Technology.
Go to original source...
- TANG, Z., VOLLERTSEN, F. (2014). Influence of grain refinement on hot cracking in laser welding of aluminum. Welding in the World 58 (3):355-366. ISSN 1878-6669
Go to original source...
- KUMAR, H., SOMIREDDY, A., GURURAJ, K. (2012). A review on critical aspects of 316ln austenitic stainless steel weldability. Int. J. Mat. Sci. App 1:1.
Go to original source...
- SCHWEDERSKY, B., et al. (2018). Arc characteristic evaluation of the double-electrode GTAW process using high current values. The International Journal of Advanced Manufacturing Technology 98 (1-4):929-936. ISSN 1433-3015
Go to original source...
- GOODWIN, M. (1988). The effects of heat input and weld process on hot cracking in stainless steel. Welding Journal 67 (4):88-94.
- MIN, D., SHEN, J., LAI, S., CHEN, J. (2009). Effect of heat input on the microstructure and mechanical properties of tungsten inert gas arc butt-welded AZ61 magnesium alloy plates. Materials Characterization 60 (12):1583-1590. ISSN 1044-5803
Go to original source...
- NORMAN, F., DRAZHNER, V., PRANGNELL, B. (1999). Effect of welding parameters on the solidification microstructure of autogenous TIG welds in an Al-Cu-Mg-Mn alloy. Materials Science and Engineering: A 259 (1):53-64. ISSN 0921-5093
Go to original source...
- PLOSHIKHIN, V., PRIHODOVSKY, A., ILIN, A. (2011). Experimental investigation of the hot crack-ing mechanism in welds on the microscopic scale. Frontiers of Materials Science 5 (2):135. ISSN 2095-025X
Go to original source...
- REDDY, M., GOKHALE, A., RAO, P. (1997). Weld microstructure refinement in a 1441 grade aluminium-lithium alloy. Journal of Materials Science 32 (15):4117-4126. ISSN 1573-4803
Go to original source...
- Zhang, Y., et al. (2015). Reduced hot cracking susceptibility by controlling the fusion ratio in laser welding of dissimilar Al alloys joints. Journal of Materials Research 30 (7):993-1001. ISSN 0884-2914
Go to original source...
- Hu, J-F., et al. (2006). Numerical simulation on temperature and stress fields of welding with weaving. Science and Technology of Welding and joining 11 (3):358-365. ISSN 1362-1718
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.