Manufacturing Technology 2023, 23(1):81-87 | DOI: 10.21062/mft.2023.024
Adhesion of Various Geopolymers Coatings on Metal Substrates
- Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
This article deals with adhesion of various alkali-activated metakaolin-based geopolymer coatings on structural steel 1.0038 (according to EN 10025-2). This steel alloy was chosen in order to analysis ad-hesion of prepared geopolymer coatings. Our samples were characterized by laser and SEM micros-copy and grid test was performed. Microscopy was performed to get knowledge about visible charac-terization and overall quality of prepared coatings. Based on previous research SEM results corre-spond with properties changes in coatings and their classification of grid test. Grid test was per-formed and results was evaluated. These results show potential of our prepared GP and could be used as base for further research and possible application as anti corrosion coatings in construction or fire-resistant barriers. The aim of the research was to prepare alkali-activated metakaolin-based geopoly-mer on a structural steel substrate, to evaluate the visual quality of the coatings and to evaluate the results of the grid test.
Keywords: geopolymer, structural steel, microstructure, grid test, adhesion
Grants and funding:
This research was supported by U21 Q-GRANT MSMT No. CZ.02.2.69/0.0/0.0/19_073/0016947
Received: November 30, 2022; Revised: April 13, 2023; Accepted: April 17, 2023; Prepublished online: April 24, 2023; Published: May 3, 2023 Show citation
References
- KOLEK, T. (2021). Research on the Properties of Geopolymer Coatings Doped with Particles of Alloys and Metal Oxides. Master's Thesis, Jan Evangelista Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Institute of Technology and Materials, Ústí nad Labem, Czech Republic
- MATSIMBE, J.; DINKA, M.; OLUKANNI, D.; MUSONDA, I. (2022). Geopolymer: A systematic review of methodologies. In: Materials, 15, 6852
Go to original source...
- PERNA, I.; HANZLICEK, T.; ZALOUDKOVA, M. (2020). Microscopic study of the concrete/geopolymer coating interface. In: Ceram. Silikáty, 64, 68-74
Go to original source...
- AZIMI, E.A.; AL BAKRI ABDULLAH, M.M.; MING, L.Y.; YONG, H.C.; HUSSIN, K.; AZIZ, I.H. (2016). Processing and properties of geopolymers as thermal insulating materials: A review. In: Rev. Adv. Mater. Sci., 44, 273-285
- BARBOSAA, V.F.; MACKENZIEB, K.J.; THAUMATURGO, C. (2000). Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: Sodium polysialate polymers. In: Int. J. Inorg. Mater. 2, 309-317
Go to original source...
- PENG, H.; CUI, C.; CAI, C.S.; LIU, Y.; LIU, Z. (2019). Microstructure and microhardness property of the interface between a metakaolin/GGBFS-based geopolymer paste and granite aggregate. In: Constr. Build. Ma-ter. 221, 263-273
Go to original source...
- JAMALUDIN, L.; RAZAK, R.A.; AL BAKRI ABDULLAH, M.M.; KUSBIANTORO, A.; YAHYA, Z.; ABDULLAH, A.; SANDU, A.V. (2021). Geopolymer coating paste on concrete for photocatalytic performance. In: AIP Conf. Proc., 2339, 020187
Go to original source...
- HORKY, R. (2021). Analysis of the effect of geopolymer coatings on thermal dilatations of metal alloys. Master's Thesis, Jan Evangelista Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Institute of Technology and Materials, Ústí nad Labem, Czech Republic
- WENG, L.; SAGOE-CRENTSIL, K. (2007). Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I-Low Si/Al ratio systems. In: J. Mater. Sci., 42, 2997-3006
Go to original source...
- JAMALUDIN, L.; RAZAK, R.A.; AL BAKRI ABDULLAH, M.M.; VIZUREANU, P.; BRAS, A.; IMJAI, T.; SANDU, A.V.; RAHIM, S.Z.; YONG, H.C. (2022). The suitability of photocatalyst precursor materials in geopolymer coating applications: A review. In: Coatings, 12, 1348
Go to original source...
- DAVIDOVITS, R.; PELEGRIS, C.; DAVIDOVITS, J. (2019). Standardized method in testing commercial metakaolins for geopolymer formulations. In: Geopolym. Inst. Libr.
- ERDMAN, V. (2020). Creating coatings based on geopolymer suspension. Bachelor's Thesis, Jan Evangelista Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Institute of Technology and Materials, Ústí nad Labem, Czech Republic
- YONG, S.L.; FENG, D.W.; LUKEY, G.C.; VAN DEVENTER, J.S.J. (2007). Chemical characterisation of the steel-geopolymeric gel interface. In: Colloid Surfaces. Physicochem. Eng. Asp. 302, 411-423
Go to original source...
- PURI, R.G.; KHANNA, A.S. (2016). Intumescent coatings: A review on recent progress. In: J. Coat. Technol. Res., 14, 1-20
Go to original source...
- BEH, J.H.; YEW, M.C.; SAW, L.H.; YEW, M.K. (2020). Fire Resistance and Mechanical Properties of In-tumescent Coating Using Novel BioAsh for Steel. In: Coatings, 10, 1117
Go to original source...
- KAZMINA, O.; LEBEDEVA, E.; MITINA, N.; KUZMENKO, A. (2018). Fire-proof silicate coatings with magnesium-containing fire retardant. In: J. Coat. Technol. Res., 15, 543-554
Go to original source...
- BRICÍN, D., KŘÍ®, A., NOVOTNÝ, J., ©PIRIT, Z. (2022). The Effect of Boriding and Heat Treatment on the Structure and Properties of 100Cr6 Steel. In: Manufacturing Technology, 22(1), 2-9
Go to original source...
- HREN I., MICHNA, ©., NOVOTNÝ, J., MICHNOVÁ, L. (2021). Comprehensive analysis of the coated component from a FORD engine. In: Manufacturing Technology, 21(4), 464-470
Go to original source...
- BRESTAN, T. (2022). Evaluation of the Possibility of Creating Building Materials Using Energy By-Products. Bachelor's Thesis, Jan Evangelista Purkyně University in Ústí nad Labem, Faculty of Mechanical Engineering, Institute of Technology and Materials, Ústí nad Labem, Czech Republic
- VICKERS, L.; RIESSEN, V.A.; RICKARD, W.D.A. (2015). Fire-Resistant Geopolymers Role of Fibres and Fillers to Enhance Thermal Properties; Springer: Berlin, Germany, 10-14
Go to original source...
- NOVOTNY, J.; JASKEVIC, M.; MAMON, F.; MARES, J.; HORKY, R.; HOUSKA, P. (2022). Manufacture and Characterization of Geopolymer Coatings Deposited from Suspensions on Aluminium Substrates. In: Coatings, 12, 1695
Go to original source...
- ISO 2409:2020(en), Paints and varnishes - Pull-off test for adhesion
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.