Manufacturing Technology 2021, 21(3):405-412 | DOI: 10.21062/mft.2021.044

Modification of the Classical Theory of Metalworking

Karol Vasilko ORCID..., Zuzana Murčinková ORCID...
Technical University of Košice. Faculty of Manufacturing Technology, 080 01 Prešov, Bayerova 1, Slovakia

The paper derives mathematical and ggraphical relationships between technological parameters and result of metalworking, in the application of progresive cutting materials based on coated cutting tools of sintered carbide and cutting ceramits. The development of new cutting and machined materials leads to new perspectives on their interaction in the machining process. This process leads to patterns between cutting conditions and machined results. These need to be defined and used in favor of efficient machining of mechanical components in practice.

Keywords: machining, chip formation, tool durability, cutting forces, material machinability
Grants and funding:

Work was supported by the Slovak Research and Development Agency under the Contact No. APVV-18-031.

Received: January 18, 2021; Revised: April 8, 2021; Accepted: May 4, 2021; Prepublished online: May 17, 2021; Published: June 7, 2021  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K, Murčinková Z. Modification of the Classical Theory of Metalworking. Manufacturing Technology. 2021;21(3):405-412. doi: 10.21062/mft.2021.044.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BLAŠKOVIČ, P., BALLA, J., DZIMKO, M.: Tribológia. Bratislava: ALFA,1990, 360 s., ISBN 80-05-00633-0
    2. BOBROV, V.F., et all.: Razvitije nauki o rezanii metallov. Moskva: Mašinostrojenije, 1967, 414
    3. BUDA, J., BÉKÉS, J.: Teoretické základy obrábania kovov. Bratislava: ALFA, 1967, 698 s.
    4. DEGNER, W., LUTZE, H., SMEJKAL, E.: Spanende forming. VEB Berlin, 1989
    5. DLOUHÝ, M., HOUDEK, J., KOLOC, J.: Slinuté karbidy pro obrábění. Praha: SNTL, 1964, 313 s.
    6. DMOCHOVSKI, J.: Podstavy obróbki skrawaniem. Warszawa, 1978, 586 s.
    7. DUPLÁK, J.: Nové analytické vyjadrenie T-vc závislosti pre rozličné rezné materiály.Prešov FVT TUKE, Dizertačná práca, 2014
    8. GENSKÝ, R.: Metal Cutting Operations. Leipzig: Edition Leipzig, 1966, 191 s.
    9. GLEBOV, S, F: Teorija najvigodnejšego rezanija metallov. Gosmašmetizdat, 1933.
    10. GRANOVSKIJ, G. I., GRANOVSKIJ, V. G.: Rezanije metallov. Moskva: vyššaja škola 1985, 304 s.
    11. GRZESIK, W.: Podstawy skawania materialow metalowych. Warszawa: Wydawnictwa Naukowo-Techniczne, 1998, 380 s.,ISBN 83-204-2311-2
    12. HOLEŠOVSKÝ, F. et all.: Materiály a technologie obrábění. Ústí n. Labem, UJEP, 1991, 250 s.
    13. HOSHI, K., HOSHI, T.: On the metal cutting mechanism with the built-up edge. Mem.Fac. Engng. Hekkaide University 12, č.3, 1969
    14. KACZMAREK, J., WOJCIECHWICZ, B.: Zmjany w strategii badaň eksloatacyjnej warstwy wierzchniej. Tribologia č. 6, 1995, s. 629 - 654.
    15. KALPAKJIAN, S.: Manufacturing engineering and technology. New York: Addison Wesley Publishing Company, 1989, pp.1999, ISBN 0-201-12849-7
    16. KOVAČ, P., MILIČIČ D.: Rezanje metala. Novi Sad: Univerzitet u Novom Sadu, 240 s., ISBN 86.899-0015-1
    17. KUNDRÁK, J., PÁLMAi, Z.: The Change of Tool Life in a Wide Range of Cutting Speeds in Hard Turning. Manufacturing Technology, April 2019, Vol. 19, No. 2 Go to original source...
    18. LOLADZE, T. N.: Stružkoobrazovanije pri rezanii metallov. Moskva, Mašgiz, 1952
    19. MASUDA, K.: Compressive strenght of the cutting edges of the WC-Co cemented carbides. Bulletin ASME, 13, č. 56, 1970 Go to original source...
    20. NOVÁK, M., HIROSHI, K., OHMORI, H., Differences at the Surface Roughness by the ELID and Grinding Technology. Manufacturing Technology, 2013, vol. 13, No. 2 Go to original source...
    21. OPITZ, H., SCHILLING, W.: Untersuchung der Verschleiβreaktionen bei der Bearbeitung von Stahl mit Echnellarbeitsstahlwerkzeugen. Forschungsber Lande s Nordhein-Westfalen, 1967, Nr. 1796, 95 s. Go to original source...
    22. POLAČEK H, P, P., CHVOJKA, P., DROBÍLEK, J.: Dynamic Forces in Unstable Cutting during Turning Operation. Manufacturing Technology, March 2014, Vol. 14, No.1 Go to original source...
    23. PŘIKRYL, Z., MUSÍLKOVÁ, R.: Teorie obrábění. Praha: SNTL, 1982, 235 s.
    24. TAYLOR, F, W.: On the art of cutting metals. Transaction of the ASME, 28, November 1906, s. 31-279, 281-350 Go to original source...
    25. TIME, J. A.: Soprotivlenije metallov i dereva rezaniju. Petresburg 1870

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content