Manufacturing Technology 2021, 21(6):762-773 | DOI: 10.21062/mft.2021.097

Verification of the safety of storing a pair of pressure vessels

Vít Černohlávek ORCID...1, Jan Štěrba ORCID...1, Martin Svoboda ORCID...1, Tomáš Zdráhal ORCID...1, Marcin Suszyński ORCID...2, Milan Chalupa ORCID...3, Zdeněk Krobot ORCID...3
1 Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
2 Faculty of Mechanical Engineering, Poznan University of Technology, Poland
3 Faculty of Military Technology, University of Defence in Brno, Czech Republic

This article deals with the calculation of pressure vessels for beer maturation using analytical calcula-tion according to ČSN standards and with the help of commercial software PVESS. The article pre-sents commonly used procedures in the design of pressure vessels, resp. vessels for use in the brewing industry in the assembly of pressure vessels stacked on top of each other. The article describes the main parts of the brewery tanks, including the procedure for their design. The choice of materials used, the choice of basic dimensions of pressure vessels was determined in the work. The tank vessel is made of stainless steel 1.4301 or 1.4541. The advantages of this material in the brewing industry are also presented. From the given input parameters, a control calculation of the strength of pressure vessels was performed. The result of the work was the verification of the calculation, finding out the deviations of the measurements using mathematical software with a common calculation according to the valid standards for the calculation of pressure vessels.

Keywords: lager tank, storage, bottom, construction, pressure vessel, stainlees steel
Grants and funding:

The article was created with the contribution of SGS grant support – Jan Evangelista Purkyně University in Ústí nad Labem UJEP-SGS-2020-48-001-2.

Received: September 15, 2021; Revised: December 20, 2021; Accepted: December 26, 2021; Prepublished online: December 26, 2021; Published: January 8, 2022  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Černohlávek V, Štěrba J, Svoboda M, Zdráhal T, Suszyński M, Chalupa M, Krobot Z. Verification of the safety of storing a pair of pressure vessels. Manufacturing Technology. 2021;21(6):762-773. doi: 10.21062/mft.2021.097.
Download citation

References

  1. Hlaváček F., Lhotský A.: Pivovarství, SNTL, Praha 1972
  2. Chládeček L.: Pivovarnictví, Grada, Praha 2007
  3. ČSN EN 10028-7 Ploché výrobky z ocelí pro tlakové účely, 2017
  4. 1997 ČSN EN 286-1 Tlakové nádoby stabilní, platnost od 1999 do současnosti
  5. Směrnice 97/23/ES evropského parlamentu a rady z 29. května
  6. Babinský M., Pevnostní výpočty tlakových nádob, 1995
  7. Ciszak, O.; Juszkiewicz, J.; Suszyński, M. Programming of Industrial Robots Using the Recognition of Geometric Signs in Flexible Welding Process. Symmetry 2020, 12, 1429. https://doi.org/10.3390/sym12091429 Go to original source...
  8. Svoboda, M., Soukup, J.: Verification of Numeric Solution by Experiment for Examination Verti-cal Osci-llation of a Mechanical System. In: Manufacturing Technology, Vol. 13, No. 4 (2013) pp 559-563, ISSN: 1213-2489 Go to original source...
  9. Sapieta, M., Šulka, P., Svoboda, M.: Using a numerical model to verification of thermoelastic analysis of flat specimen, In: Manufacturing Technology, Vol. 18, No. 3 (2018) pp 482-486, ISSN: 1213-2489, DOI: 10.21062/ujep/125.2018/a/1213-2489/MT/18/3/482 Go to original source...
  10. Černohlávek, V., Svoboda, M., Štěrba, J., Chalupa, M., Sapieta, M.: Analytical and experimental solution of vibrations of a system of bound bodies. In: Manufacturing Technology. Vol. 20, No. 6 (2020) pp 699-707. ISSN: 1213-2489. DOI: 10.21062/mft.2020.116. Go to original source...
  11. Xin, Y.; Zhou, Z.; Li, M.; Zhuang, C. Analytical Solutions for Unsteady Groundwater Flow in an Un-con-fined Aquifer under Complex Boundary Conditions. Water 2020, 12, 75. https://doi.org/10.3390/w12010075 Go to original source...
  12. Štěrba J, Černohlávková V, Soukup J. Automation of Filling Cryogenic Vessels with Perlite. Manufactur-ing Technology. 2015;15(5):941-944. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/5/941. Go to original source...
  13. Svoboda, A.; Chalupa, M.; Šrámková, T. Mechanical Medical Device for Generating Vibration and Stimulation of the Neuron Pathways. Symmetry 2021, 13, 62. https://doi.org/10.3390/sym13010062 Go to original source...
  14. Szybiński, B.; Romanowicz, P. J. Optimization of Flat Ends in Pressure Vessels. Materials 2019, 12, 4194. https://doi.org/10.3390/ma12244194 Go to original source...
  15. Choi, J.; Ahn, J.H.; Kim, H.Y. Modeling the Dynamic Behavior of a Pilot-Operated Solenoid Valve for an Ultra-High Pressure Vessel. Appl. Sci. 2021, 11, 2329. https://doi.org/10.3390/app11052329 Go to original source...
  16. Agresta, A.; Cavalagli, N.; Biscarini, C.; Ubertini, F. Effect of Bottom Geometry on the Natural Sloshing Motion of Water inside Tanks: An Experimental Analysis. Appl. Sci. 2021, 11, 605. https://doi.org/10.3390/app11020605 Go to original source...
  17. Haladuick, S.; Dann, M. R. Genetic Algorithm for Inspection and Maintenance Planning of Deteriorat-ing Structural Systems: Application to Pressure Vessels. Infrastructures 2018, 3, 32. https://doi.org/10.3390/infrastructures3030032 Go to original source...
  18. Křupka V., Schneider P., Stavba chemických zařízení I, PC-DIR, Brno 1994
  19. Khalifa, M.; Youssef, M.A.; Alhadid, M.M.A. Heat of Hydration Stresses in Stainless-Steel-Reinforced-Concrete Sections. Sustainability 2020, 12, 4852. https://doi.org/10.3390/su12124852 Go to original source...
  20. Bourne, J. C. E. A Catechism of the Steam Engine. [s. l.] : Project Gutenberg, 2004
  21. T-Consult, Tlaková zařízení - pevnostní výpočty, Brno 2008.

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.