Manufacturing Technology 2023, 23(2):233-240 | DOI: 10.21062/mft.2023.027
Geometric Accuracy of Components Manufactured by SLS Technology Regarding the Orientation of the Model during 3D Printing
- 1 Faculty of Mechanical Engineering, Žilinská univerzita v Žiline, Univerzitná 8215/1, 010 26 Žilina, Slovakia
- 2 Faculty of Mechanical Engineering, Jan Evangelista Purkyne University in Usti nad Labem, Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
Selective Laser Sintering (SLS) or sintering of polymer powders is one of the most well-known additive technologies for printing 3D components. The properties of individual polymer powder materials have a significant impact on the quality of the manufactured part. Potential deformation and shrinkage can occur during printing if a significant number of parts are piled on top of one another or are oriented incorrectly, accumulating thermal energy in certain areas. The aforementioned research focuses on an experimental study to investigate the impact of the distribution and orientation of printing samples in the build chamber on the accuracy of dimensions and the surface roughness of PA12 prints. The aim of the study was to examine the impact of model settings during production as well as the effect of individual factors on the properties of manufactured parts, with a focus on ensuring that heat rises evenly from each print without accumulating.
Keywords: Additive Manufacturing, Selective Laser Sintering, Geometric Accuracy, PA12
Grants and funding:
This publication is the result of support under the Operational Program Integrated Infrastructure for the project: Strategic implementation of additive technologies to strengthen the intervention capacities caused by the COVID-19 pandemic ITMS code: 313011ASY4, co-financed by the European Regional Development Fund
Received: January 27, 2023; Revised: April 14, 2023; Accepted: April 18, 2023; Prepublished online: April 25, 2023; Published: May 4, 2023 Show citation
ACS | AIP | APA | ASA | Harvard | Chicago | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- KABIR, S.M.F., MATHUR, K., SEYAM, A.F.M. (2020). A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties, In: Composite Structures, Vol. 232: 111476. https://doi.org/10.1016/j.compstruct.2019.111476.
Go to original source...
- STAVROPOULOS, P., FOTEINOPOULOUS, P. (2018). Modelling of additive manufacturing processes: A review and classification, In: Manufacturing Review, Vol. 5, No. 2. https://doi.org/10.1051/mfreview/2017014.
Go to original source...
- WANG, X., JIANG, M., ZHOU, Z., GOU, J., HUI, D. (2017). 3D printing of polymer matrix composites: A review and prospective, In: Composites Part B: Engineering, Vol. 110, pp. 442-458. https://doi.org/10.1016/J.COMPOSITESB.2016.11.034.
Go to original source...
- CAI, C., TEY, W.S., CHEN, J., ZHOU, W., LIU, X., LIU, T., ZHAO, L., ZHOU, K. (2021). Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion, In: Journal of Materials Processing Technology, Vol: 288: 116882. https://doi.org/10.1016/j.jmatprotec.2020.116882.
Go to original source...
- FINA, F., GOYANES, A., GAISFORD, S., BASIT, A.W. (2017). Selective laser sintering (SLS) 3D print-ing of medicines, In: International journal of pharmaceutics, Vol. 529, No. 1-2, pp. 285-293. https://doi.org/10.1016/j.ijpharm.2017.06.082.
Go to original source...
- DE OLIVEIRA SETTI, G., DE OLIVEIRA, M.F., MAIA, I.A., DA SILVA, J.V.L., SAVU, R., JOANNI, E. (2014). Correlation between mechanical and surface properties of SLS parts, In: Rapid Prototyping Journal, Vol. 20, No. 4, pp. 285-290. https://doi.org/10.1108/RPJ-08-2012-0070.
Go to original source...
- TOMANIK, M., ŻMUDZINSKA, M., WOJTKOV, M. (2021). Mechanical and structural evaluation of the PA12 desktop selective laser sintering printed parts regarding printing strategy. In: 3D Printing and Additive Manufacturing, Vol. 8, No. 4, pp. 271-279. https://doi.org/10.1089/3dp.2020.0111.
Go to original source...
- WI, K., SURESH, V., WANG, K., LI, B., QIN, H. (2019). Quantifying quality of 3D printed clay objects using a 3D structured light scanning system, In: Additive Manufacturing, Vol.32: 100987. https://doi.org/10.1016/j.addma.2019.100987.
Go to original source...
