Manufacturing Technology 2023, 23(4):485-494 | DOI: 10.21062/mft.2023.066

Exploration and Realization about Teaching Experimental of CNC Machine Tool Based on Virtual Simulation Technology

Lifu Liu ORCID...1, Wei Li ORCID...2, Xuerui Chen ORCID...3
1 Art and Design College, Southwest Forestry University, Kunming, China
2 School of Mechanical and Transportation, Southwest Forestry University, Kunming, China
3 Weihai Vocational College, Weihai, China

In order to cultivate students' professional skills and enhance students' practical ability, this paper proposes to create a virtual simulation experiment system of NC machine tool based on SolidWorks software platform, taking vertical machining center as the research object, which is integrated by three modules of NC machine tool structure, machine tool operation and machine tool processing. Firstly, the detailed assembly relationship of each subsystem of the machine tool, the assembly rela-tionship of the overall equipment and the system composition are displayed intuitively by 3D modeling, so that students can understand the 3D modeling method and structure composition of complex CNC machine tools. Secondly, according to the machining process characteristics of vertical machining center, using typical parts to create the virtual simulation platform to carry out complex parts programming and machining methods and steps based on vertical machining center. Through the full combination of virtual simulation experiment and actual equipment, it has significant results in improving students' interest in learning, ensuring teaching effect, reducing material waste, avoiding machine tool accidents and so on. And combined with the actual processing, operation of CNC machine tool experiment to achieve the combination of virtual and real, vivid image, rigorous and realistic, open and sharing, expand the numerical control technology class teaching and talent training. It also provides a good reference for similar curriculum development.

Keywords: Virtual simulation, Numerical control training, Design of experiment, Simulation platform
Grants and funding:

This project was funded by the “Yunnan Province higher education undergraduate teaching achievement project cultivation” (Liwei), the Science Research Fund Project of the Yunnan Provincial Department of Education (2019J0189), Southwest Forestry University teaching reform project (2023 Liulifu). We also thank Chen Xuerui for help in the design and completion of the project

Received: May 12, 2023; Revised: August 12, 2023; Accepted: August 30, 2023; Prepublished online: August 30, 2023; Published: September 5, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Liu L, Li W, Chen X. Exploration and Realization about Teaching Experimental of CNC Machine Tool Based on Virtual Simulation Technology. Manufacturing Technology. 2023;23(4):485-494. doi: 10.21062/mft.2023.066.
Download citation

References

  1. MADENG CHENG, HUYONG BIAO. ZHANGXIN RONG. Design of Virtual Simulation Experiment Teaching Project for Road Construction. Research and Exploration in Laboratory, 2020, (2): 136-140.
  2. YEHAIWANG, LEITAO, LIMEI. Virtual Simulation Experiment System and Teaching Practiceof Blast-ing Engineering. BLASTING, 2020(3): 153-157.
  3. QUAN XIAOLI, GU LIANGLING. Design of electronic virtual experiment system based on Lab-VIEW. Experimental Technology and Management 2018, 35(2): 121-123, 129.
  4. NING YUL, CHENG XIANG. Seelight Design and application of See Light optical virtual simulation experimental platform, Experimental Technology and Management, 2020(4): 142-146.
  5. YANG FUQIANG, YANG JIAN. Construction of Virtual simulation experimental teaching platform for Safety Engineering specialty, Experimental Technology and Management, 2020(3): 242-245, 254.
  6. LI YUN. Application of Virtual Simulation Technology in the Teaching of computer Network Course, Education Teaching Forum, 2020(7): 391-392.
  7. ZHAIMING, JIANGBAO CHENG, ZENGLING YAN. Undergraduate and Postgraduate Integrated Experimental Teaching and Management Practice For Energy and Power Specialties Based on Virtual Simulation Platform, Research and Exploration in Laboratory, 2020(5): 187-192.
  8. WEI PING, SHUZHI CHENG. Ideological and Political Teaching Reform of Food Quality Control and Management Course in Applied Universities, AnHui Agriculture Science, 2022(16): 261-264.
  9. SEUNG-HO HOM, MYUNG-IJ ROH, LUMAN ZHAO. Integrated method of analysis, visualization, and hardware for ship motion simulation. Journal of Computational Design and Engineering, 2018(7): 285-298. Go to original source...
  10. JENNIFER CRITTENDEN, KAYLA THOMPSON, Motivations and Experiences of Older Adult Volunteers in a Telehealth Nursing Simulation Activity, Innovation in Aging, 2021(1): 945. Go to original source...
  11. DIANE JASS KETELHUT, STEVEN M. NIEMI. Emerging Technologies in Education and Training: Applications for the Laboratory Animal Science Community, ILAR Journal, 2007(2): 163-169. Go to original source...
  12. QIAN CHENG, SHUQING JIANG, FENG Xu. Genome optimization via virtual simulation to accelerate maize hybrid breeding, Briefings in Bioinformatics, 2022(1): 1-13. Go to original source...
  13. AI NI, LI-XUAN QIN. Performance evaluation of transcriptomics data normalization for survival risk prediction, Briefings in Bioinformatics, 2021(11): 1-8.
  14. CHANDRASENA PREMAWARDHENA, N., ICT in the foreign language classroom in Sri Lanka: A journey through a decade. 10th World Conference on Computers in Education (WCCE 2013), Nicolaus Copernicus University, July 2-5 2013, Torun, Poland.pp 223-224
  15. MELLER, A., SUSZYŃSKI, M., LEGUTKO, S., TRĄCZYŃSKI, M. & CERNOHLAVEK, V. 2023. Studies on a Robotised Process for Forging Steel Synchronizer Rings in the Context of Forging Tool Life. Manufacturing Technology, 23, 88-98. Go to original source...
  16. SLABEJOVÁ, S., ©AJGALÍK, M., TIMKO, P., KOZOVĘ, P., NOVÁK, M. & CEDZO, M. 2023. Analysis of Cutting Forces during Machining with Additive-Produced Milling Head. Manufacturing Technology, 23, 254-259. Go to original source...
  17. CHANDRASENA. PREMAWARDHENA, N. (2012). Introducing Computer Aided Language Learning to Sri Lankan Schools: Challenges and Perspectives. 15th International Conference on Interactive Collaborative Learning and 41st International Conference on Engineering Pedagogy (ICL & IGIP), Villach, Austria. Go to original source...
  18. FABIAN, M., HUÒADY, R. & KUPEC, F. 2022. Reverse Engineering and Rapid Prototyping in the Process of Developing Prototypes of Automotive Parts. Manufacturing Technology, 22, 669-678. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.