Manufacturing Technology 2022, 22(4):444-450 | DOI: 10.21062/mft.2022.051

Properties of Aluminium Cellular Materials Produced by Powder Metallurgy Using the Foaming Agent TiH2

Iva Nová ORCID...1, Karel Fraňa ORCID...2, Pavel Solfronk ORCID...1, David Koreček ORCID...1, Jiří Sobotka ORCID...1
1 Technical University of Liberec, Faculty of Mechanical Engineering, Department Engineering Technology. Studentská1402/2, Czech Republic
2 Technical University of Liberec, Faculty of Mechanical Engineering, Department of Power Engineering Equipment. Studentská1402/2, Czech Republic

A considerable attention is paid to the production and monitoring of the properties of metallic cellular structures and the properties of aluminium foams, respectivly. Foam structures can be manufactured in three basic ways (by blowing the external gas into the melt, by melt gasification due to the thermal decomposition of the foaming agent, by the melting of the foamable preform which contains foaming agent particles). The paper addresses to our publication [18] and furthermore focuses on the investigation of mechanical properties of two types of foamed AlSi12 aluminium alloy samples. Samples (150x25x10 mm) were produced by powder metallurgy using a foaming agent TiH2. The characteristics features of the produced foam structures (relative density, porosity, volume fraction of solids, Young's modulus of elasticity) were studied on AlSi12 alloy samples. In addition, the porosity of samples and continuity of their air cells were monitored usign the scanning electron microscope.

Keywords: Aluminium alloy foam, Powder metallurgy, Foaming agent, Physical properties, Structure
Grants and funding:

The work has been financially supported by the project “Hybrid materials for hierarchical structures”, research goal: Composite materials and structures, research program: Materials and structures on the metal basis, reg. no. CZ.02.1./0.0/0.0/16_019/0000843 provided by the European Union and the Czech government

Received: February 8, 2022; Revised: September 9, 2022; Accepted: September 12, 2022; Prepublished online: October 6, 2022; Published: October 17, 2022  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Nová I, Fraňa K, Solfronk P, Koreček D, Sobotka J. Properties of Aluminium Cellular Materials Produced by Powder Metallurgy Using the Foaming Agent TiH2. Manufacturing Technology. 2022;22(4):444-450. doi: 10.21062/mft.2022.051.
Download citation

References

  1. De MELLER, A.A. (1925). Produit métallique pour lótention dóbjetc laminés moulés ou autres, et procédés pour sa fabrication. French patent 615, 147.
  2. ASHBY, M.F. et all. (2000). Metal Foams: A Design Guide. Ed. Betterwort-Heinemann.
  3. GIBSON, L.J. and M. F. ASHBY. (1997) Cellular Solids: Structure and properties, 2 nd Ed., Cambridge University Press, Cambridge. [4] BANHART, J. (2013) Light - Metal Foams History of Innovation and Technological Challenges. Advanced Engineering Materials, No 3, p. 82-111. Go to original source...
  4. BANHART, J. (2013). Light - Metal Foams History of Innovation and Technological Challenges. Advanced Engineering Materials, No 3, p. 82-111. Go to original source...
  5. ORT, M. (2008). The Utilization of metal foam in automotive industry parts. [Diploma thesis]. TU of Liberec.
  6. Promotional materials, (2008). Company (LKR) - Leichtmetall-Kompetenzzentrum Ranshofen GmbH, Austria (accesed on 15 March).
  7. KRETZ, R. (2003). PM Schaumaluminium, Legierungen Mechanische Eigenschaften, (Powder metalurgy, Aluminium Foaming, Alloying, Mechanical Properties), LKR, Ranshofen, Austria.
  8. MATIJASEVIC, B. FIECHTER, S. ZIZAK, I. GÖRKE, O. WANDERKA, N. SCHUBERT- BISCHOFF, P. and J. BANHART. (2004). Decomposition Behaviour of as-Received and Oxidized TiH2 Powder. In Conference proceedings Helmholtz Berlin, pp. 149-154.
  9. WANG, Ch. Yanan ZHANG, Y. Sufen XIAO, S. and Y. CHEN. (2017). Sintering Desification of Titanium hydride Powders. Materials and Manufacturing Processes 32 (5), pp. 517-522. Go to original source...
  10. RASOOLI A., SHAHVERDI H.R., DIVANDARI M., BOUTORABI M.A. (2008). Study of Thermal Decomposition Kinetic of Titanium Hydride Powder (TiH2) at High Temperatures. Journal of Technical - Engineering. Vol. 2, Number 1, pp. 1-12.
  11. BAUMGÄRTNER, F. DUARTE I. and J. Banhart. (2000). Industrialization of Powder Compact Foaming Process. Advanced Engineering Materials. 2, No.4, pp. 168-174. Go to original source...
  12. KENNEDY, A.R. (2002). The effect of TiH2 heat treatment on gas release and foaming in Al -TiH2 preforms. Scripta Mareralia, Vol. 47, Issues 11, 2 December pp. 763 - 767. Go to original source...
  13. JERZ, J. (1995). Foamed Aluminium and Aluminium Alloys Prepared by Powder Metallurgy, Ph. Thesis, TU Vienna,
  14. MORENO, F.G. (2016). Commercional Application of metal Foams: Their properties and production. Materials, 9. 85, pp. 1 - 27. Go to original source...
  15. MICHNA, ©., HREN, I., SVODODOVÁ, J. (2019). The Research oft he Effect of High Fe Content on AlSi9NiCuMg0.5 Alloy. Manufacturing Technology. Vol. 19, No.1. pp. 107-113. ISSN 1213-2489. Go to original source...
  16. NOVÁ, I., FRAŇA, K., SOBOTKA, J. SOLFRONK, P., KOREČEK, D. and I. NOVÁKOVÁ. (2019). Manufacturing Technology. Vol. 19, No.4. pp. 655-659. ISSN 1213-2489. Go to original source...
  17. RASOOLI, BOUTORABI, M.A. DIVANDARI, M. and A. AZARNIY. (2013). Effect of high heating rate on thermal decomposition behaviour of titanium hydride (TiH2) powder in air. Bulletin of Materials Science Vol. 36, No. 2, pp. 301-309. Go to original source...
  18. NOVÁ, I., FRAŇA, K., and T. LIPINSKI. (2021). Monitoring of the Interaction of Aluminum Alloy and Sodium Chloride as the Basis for Ecological Production of Expanded Aluminum. Physics of Metals and Metallography. PleiadesPublishing. Ltd. ISSN 0031-918X. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.