Manufacturing Technology 2021, 21(5):627-633 | DOI: 10.21062/mft.2021.072

Bonding Strength Analysis of Multi-material and Multi-color Specimens Printed with Multi-extrusion Printer

Gani Issayev ORCID..., Aidos Aitmaganbet (ORCID: 0000-0002-7439-305), Essam Shehab ORCID..., Md. Hazrat Ali ORCID...
Department of Mechanical and Aerospace Engineering, SEDS, Nazarbayev University, Nur-Sultan 010000, Kazakhstan

This paper highlights the findings of multi-material application in 3D printed specimens. The work presents experimental results of multi-material, and multi-color-based 3D printed specimens by a multi-extrusion printer developed at the laboratory. It aimed to determine the bonding properties between the layers of various materials indicated with different colors. The samples were printed across multiple infill models and tested in the tensile and compression machine. The specimens were created with 10%, 25%, and 100% infill having single and dual colors material. Polylactic Acid (PLA), Acrylonitrile Butadiene Styrene (ABS), and Flex materials were used for printing various specimens with various colors. The layers were printed synchronously. The filaments were changed according to the predetermined algorithm. The experimental results showed that the mechanical properties of single, dual, and triple mate-rial specimens differed according to the reinforcement strategy. In addition, the mechanical property of the same material with different colors was identical.

Keywords: 3D Printing, FDM, Dual-colors, Multi-layers, Infill
Grants and funding:

This work was supported by the Faculty Development Competitive Research Grants, Ref. No. 021220FD1551, Nazarbayev University.

Received: May 11, 2021; Revised: June 29, 2021; Accepted: July 2, 2021; Prepublished online: October 21, 2021; Published: November 25, 2021  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Issayev G, Aitmaganbet (ORCID: 0000-0002-7439-305) A, Shehab E, Ali H. Bonding Strength Analysis of Multi-material and Multi-color Specimens Printed with Multi-extrusion Printer. Manufacturing Technology. 2021;21(5):627-633. doi: 10.21062/mft.2021.072.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. S. Ford, M. Despeisse, Additive manufacturing and sustainability: an exploratory study of the advantages and challenges, J. Clean. Prod. 137 (2016) 1573-1587. Go to original source...
    2. J. Strnad, M. Reznicek, K. Jelinkova, V. Janostik, M. Ovsik, Possibilities of Creating a Mechanism on FDM 3D Printer, Manuf. Technol. J. 19(3) (2019) 508-512. Go to original source...
    3. S. Vyavahare, S. Teraiya, D. Panghal, S. Kumar, Fused deposition modelling: a review, Rapid Prototyp. J. 26(1) (2020) 176-201. Go to original source...
    4. S. Crump, Rapid prototyping using FDM, Mod. Cast. 82(4) (1992) 36-38.
    5. J.Y. Wong, A.C. Pfahnl, 3D printing of surgical instruments for long-duration space missions, Aviat. Space Environ. Med. 85(7) (2014) 758-763. Go to original source...
    6. J. Pernica J, Sustr M, Dostal P, Brabec M, Dobrocky D. Tensile Testing of 3D Printed Materials Made by Different Temperature. Manufacturing Technology. 2021;21(3):398-404. doi: 10.21062/mft.2021.039. Go to original source...
    7. M.K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R.I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja, Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, CIRP annals 65(2) (2016) 737-760. Go to original source...
    8. G.A.O. Adam, D. Zimmer, On design for additive manufacturing: evaluating geometrical limitations, Rapid Prototyp. J. 21(6) (2015) 662-670. Go to original source...
    9. E. Fodran, M. Koch, U. Menon, Mechanical and dimensional characteristics of fused deposition modeling build styles, 1996 International Solid Freeform Fabrication Symposium, 1996.
    10. D. Espalin, J. Alberto Ramirez, F. Medina, R. Wicker, Multi-material, multi-technology FDM: exploring build process variations, Rapid Prototyp. J. 20(3) (2014) 236-244. Go to original source...
    11. F. Roger, P. Krawczak, 3D-printing of thermoplastic structures by FDM using heterogeneous infill and multi-materials: An integrated design-advanced manufacturing approach for factories of the future, Congrès français de mécanique, AFM, Association Française de Mécanique, 2015.
    12. M.H. Ali, N. Mir-Nasiri, W.L. Ko, Multi-nozzle extrusion system for 3D printer and its control mechanism, Int. J. Adv. Manuf. Technol. 86(1) (2016) 999-1010. Go to original source...
    13. D. Baca, R. Ahmad, The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modeling, Int. J. Adv. Manuf. Technol. 106(9) (2020) 4509-4520. Go to original source...
    14. S. Khalil, J. Nam, W. Sun, Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds, Rapid Prototyp. J. 11(1) (2005) 9-17. Go to original source...
    15. Y. Yan, Z. Xiong, Y. Hu, S. Wang, R. Zhang, C. Zhang, Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition, Mater. Lett. 57(18) (2003) 2623-2628. Go to original source...
    16. E. Malone, H. Lipson, Multi-material freeform fabrication of active systems, Engineering Systems Design and Analysis, 2008, pp. 345-353. Go to original source...
    17. M.A. Jafari, W. Han, F. Mohammadi, A. Safari, S.C. Danforth, N. Langrana, A novel system for fused deposition of advanced multiple ceramics, Rapid Prototyp. J. 6(3) (2000) 161-175. Go to original source...
    18. K. Arcaute, L. Ochoa, B.K. Mann, R.B. Wicker, Stereolithography of PEG Hydrogel Multi-Lumen Nerve Regeneration Conduits, ASME 2005 International Mechanical Engineering Congress and Exposition, 2005, pp. 161-167. Go to original source...
    19. K. Arcaute, B.K. Mann, R.B. Wicker, Stereolithography of three-dimensional bioactive poly (ethylene glycol) constructs with encapsulated cells, Ann. Biomed. Eng. 34(9) (2006) 1429-1441. Go to original source...
    20. T.J. Coogan, D.O. Kazmer, Healing simulation for bond strength prediction of FDM, Rapid Prototyp. J. (2017). Go to original source...
    21. P.K. Gurrala, S.P. Regalla, Part strength evolution with bonding between filaments in fused deposition modelling: This paper studies how coalescence of filaments contributes to the strength of final FDM part, Virtual. Phys. Prototyp. 9(3) (2014) 141-149. Go to original source...
    22. A. Abilgaziyev, T. Kulzhan, N. Raissov, M.H. Ali, W.L.K. Match, N. Mir-Nasiri, Design and development of multi-nozzle extrusion system for 3D printer, 2015 International Conference on Informatics, Electronics & Vision (ICIEV), 2015, pp. 1-5. Go to original source...
    23. K. Van de Velde, P. Kiekens, Biopolymers: overview of several properties and consequences on their applications, Polym. Test. 21(4) (2002) 433-442. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content