Manufacturing Technology 2023, 23(2):225-232 | DOI: 10.21062/mft.2023.026

Fire Resistance Test of Geopolymer Coatings on Non-Metallic Underlying Substrates

Filip Mamoń ORCID..., Martin Jaskevič ORCID..., Jakub Mareš ORCID..., Jan Novotný ORCID...
Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic

This article summarizes the results from the fire resistance test of geopolymer suspensions in the form of coatings on non-metallic substrates. Their heat resistance was evaluated based on the burn-through time compared to the uncoated substrate. Non-metallic substrate materials, extruded polystyrene (XPS) and chipboard (DTD) were chosen as the underlying substrates for GP suspension research. Parameters from the fire resistance test as fire test duration of geopolymer coatings and percentage increase in burn time of geopolymer coatings on an XPS and DTD substrates compared to an uncoated substrate were evaluated. One of the discussed point was also the addition of CaCO3 and Al(OH)3 for studding flame retardancy effect.

Keywords: geopolymer, coatings, fire resistance test, non-metallic substrate, flame retardancy
Grants and funding:

This research was supported by U21 Q-GRANT MSMT No. CZ.02.2.69/0.0/0.0/19_073/0016947

Received: December 6, 2022; Revised: April 17, 2023; Accepted: April 17, 2023; Prepublished online: April 25, 2023; Published: May 4, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Mamoń F, Jaskevič M, Mareš J, Novotný J. Fire Resistance Test of Geopolymer Coatings on Non-Metallic Underlying Substrates. Manufacturing Technology. 2023;23(2):225-232. doi: 10.21062/mft.2023.026.
Download citation

References

  1. PURI, R.G.; KHANNA, A.S. (2016). Intumescent coatings: A review on recent progress. J. Coat. Technol. Res. 14, pp. 1-20 Go to original source...
  2. LUCHERINI, A.; MALUK, C. (2019). Intumescent coatings used for the fire-safe design of steel structures: A review. J. Constr. Steel Res. 162, 105712 Go to original source...
  3. DAS, A.K. (2020). Principles of Fire Safety Engineering: Understanding Fire and Fire Protection. PHI Learning Private Limited: Delhi, India
  4. BEH, J.H.; YEW, M.C.; SAW, L.H.; YEW, M.K. (2020). Fire Resistance and Mechanical Properties of Intumescent Coating Using Novel BioAsh for Steel. Coatings, 10, 1117 Go to original source...
  5. AZIZ, I.H., AL BAKRI ABDULLAH, M.M., YONG, H.C., MING, L.Y., HUSSIN, K., SURLEVA, A., AZIMI, E.A. (2016). Manufacturing parameters influencing fire resistance of geopolymers: A review. Proceedings of the Institution of Mechanical Engineers, Part L. Journal of Materials: Design and Applications, 233 Go to original source...
  6. KAZMINA, O.; LEBEDEVA, E.; MITINA, N.; KUZMENKO, A. (2018). Fire-proof silicate coatings with magnesium-containing fire retardant. J. Coat. Technol. Res. 15, pp. 543-554 Go to original source...
  7. CHEN, S.N.; LI, P.-K.; HSIEH, T.H.; HO, K.S.; HONG, Y.M. (2021). Enhancements on Flame Resistance by Inorganic Silicate-Based Intumescent Coating Materials. Materials, 14, 6628 Go to original source...
  8. BRICIN D., KRIZ A., NOVOTNY J., SPIRIT Z. (2022). The Effect of Boriding And Heat Treatment on the Structure and Properties of 100Cr6 Steel. Manufacturing Technology, 22, pp. 2-9 Go to original source...
  9. HREN I., MICHNA S., NOVOTNY J., MICHNOVA L. (2021) Comprehensive analysis of the coated component from a FORD engine. Manufacturing Technology, 21, pp. 464-470 Go to original source...
  10. VICKERS, L.; VAN RIESSEN, A.; RICKARD, W.D.A. (2015). Fire-Resistant Geopolymers: Role of Fibres and Fillers to Enhance Thermal Properties. Springer, ISSN 2192-1105 Go to original source...
  11. LAHOTI, M., TAN, K. H., YANG, E.-H. (2019). A critical review of geopolymer properties for structural fire-resistance applications. Construction and Building Materials, 221, pp. 514-526 Go to original source...
  12. AMRAN, M., HUANG, S.S., DEBBARMA, S., RASHID, R.S.M. (2022). Fire resistance of geopolymer concrete: A critical review. Construction and Building Materials, 324 Go to original source...
  13. SAPUTRA, A.H., SUNGKAR, F. (2017). Synthesis and characterization of non-halogen fire retardant composite through combination of epoxy resin, Al(OH)3 additive and filler. In Proceedings of the American Institute of Physics Conference, Proceedings of the 3rd International Symposium on Applied Chemistry, Jakarta, Indonesia, pp. 23-24 Go to original source...
  14. FIBRAN XPS ETICS GF-I (EN 13164), Extruded polystyrene
  15. ČSN EN 312 (P2), Raw chipboard
  16. MICHNA, S., NOVOTNY, J., JASKEVIC, M., CERNY, Z., ROSYPAL, P. (2022). PV 2021-103. Geopolymer suspension and preparing it. University J. E. Purkyne in Usti nad Labem.
  17. NOVITNY, J., JASKEVIC, M., MAMON, F., MARES, J., HORKY, R., HOUSKA, P. (2022) Manufacture and Characterization of Geopolymer Coatings Deposited from Suspensions on Aluminium Substrates. MDPI Coatings, 12, 1695 Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.