Manufacturing Technology 2022, 22(5):542-549 | DOI: 10.21062/mft.2022.062

Study of Light Transmission and Noise Attenuation Properties of Light Active Glass Materials

Pavel Hrbáček ORCID..., Martin Vašina ORCID...
Faculty of Technology, Tomas Bata University in Zlin, Vavrečkova 275, 760 01 Zlin

Lighting and noise belong to important environmental factors that have an influence on human psyche, concentration, labour protection, sleep quality and so on. This paper is focused on study of light transmission and noise attenuation properties of light active glass materials, which are applied as window and door panels in residential buildings. The light transmission through tested materials was evaluated by means of the transmission coefficient from the illuminance ratio method. The material ability to dampen noise was determined based on the sound pressure level attenuation during sound propagation through the light active glass materials. Different factors, which have an influence on the propagation of light and noise through the investigated glass materials, were evaluated in this work. Finally, the effect of the light transmission through the tested light active glass materials on the daylight quality in a living room was mathematically simulated using Wdls 5.0 software.

Keywords: Light Active Glass Material, Light Transmission, Noise Attenuation, Sound Pressure Level, Wdls 5.0 Software

Received: March 18, 2022; Revised: October 6, 2022; Accepted: December 2, 2022; Prepublished online: December 6, 2022; Published: December 11, 2022  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Hrbáček P, Vašina M. Study of Light Transmission and Noise Attenuation Properties of Light Active Glass Materials. Manufacturing Technology. 2022;22(5):542-549. doi: 10.21062/mft.2022.062.
Download citation

