Manufacturing Technology 2021, 21(6):781-787 | DOI: 10.21062/mft.2021.090
Study on scatter of surface integrity of bearing raceway grinding
- 1 School of mechanical and electrical engineering, Lanzhou Jiaotong University, Lanzhou, Gansu, P.R. China
- 2 State Key Laboratory for Manufacturing System Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi, P.R. China
Taking the discrete degree of bearing raceway grinding surface integrity as the research object, the orthogonal test based on the wheel speed, workpiece speed and grinding depth is designed. The residual stress, retained austenite, hardness, grinding modified layer thickness and roughness of the raceway after grinding test were measured, and the mean value and standard deviation of these indexes were calculated. The results show that the standard deviation of residual stress and roughness decreases with the increase of wheel speed, and the standard deviation of retained austenite, hardness and grinding modified layer thickness keeps stable. Finally, the optimal grinding parameters considering the scatter of surface integrity are selected.
Keywords: raceway grinding, surface integrity, orthogonal test, scatter, standard deviation
Received: December 29, 2020; Revised: December 3, 2021; Accepted: December 3, 2021; Prepublished online: December 21, 2021; Published: January 8, 2022 Show citation
References
- GUO Y, LI W, JAWAHIR I. (2009). Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: a state-of-art research review and analysis[J]. Machining Science and Technology, 13(4): 437-470.
Go to original source...
- YUAN Z-J, HU H-Z, KOBAYSHIi A. (1989). Surface integrity of grinding of bearing steel GCr15 with CBN wheels[J]. CIRP annals, 38(1): 553-556.
Go to original source...
- ABRAO A M, ASPINWALL D K. (1996). The surface integrity of turned and ground hardened bearing steel[J]. Wear, 196(1-2): 279-284.
Go to original source...
- KONIG W, BERKTOLD A, KOCH K-F. (1993). Turning versus grinding-a comparison of surface integrity aspects and attainable accuracies[J]. CIRP annals, 42(1): 39-43.
Go to original source...
- LIU C R, YANG X. (2001). The scatter of surface residual stresses produced by face-turning and grinding[J]. Machining science and technology, 5(1): 1-21.
Go to original source...
- GAO E-W. (2008). Experimental study and numerical analysis of surface residual stress dispersion in precision grinding [D]. Shanghai: School of mechanical and power engineering, Shanghai Jiaotong University
- ZHANG X-P, WANG H-P, LU G-H, et al. (2010). Experimental study on surface residual stress dispersion of bearing steel after sequential grinding [J]. Journal of mechanical engineering, (15): 89-94
Go to original source...
- DANA S, ANNA R, MIROSLAV N, JOZEF M, MIROSLAV J. (2019). The implementations of suitable cutting parameters by grinding of titanium VT9 with impact on surface integrity [J]. Manufacturing Technology, 19(5):855-859
Go to original source...
- MARTIN M, MARTIN N, KAREL ©. (2019). The tmpact of changes in inFeed rate on surface integrity after chrome plate grinding by silicon carbide[J]. Manufacturing Technology, 19(2):284-291
Go to original source...
- HARRIS T A. Rolling bearing analysis[M]. John Wiley and sons, 2001.
- GUO Y, SCHWACH D W. (2005). An experimental investigation of white layer on rolling contact fatigue using acoustic emission technique[J]. International journal of fatigue, 27(9): 1051-1061.
Go to original source...
- ALMEN J O, BLACK P H. (1963). Residual stresses and fatigue in metals[M]. McGraw-Hill
- SU Y-T, LIN M-H, LEE M-S. (1993). The effects of surface irregularities on roller bearing vibrations[J]. Journal of sound and vibration, 165(3): 455-466.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.