Manufacturing Technology 2023, 23(2):136-142 | DOI: 10.21062/mft.2023.028

Analysis of the Substitutability of Conventional Technologies in the Design of a Clamping Vise for Measurement Using an Optical Measuring System

Miroslav Cedzo ORCID..., Jozef Holubják ORCID..., Tatiana Czánová ORCID..., Pavol Timko ORCID..., Peter Kozový ORCID..., Mário Drbúl ORCID...
Faculty of Mechanical Engineering, ®ILINSKÁ UNIVERZITA V ®ILINE, Univerzitná 8215/1, 010 26 ®ilina, Slovakia

The work deals with the possibility of using additive technology in the production of positioning and clamping device. The designed clamping device will facilitate and accelerate the measurement of samples with inclined or different irregular surfaces. The designed device is manufactured by additive technology using composites. Onyx material reinforced with Kevlar fibers was used as material for composite printing. The designed device should achieve the required properties for the firm and stable clamping of the components during the measurement process, and its weight should be significantly reduced with the use of composite material.

Keywords: Additive Technologies, Composite Materials, Design of a Clamping Vise
Grants and funding:

This publication is the result of support under the Operational Program Integrated Infrastructure for the project: Strategic implementation of additive technologies to strengthen the intervention capacities caused by the COVID-19 pandemic ITMS code: 313011ASY4, co-financed by the European Regional Development Fund

Received: December 17, 2022; Revised: April 17, 2023; Accepted: April 18, 2023; Prepublished online: April 25, 2023; Published: May 4, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Cedzo M, Holubják J, Czánová T, Timko P, Kozový P, Drbúl M. Analysis of the Substitutability of Conventional Technologies in the Design of a Clamping Vise for Measurement Using an Optical Measuring System. Manufacturing Technology. 2023;23(2):136-142. doi: 10.21062/mft.2023.028.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MA, C., FAUST, J., D. ROY-MAYHEW, J. (2021). Drivers of mechanical performance variance in 3D- printed fused filament fabrication parts: An Onyx FR case study. Polymer Composites. 42, pp. 4786- 4794. Go to original source...
    2. DOU, H., CHENG, Y., YE, W., ZHANG, D., LI, J., MIAO, Z., RUDYKH, S. (2020). Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites. Materials 2020, 13, 3850. Go to original source...
    3. IVANOVA, O.; WILLIAMS, C.; CAMPBELL, T. (2013). Additive manufacturing (AM) and nanotechnology: Promises and challenges. Rapid Prototyp. J. 2013, 19, pp. 353-364. Go to original source...
    4. NOWINKA, B., SYKUTERA, D., (2021). Mechanical properties of carbon fiber reinforced polyamide produced by CFF method (Continuous Filament Fabrication). MATEC Web of Conferences 332, Go to original source...
    5. PRAJAPATI, A.R., DAVE, H.K., RAVAL, H.K., (2021). Effect of fiber volume fraction on the impact strength of fiber reinforced polymer composites made by FDM process. Materials Today: Proceedings 44 , pp. 2102-2106 Go to original source...
    6. B., REDWOOD, F., SCHÖFFER, B., GARRET. (2017). The 3D Printing Handbook: Technologies, design and applications. Amsterdam: 3D Hubs B.V., ISBN 978-90-827485-0-5.
    7. STRATASYS. Additive Manufacturing Aids: Jigs & Fixtures. [online]. [cit. 2018-04-26].Dostupné z: http://usglobalimages.stratasys.com/Main/Secure/Webinars/JF%20Webinar.pdf?v=636132642088616 322
    8. STRATASYS. 3D Printing Jigs & Fixtures for the Production Floor. [online]. 2016 [cit. 2018-04-26]. Dostupné z:https://www.stratasysdirect.com/-/media/files/direct/white- papers/jigs-and-fixtures-whitepaper.pdf
    9. STRATASYS. 3D Printing Jigs, Fixtures and Other Manufacturing Tools [online]. [cit. 2018-04-26]. Dostupné z: http://www.stratasys.com/~/media/main/files/white%20papers/ssyswp3dprintingjigsfixtures0112
    10. D., LEONG, A., CREASE. MARKFORGED. Markforged Webinar Series: Additive Manufacturing in Subtractive Word. [online]. [cit. 2018-04-26]. Dostupné z: https://markforged.com/video/additive-manufacturing-in-a-subtractive-world/
    11. PERNICA, J., VODÁK, M., ©AROCKÝ, R., ©USTR, M., DOSTÁL, P., ČERNÝ, M. & DOBROCKÝ, D. 2022. Mechanical Properties of Recycled Polymer Materials in Additive Manufacturing. Manufacturing Technology, 22, 200-3. Go to original source...
    12. SEDLAK, J., JOSKA, Z., HRBACKOVA, L., JURICKOVA, E., HRUSECKA, D. & HORAK, O. 2022. Determination of Mechanical Properties of Plastic Components Made by 3D Printing. Manufacturing Technology, 22, 733-46. Go to original source...
    13. JIRKOVÁ, H., OPATOVÁ, K., KUČEROVÁ, L., ZETKOVÁ, I., JENÍČEK, ©. & BURDOVÁ, K. 2022. Effects of Heat Treatment on Microstructural Evolution in Additively-manufactured Parts of Various Heights from Maraging Steel. Manufacturing Technology, 22, 14-9. Go to original source...
    14. D., LEONG, M., MADECKI. MARKFORGED. How to 3D Print Soft Jaws with a Mark- forged Printer. [online]. [cit. 2018-04-26]. Dostupné z: https://markforged.com/video/how-to-3d-print- soft-jaws-with-a-markforged-printer/?aliId=15082048
    15. D., LEONG, A., CREASE. MARKFORGED. [online]. [cit. 2018-04-26]. Efficient Fiber Routing for Optimized Strength. Dostupné z: https://markforged.com/video/efficient-fiber-routing-for- optimized-strength/
    16. A., CREASE. MARKFORGED. Introducing Our New Markforged Material: Onyx. [online]. 2016 [cit. 2018-04-26]. Dostupné z: https://markforged.com/blog/introducing-our-new-markforged- material-onyx/
    17. A., CREASE. Improving Dimensional Stability in 3D Printing with Onyx. [online]. 2016 [cit. 2018-04- 26]. Dostupné z: https://markforged.com/blog/improving-dimensional-stability-in-3d-printing-with- onyx/
    18. A., CREASE. MARKFORGED. Reinforcing 3D Printed Parts with Efficient Fiber Routing: Part 1. [online]. 2016 [cit. 2018-04-26]. Dostupné z: https://markforged.com/blog/reinforcing-3d-printed- parts-part-1/
    19. A., CREASE. MARKFORGED. Efficient Fiber Routing Techniques Part 2: Advanced Routing Options. [online]. 2016 [cit. 2018-04-26]. Dostupné z: https://markforged.com/blog/reinforcing-3d- printed-parts-pa

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content