Manufacturing Technology 2023, 23(1):118-126 | DOI: 10.21062/mft.2023.023

Measuring the Quality of Driving Characteristics of a Passenger Car with Passive Shock Absorbers

Martin Svoboda ORCID...1, Milan Chalupa ORCID...2, Vít Černohlávek ORCID...1, Adam ©vásta ORCID...2, Artur Meller ORCID...3, Václav Schmid1
1 Faculty of Mechanical Engineering, Jan Evangelista Purkyně University in Ústí nad Labem. Pasteurova 3334/7, 400 01 Ústí nad Labem, Czech Republic
2 Faculty of Military Technologies, University of Defense in Brno, Czech Republic
3 Faculty of Mechanical Engineering, Poznan University Of Technology, Piotrowo 3 Street, 60-965 Poznań. Poland

The article deals with the quality of the driving characteristics of a passenger car with passive shock absorbers depending on the tire pressure. The work was solved using experimental methods using the AHS test bench. The main goal of the work was to assess the vehicle suspension system using acceleration sensors and pressures between the wheel and the road using shock absorber test benches using the EUSAMA and CAP methodology. The results of the work demonstrated the possibilities of using the measurement of acceleration values in selected places in the vehicle. The obtained results were also verified for the possibilities of further development in the area of reducing the dynamic load when driving a passenger car on the road.

Keywords: car, experiment, driving characteristics, acceleration, driving comfort, measurement
Grants and funding:

The presented study has been prepared with the support of the VAROPS project (DZRO VAROPS), University of Defence Brno, Czech Republic.

Received: December 16, 2022; Revised: February 16, 2023; Accepted: April 17, 2023; Prepublished online: April 24, 2023; Published: May 3, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Svoboda M, Chalupa M, Černohlávek V, ©vásta A, Meller A, Schmid V. Measuring the Quality of Driving Characteristics of a Passenger Car with Passive Shock Absorbers. Manufacturing Technology. 2023;23(1):118-126. doi: 10.21062/mft.2023.023.
Download citation

References

  1. HELEBRAT, F. Technická diagnostika a spolehlivost, 1. vyd. Ostrava: V©B, 2004. 178 l. ISBN 80-248-0650-9.
  2. DRAHORÁDOVÁ, R.; DRAHORÁD M.; JELEN K.; KUBOVÝ, P. Změny přenosové funkce segmentu lidského těla při řízení automobilu. In Engineering Mechanics 2008, Svratka, Czech Republic. 1st ed. Praha: Institute of Thermomechanics - Academy of Science, May 12 - 15, 2008. Pp. 136. ISBN 978-80-87012-11-6.
  3. SEGLA S, ROY S. Dynamic Simulation Analysis of a Motorcycle Suspension System - Assessment of Comfort. Manufacturing Technology. 2020;20(3):373-377. doi: 10.21062/mft.2020.052. Go to original source...
  4. JANDÁK, Z. Vibrace přenáąené na člověka. Státní zdravotní ústav. [online]. 2007, [cit. 2023-02-02]. Dostupné z http://www.szu.cz/tema/pracovni-prostredi/vibrace-prenasene-nacloveka
  5. HAMBERGER A, DAŇA M. Measuring the Performance Characteristics of a Motorcycle. Manufacturing Technology. 2019;19(4):573-578. doi: 10.21062/ujep/336.2019/a/1213-2489/MT/19/4/573. Go to original source...
  6. KUNDRAK J, MITSYK AV, FEDOROVICH VA, MARKOPOULOS AP, GRABCHENKO AI. Model-ing the energy action of vibration and centrifugal forces on the working medium and parts in a vibration machine oscillating reservoir with an impeller. Manufacturing Technology. 2021;21(3):364-372. doi: 10.21062/mft.2021.042. Go to original source...
  7. NAVRÁTIL, M.; PLUHAŘ, O. Měření a analýza mechanického kmitání. 1. vyd. Praha: SNTL, 1986. 401 l.
  8. CERNOHLAVEK, V.; KLIMENDA, F.; HOUSKA, P.; SUSZYŃSKI, M. Vibration Measurements on a Six-Axis Collaborative Robotic Arm-Part I. Sensors 2023, 23, 1629. ISSN: 1424-8220 Go to original source...
  9. VLK, F.: Dynamika motorových vozidel, Prof.Ing.Frantiąek Vlk, DrSc., nakladatelství a vydavatelství, BRNO 2003 ISBN 8023900242
  10. CHEN, J-C., DENNERLEIN, JT., CHANG, CC., CHANG, WR., Christiani, DC. Seat inclination, use of lumbar support and low-back pain of taxi drivers, In. Scand J Work Environ Health. 2005, pp. 258-265. ISSN 0300-8037. Go to original source...
  11. ČERNOHLÁVEK V, ©TĚRBA J, SVOBODA M, ZDRÁHAL T, SUSZYŃSKI M, CHALUPA M, KROBOT Z. Verification of the safety of storing a pair of pressure vessels. In: Manufacturing Technology. 2021;21(6):762-773. doi: 10.21062/mft.2021.097 Go to original source...
  12. ROBB, M.J., MANSFIELD, N.J. Self-reported musculoskeletal problems amonit professional truck drivers. In. Ergonomics 2007; vol. 50, pp. 814-27. ISSN (printed): 0014- 0139 Go to original source...
  13. SVOBODA, M., SCHMID, V., SOUKUP, J., SAPIETA, M.: Influence of the spring system in vehicle vi-brafon, In Vibration, Control and Stability of Dynamical systems, Lodľ, 2017, Politechnika Lodľ", pp. 505-512, ISBN 978-83-935312-5-7
  14. SVOBODA, M.; CHALUPA, M.; JELEN, K.; LOPOT, F.; KUBOVÝ, P.; SAPIETA, M.; KROBOT, Z.; SUSZYŃSKI, M. Load Measurement of the Cervical Vertebra C7 and the Head of Passengers of a Car While Driving across Uneven Terrain. Sensors 2021, 21, 3849. https://doi.org/10.3390/s21113849 Go to original source...
  15. BOVENZI, M., PINTO, I., STACCHINI, N. Low back pain in port machinerry operators. In: J Sound Vib. 2002, pp. 3-20. ISSN. 0022-460X. Go to original source...
  16. ČERNOHLÁVEK, V., SVOBODA, M., ©TĚRBA, J., CHALUPA, M., SAPIETA, M.: Analytical and experi-mental solution of vibrations of a system of bound bodies, In: Manufacturing Technology, Vol. 20, No 6 (2020) , pp. 699-707, ISSN: 1213-2489, DOI: 10.21062/mft.2020.116 Go to original source...
  17. CHALUPA, M., SVOBODA, M., VEVERKA, J., The Passability of the Track Vehicle, In: ECS Trans. 2019 volume 95, issue 1, pp. 457-466, , ISSN 1938-6737, doi: 10.1149/09501.0457ecst Go to original source...
  18. SUSZYŃSKI, M.; PETA, K.; ČERNOHLÁVEK, V.; SVOBODA, M. Mechanical Assembly Sequence Determination Using Artificial Neural Networks Based on Selected DFA Rating Factors. Symmetry 2022, 14, 1013. ISSN: 2073-8994 Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.