References

  1. KATUNSKY, D., DOLNIKOVA, E., DOROUDIANI, S. (2017). Integrated Lighting Efficiency Analysis in Large Industrial Buildings to Enhance Indoor Environmental Quality. In: Buildings, Vol. 7, No. 2, 47. MDPI. Basel. Switzerland. ISSN: 2075-5309. Go to original source...
  2. ABOAGYE, S. (2019). Is Energy Consumption Responsible for Environmental Degradation in Ghana? In: Journal of Applied Economics and Business Research, Vol. 9, No. 1, pp. 38 - 50. Journal of Applied Econom-ics and Business Research, Burnaby. Canada. ISSN 1927-033X.
  3. GARRE-OLMO, J., LOPES-POUSA, S., TURON-ESTRADA, A., JUVINIA, D., BALLESTER, D., VILALTA-FRANCH, J. (2012). Environmental Determinants of Quality of Life in Nursing Home Resi-dents with Severe Dementia. In: Journal of the American Geriatrics Society, Vol. 60, No. 7, pp. 1230 - 1236. Wiley. New Jersey. USA. ISSN: 0002-8614. Go to original source...
  4. HUANG, L., ZHU, Y.X., OUYANG, Q., CAO, B. (2012). A study on the effects on the thermal, luminous, and acoustic environments on indoor environmental comfort in offices. In: Building and Environment, Vol. 49, pp. 304 - 309. Elsevier, Oxford. England. ISSN 0360-1323. Go to original source...
  5. HOLMBERG, O., MALONE, J., REHANI, M., McLEAN, D., CZARWINSKI, R. (2010). Current is-sues and actions in radiation protection of patients. In: European Journal of Radiology, Vol. 76, No. 1, pp. 15 - 19. Elsevier, Clare. Ireland. ISSN 0720-048X. Go to original source...
  6. MUZET, A. (2007). Environmental noise, sleep and health. In: Sleep Medicine Reviews, Vol. 11, No. 2, pp. 135 - 142. Elsevier. ISSN 1087-0792. Go to original source...
  7. SEIDMAN, M.D., STANDRING, R.T. (2010). Noise and Quality of Life. In: International Journal of Environmental Research and Public Health, Vol. 7, No. 10, pp. 3730 - 3738. MDPI. Basel. Switzerland. ISSN: 1660-4601. Go to original source...
  8. CHANG, Z., HU, L. (2021). Study on Scatter of Surface Integrity of Bearing Raceway Grinding. In: Manufacturing Technology, Vol. 21, No. 6, pp. 781 - 787. Jan Evangelista Purkyně University in Ústí nad La-bem. Ústí nad Labem. Czech Republic. ISSN 1213-2489. Go to original source...
  9. HESSLING, M., SPELLERBERG, B., HOENES, K. (2017). Photoinactivation of bacteria by endogenous photosensitizers and exposure to visible light of different wavelengths - a review on existing data. In: FEMS Microbiology Letters, Vol. 364, No. 2, fnw270. Oxford Univ Press, Oxford. England. ISSN 0378-1097. Go to original source...
  10. WU, M.Y., YU, S.H., HE, L., YANG, L., ZHANG, W.F. (2017). High quality transparent conductive Ag-based barium stannate multilayer flexible thin films. In: Scientific Reports, Vol. 7, 103. Nature Publishing Group, London. England. ISSN 2045-2322. Go to original source...
  11. PRADO, R.T.A., FERREIRA, F.L. (2005). Measurement of albedo and analysis of its influence the surface temperature of building roof materials. In: Energy and Buildings, Vol. 37, No. 4, pp. 295 - 300. Else-vier, Lausanne. Switzerland. ISSN 0378-7788. Go to original source...
  12. TILLEY, R.J.D. (2011). Colour and the Optical Properties of Materials: An Exploration of the Relationship between the Light, the Optical Properties of Materials and Colour, p. 852. 2nd edition. Wiley. Chichester. England. ISBN 978-0470746967. Go to original source...
  13. https://balko.com.ua/steklopaket/
  14. POPOVIČ, Š. (2009). Výroba a zpracování plochého skla, p. 256. Grada Publishing. Prague. ISBN 978-80-247-3154-4.
  15. SPRAQUE, M.W., LUCZKOVICH, J. J. (2004). Measurement of an individual silver perch Bairdiella chrysoura sound pressure level in a field recording. In: The Journal of the Acoustic Society of America, Vol. 116, No. 5, pp. 3186 - 3191. Acoustic Society of America, New York, USA. ISSN 0001-4966. Go to original source...
  16. SVEC, J.G., GRANQVIST, S. (2004). Tutorial and Guidelines on Measurement of Sound Pressure Level in Speech. In: Journal of Speech Language and Hearing Research, Vol. 61, No. 3, pp. 441 - 461. American Speech-Language-Hearing Association, Rockville, USA. ISSN 1092-4388. Go to original source...
  17. KLIMENDA, F., SOUKUP, J., STERBA, J. (2019). Noise and vibration analysis of conveyor belt. In: Manufacturing Technology, Vol. 19, No. 4, pp. 604 - 608. Jan Evangelista Purkyně University in Ústí nad La-bem. Ústí nad Labem. Czech Republic. ISSN 1213-2489. Go to original source...
  18. KOLARIKOVA, M., KOLAŘÍK, L., PANÁČEK, T., KRÁLÍČEK, T., KUČERA, M., GURČÍK, T. (2020). Influence of Cutting Parameters and Plasma Cutting Mode on Cutting Quality and Process Noise. In: Manufacturing Technology, Vol. 20, No. 6, pp. 771 - 776. Jan Evangelista Purkyně University in Ústí nad Labem. Ústí nad Labem. Czech Republic. ISSN 1213-2489. Go to original source...
  19. WIERSMA, D.S., BARTOLINI, P., LAGENDIJK, A., RIGHINI, R. (1997). Localization of light in a disordered medium. In: Nature, Vol. 390, No. 6661, pp. 671 - 673. Macmillan Magazines Ltd., London, England. ISSN 0028-0836. Go to original source...
  20. ČSN 36 0011-2, Lighting measurement in areas - Part 2: Measurement of daylighting. Prague, UNMZ, 2006.
  21. REINHART, C.F., HERKEL, S. (2000). The simulation of annual daylight illuminance distribution - a state-of-the-art comparison of six RADIANCE-based methods. In: Energy and Buildings, Vol. 32, No. 2, pp. 167 - 187. Elsevier, Lausanne. Switzerland. ISSN 0378-7788. Go to original source...
  22. KATUNSKY, D., DOLNIKOVA, E., VERTAL, M, ZOZULAK, M. (2017). Influence of Roof Win-dows Area Changes on the Classroom Indoor Climate in the Attic Space: A Case Study. In: Sustainability, Vol. 12, No. 12, 5046. MDPI. Basel. Switzerland. ISSN 2075-5309. Go to original source...
  23. ČSN 73 0580-1, Daylighting in buildings - Part 1: Basic requirements. Prague, UNMZ, 2007.
  24. PENA-GARCIA, A., GIL-MARTIN, L.M., HERNANDEZ-MONTES, E. (2016). Use of sunlight in road tunnels: An approach to the improvement of light-pipes´ efficacy through heliostats. In: Tunnelling and Underground Space Technology, Vol. 60, pp. 135 - 140. Elsevier, Oxford. England. ISSN 0886-7798. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.