Manufacturing Technology 2022, 22(4):471-476 | DOI: 10.21062/mft.2022.059

Phase and Mechanical Properties Response of the Mechanically Alloyed CoCrFeNiAlX High Entropy Alloys

Angelina Strakosova ORCID..., Petr Kratochvíl ORCID..., Jan Riedl ORCID..., Filip Průša ORCID...
Department of Metals and Corrosion Engineering, University of Chemistry and Technology Prague. Technická 5, 166 28 Prague 6. Czech Republic

The present work describes the influence of Al content on the CoCrFeNiAl high-entropy alloys pre-pared by the powder metallurgy technique. The preparation procedure consisted of mechanical alloy-ing and subsequent spark plasma sintering. The content of Al varied from 10 – 30 at.% which affected the microstructure and mechanical properties. Using scanning electron microscope (SEM) and X-ray diffraction analysis (XRD) was found the microstructure becomes more refined with increasing con-tent of Al accompanied by the annihilation of the ductile FCC solid solution (Cr0.25Fe0.25Co0.25Ni0.25) phase and growth of the brittle and hard BCC solid solution phase (α-Fe) and formation of Al(Co0.5Ni0.5) phases, improving the mechanical properties. The best combination of the porosity, hardness HV 30, and ultimate compressive strength (UCS) was achieved for the studied high-entropy alloy when it contained 20 at. % Al.

Keywords: High-Entropy Alloy, Mechanical Alloying, Spark Plasma Sintering, Mechanical Properties, Microstructure
Grants and funding:

The research was financially supported by Czech Science Foundation (grant No. 21-11313S)

Received: July 14, 2022; Revised: October 4, 2022; Accepted: October 5, 2022; Prepublished online: October 6, 2022; Published: October 17, 2022  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Strakosova A, Kratochvíl P, Riedl J, Průša F. Phase and Mechanical Properties Response of the Mechanically Alloyed CoCrFeNiAlX High Entropy Alloys. Manufacturing Technology. 2022;22(4):471-476. doi: 10.21062/mft.2022.059.
Download citation

References

  1. YEH, J.W., et al. (2004). Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Advanced Engineering Materials. Vol. 6, No. 5, pp. 299-303. Go to original source...
  2. CANTOR, B., et al. (2004). Microstructural development in equiatomic multicomponent alloys. Materials Science and Engineering: A. 375-377: pp. 213-218. Go to original source...
  3. GUO, S. (2015). Phase selection rules for cast high entropy alloys: an overview. Materials Science and Technology. Vol.31, No.10, pp. 1223-1230. Go to original source...
  4. VESELKA Z., PRŮŠA, F., ŠENKOVÁ, A., VOJTĚCH, D. (2020). Slitiny s vysokou entropií - historie, příprava, vlastnosti a výzkum. Chemické listy, p. 114.
  5. ZHANG, Y., et al. (2014). Microstructures and properties of high-entropy alloys. Progress in Materials Science. 61, pp. 1-93. Go to original source...
  6. GAO, M.C., et al. (2016). High-Entropy Alloys: Fundamentals and Applications: Fundamentals and Applications. Cham, SWITZERLAND: Springer International Publishing AG.
  7. YANG, X., CHEN, S.Y., COTTON, J.D., et al. (2014). Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium. JOM. 66, pp. 2009-2020. Go to original source...
  8. VAIDYA, M., MURALIKRISHNA, G.M., and MURTY, B.S. (2019). High-entropy alloys by mechanical alloying: A review. Journal of Materials Research. Vol. 34, No. 5, pp. 664-686. Go to original source...
  9. PINC, J., ŠKOLÁKOVÁ, A., VEŘTÁT, P., ČAPEK, J., ŽOFKOVÁ, Z., RIESZOVÁ, L., HABR, S. & VOJTĚCH, D. 2020. Microstructural characterization and optimization of the ZnMg0.8(CaO)0.26 alloy processed by ball milling and subsequent extrusion. Manufacturing Technology, 20, 484-91. Go to original source...
  10. TORRALBA, J.M., ALVAREDO, P., and GARCÍA-JUNCEDA, A. (2019). High-entropy alloys fabricated via powder metallurgy. A critical review. Powder Metallurgy. Vol. 62, No. 2, pp. 84-114. Go to original source...
  11. WANG, W.-R., WANG, W.-L., WANG, S.-C., TSAI, Y.-C., LAI, C.-H., & YEH, J.-W. (2012). Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys. Intermetallics. 26, pp, 44-51. Go to original source...
  12. YANG, T., XIA, S., LIU, S., WANG, C., LIU, S., ZHANG, Y., WANG, Y. (2015). Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy. Materials Science and Engineering: A. 648, pp. 15-22. Go to original source...
  13. CAO, T., SHANG, J., ZHAO, J., CHENG, C., WANG, R., & WANG, H. (2016). The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys. Materials Letters. 164, pp. 344-347. Go to original source...
  14. KAO, Y.F., CHEN, S.K., CHEN, T.J., CHU, P.C., YEH, J.W., & LIN, S.J. (2011). Electrical, magnetic, and Hall properties of AlxCoCrFeNi high-entropy alloys. Journal of Alloys and Compounds. Vol. 509, No. 5, pp. 1607-1614. Go to original source...
  15. WANG, W.R., WANG, W.L., & YEH, J.W. (2014). Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures. Journal of Alloys and Compounds. 589, pp. 143-152. Go to original source...
  16. SHI, Y., COLLINS, L., FENG, R., ZHANG, C., BALKE, N., LIAW, P. K., & YANG, B. (2018). Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance. Corrosion Science. 133, pp. 120-131. Go to original source...
  17. GARLAPATI, M.M., et al. (2020). Influence of Al content on thermal stability of nanocrystalline AlxCoCrFeNi high entropy alloys at low and intermediate temperatures. Advanced Powder Technology. Vol. 31, No. 5, pp. 1985-1993. Go to original source...
  18. GANGULY, A., MURTHY, V., & KANNOORPATTI, K. (2020). Structural and electronic properties of chromium carbides and Fe-substituted chromium carbides. Materials Research Express. Vol. 7, No. 5. Go to original source...
  19. SUN, L., JI, X., ZHAO, L., ZHAI, W., XU, L., DONG, H., LIU, Y., PENG, J. (2022). First Principles Investigation of Binary Chromium Carbides Cr7C3, Cr3C2 and Cr23C6: Electronic Structures, Mechanical Properties and Thermodynamic Properties under Pressure. Materials. Vol. 15, No. 2, p. 558. Go to original source...
  20. THÜRLOVÁ, H. & PRŮŠA, F. 2022. Partial Substitution of Mn by Al in the Cocrfenimnxal20-X (X=5, 10, 15) High Entropy Alloy Prepared of Mechanical Alloying and Spark Plasma Sintering. Manufacturing Technology, 22, 342-6. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.