Manufacturing Technology 2022, 22(6):754-763 | DOI: 10.21062/mft.2022.089

Modern Technical Solutions for Cleaning, Disinfection and Sterilization

Antonín Svoboda ORCID...1, Milan Chalupa ORCID...2, Josef Jelínek ORCID...2
1 Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
2 University of Defence Brno, Kounicova 156/65, 662 10 Brno Czech Republic

Abstract: The article describes a new technical solution for ensuring efficient and inexpensive cleaning, disinfection and sterilization of production facilities and their equipment, based on the principle of gen-erating the use of ozone gas. It describes the technical solution and construction of sterilization and cleaning equipment with ozone gas and the sterilization of small objects, especially textiles contaminat-ed with various viruses, including the Covid-19 virus. The device is designed as energy-saving, structur-ally simple, with high sterilization and cleaning efficiency. The sterilization device is small in size, mo-bile and its design enables transportation in the trunk of an ordinary passenger car. The weight of the device is 14 kg. The device's ozone source is an ozone air purifier, mass-produced according to valid EU standards. The power source of the ozone purifier is an electrical source with a voltage of only 230 V and a frequency of 50 Hz. Alternatively, it is possible to use power from a safe mobile source or inverter. The operation of sterilization and cleaning device in a closed, non-ventilated area, does not endanger peo-ple's health or damage plants. The description of the construction of a technical sterilization device is focused on a specific type of device, but the stated theoretical results can be equally well used in the electrotechnical, food, medical or pharmaceutical industries and in general wherever there is a need to effectively and efficiently clean and sterilize production objects, their equipment, used materials and all other production aids means and tools.

Keywords: Sterilization of manufacturing equipment, Energy saving, COVID-19, Ozone cleaning, Ozone disinfection, Ozone generator, Mobile devices

Received: September 17, 2022; Revised: December 2, 2022; Accepted: December 23, 2022; Prepublished online: December 23, 2022; Published: January 6, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Svoboda A, Chalupa M, Jelínek J. Modern Technical Solutions for Cleaning, Disinfection and Sterilization. Manufacturing Technology. 2022;22(6):754-763. doi: 10.21062/mft.2022.089.
Download citation

References

  1. ACHRER, J., ETTLER, K., HLAVÁČEK, J., HRDÝ, R., JANOUCH, M., LEDVINOVÁ, J., PETRÁK, J., PETRÁK, M., PLACHÝ, J., SKŘIVÁNKOVÁ, P., STEJSKAL, V., VANÍČEK, K.: Ochrana ozonové vrstvy v České republice - Ministerstvo životního prostředí, ISBN: 978-80-7212-471-8
  2. ONLINE AVAILABLE FROM: https://www.chironex.cz/co-je-to-ozon/
  3. ONLINE AVAILABLE FROM: https://www.nanospace.cz/generatory-ozonu/
  4. ONLINE AVAILABLE FROM: https://www.ozonove-generatory.cz/
  5. NOŽIČKA, J. (1967): Analogové metody v proudění - Praha: Academia
  6. JIRKOVSKÝ, L., MURIEL, A.: Modified Navier Stokes equation and wall turbulence - Studia oecologi-ca Roč. 4, č. 2 (2010), s. 69-75
  7. ELAINE, S. ORAN, JAY, P. BORIS: Numerical simulation of reactive flow - Cambridge, Cambridge University Press, 2001
  8. DEJČ, M. E.: Technická dynamika plynů - Praha: SNTL, 1967
  9. KRAJČOVÁ, N.: Ozon v textilní technologii - diploma thesis Technical University of Liberec - Faculty of Textiles, Liberec 2013
  10. KREJSKOVÁ, E.: Studium rozkladu ozónu na pevných površích - bachelor's thesis Brno University of Technology, Faculty of Chemistry, Brno 2010
  11. KREJSKOVÁ, E.: Vliv teploty na generaci a rozklad ozónu na pevných površích - diploma thesis, Uni-versity of Technology in Brno, Faculty of Chemistry, Brno 2012
  12. FENDRYCH, A.: Samovolný rozpad ozónu rozpuštěného ve vodě - bachelor's thesis at the University of Technology in Brno, Faculty of Chemistry, Brno 2008
  13. NAVRÁTIL, P.: Využití aktivního uhlí v procesu čištění spalin - bachelor's thesis at the University of Technology in Brno, Faculty of Mechanical Engineering, Brno 2013
  14. ONLINE AVAILABLE FROM: https://eshop.micronix.cz/merici-technika/neelektricke-veliciny/plyny-a-prostredi/analyzatory-plynu/trotec-oz-one.html
  15. SAPIETA, M., SVOBODA, M.: Strength Computation of Bearing Test Station, Manufacturing Technology Journal, 2019 (vol. 19), issue 5 Go to original source...
  16. SAPIETA, M., SLUKA, P., SVOBODA, M.: Using a Numerical Model to Verification of Thermoelastic Analysis of Flat Specimen, Manufacturing Technology Journal, 2018 (vol. 18), issue 3 Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.