- DIZON, J. R. C., ESPERA Jr, A. H., CHEN, Q., ADVINCULA, R. C. (2018). Mechanical characterisation of 3D-printed polymers. In: Additive manufacturing, Vol. 20, pp. 44-67. https://doi.org/10.1016/j.addma.2017.12.002.
Go to original source...
- SACHDEVA, A., SINGH, S., SHARMA, V. S. (2013). Investigating surface roughness of parts produced by SLS process. In: The International Journal of Advanced Manufacturing Technology, Vol. 64, pp. 1505 - 1516. https://doi.org/10.1007/s00170-012-4118-z.
Go to original source...
- LAUNHARDT, M., WORZ, A., LODERER, A., LAUMER, T., DRUMMER, D., HAUSOTTE, T., SCHMIDT, M. (2016). Detecting surface roughness on SLS parts with various measuring techniques. In: Polymer Testing, Vol. 53, pp. 217-226. https://doi.org/10.1016/j.polymertesting.2016.05.022.
Go to original source...
- DADBAKHS, S., VERBELEN, L., VERKINDEREN, O., STROBBE, D., VAN PUYVELDE, P., KRUTH, J. P. (2017). Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts. In: European Polymer Journal, Vol. 92, pp. 250-262. https://doi.org/10.1016/j.eurpolymj.2017.05.014.
Go to original source...
- TYAGI, P., GOULET, T., RISO, C., STEPHENSON, R., CHUENPRATEEP, N., SCHLITZER, J., GARCIA-MORENO, F. (2019). Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing. In: Additive Manufacturing, Vol. 25, pp. 32-38.. https://doi.org/10.1016/j.addma.2018.11.001.
Go to original source...
- KLINGAA, C. G., DAHMEN, T., BAIER, S., MOHANTY, S., HATTEL, J. H. (2020). X-ray CT and image analysis methodology for local roughness characterization in cooling channels made by metal additive manufacturing. In: Additive Manufacturing, Vol. 32: 101032. https://doi.org/10.1016/j.addma.2019.101032.
Go to original source...
- CUSTOMPART (2022). Selective Laser Sintering [online]. https://www.custompartnet.com/wu/selective-laser-sintering
- BĚHÁLEK, L. (2015). Polymery [online]. https://publi.cz/books/180/18.html
- YANG, F., ZOBEIRY, N., MAMIDALA, R., CHEN, X. (2022). A review of aging, degradation, and reusability of PA12 powders in selective laser sintering additive manufacturing. In: Materials Today Communications
Go to original source...
- RAZAVIYE, M. K., TAFTI, R. A., KHAJEHMOHAMMADI, M. (2022). An investigation on mechanical properties of PA12 parts produced by a SLS 3D printer: An experimental approach. In: CIRP Journal of Manufacturing Science and Technology, Vol. 38, pp. 760-768.
Go to original source...
- SINTERIT (2020) [online]. https://www.sinterit.com/wp-content/uploads/2020/12/Sinterit-Powders_Specification-PA12-Smooth.pdf
- MINITAB (2022). Design an experiment [online]. https://support.minitab.com/en-us/minitab/18/getting-started/designing-an-experiment/
- PETZOLD, S., KLETT, J., SCHAUER, A., OSSWALD, T.A. (2019). Surface roughness of polyamide 12 parts manufactured using selective laser sintering. In: Polymer Testing, Vol. 80 https://doi.org/10.1016/j.polymertesting.2019.106094
Go to original source...
- OPTIMAX (2022). Alicona Infinite Focus G5+[online]. https://optimaxonline.com/non-contact-metrology-3d-surface-characterisation/37/alicona-infinitefocus-g5+
- TIMKO, P., CZÁNOVÁ, T., CZÁN, A., SLABEJOVÁ, S., HOLUBJAK, J., CEDZO, M. (2022). Analysis of Parameters of Sintered Metal Components Created by ADAM and SLM Technologies. In: Manufacturing Technology, Vol. 22, No. 3, pp. 347-355. https:// 10.21062/mft.2022.032.
Go to original source...
- ROUDNICKA, M., VOJTECH, D., DANIEL, M. (2020). Aspects of Selective Laser Melting Technology Considered in the Preparation of Trabecular Structures for Bone Tissue Substitution. In: Manufacturing Technology, Vol. 20, No. 4, pp. 507-515. https:// 10.21062/mft.2022.065.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.