Manufacturing Technology 2023, 23(6):1006-1012 | DOI: 10.21062/mft.2023.115
Research on Elastic Characteristics of Negative Pressure Rubber Isolator
- Institute of Mechanical and Electrical Engineering, Lingnan Normal University. Zhanjiang. China
Aiming at obtaining ultra-low kinematic stiffness and improving the isolation property of low frequency vibration, it is necessary to solve the coupling parameters and rated load of air negative pressure characteristics and rubber characteristics, in order to achieve an ideal elastic characteristic curve of air negative pressure spring. Firstly, the background and working principle of the negative pressure rubber isolation were introduced. In addition, the FEA model of isolator is built based on Mooney-Rivlin constitutive model of rubber. Furthermore, to testify the validity of the mathematical model, the static characteristic and simulation analysis of isolator are studied. The experimental data and characteristic curve of different negative pressure were obtained, the simulated results show a good agreement with those of corresponding experiments. Finally, they also illustrate the validity of the vibration isolation, which realizes better performance of low-frequency vibration isolation.
Keywords: Vibration Isolation, Low-frequency, Constitutive Model, Elastic Characteristics
Grants and funding:
The research is partly supported by the National Natural Science Foundation of China (No. 51275061), The authors acknowledge the Science & Technology Development Special Competitive Project of Zhanjiang City (No. 2020A01010), the Natural Science Research Talents Project of Lingnan Normal University (No. ZL2025)
Received: September 4, 2023; Revised: December 7, 2023; Accepted: December 19, 2023; Prepublished online: December 19, 2023; Published: December 22, 2023 Show citation
References
- ZHU, S., LOU, J., HE, Q., WENG, X., (2006). Vibration theory and vibration isolation, pp.112-125. National Defence Industry Press, Bei Jing. ISBN 7118044687.
- QI, W., YAN, G., LU, J., YAN, H., SHI, J., WEI, X., WANG, S., ZHANG, W., (2022). Magnetically modulated sliding structure for low frequency vibration isolation. In: Journal of Sound and Vibration, Vol. 526, pp.116819.
Go to original source...
- WU, J., ZENG, L., HAN, B., ZHOU, Y., LUO, X., LI, X., CHEN, X., JIANG, W., (2022). Analysis and design of a novel arrayed magnetic spring with high negative stiffness for low-frequency vibration isolation. In: International Journal of Mechanical Sciences, Vol. 216, pp.106980.
Go to original source...
- WANG, Q., ZHOU, J., XU, D., OUYANG, H., (2020). Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport. In: Mechanical Systems and Signal Processing, Vol. 139, pp. 106633.
Go to original source...
- HE, B., YANG, K., WU, S., (2022). Design and Characteristic Analysis of a Tensile Quasi-zero Stiffness Vibration Isolation System. In: Noise and Vibration Control, Vol. 42, No. 6, pp. 240-246.
- LI, X., SUN, W., SHANG, D., (2022). Analysis of vibration isolation characteristics of a compound nonlinear low frequency vibration isolator. In: Journal of Ship Mechanics, Vol. 26, No.7, pp. 1077-1087.
- HU, X., ZHOU, C., (2022). The effect of various damping on the isolation performance of quasi-zero-stiffness system. In: Mechanical Systems and Signal Processing, Vol. 171, pp.108944.
Go to original source...
- TIAN, Y., CAO, D., CHEN, C., ZHANG, X., (2023). Vibration isolation performance of a rectangular panel with high-static-low-dynamic stiffness supports. In: Applied Mathematical Modelling, Vol. 119, pp. 218-238.
Go to original source...
- WEN, G., LIN, Y., HE, J., (2022) A quasi-zero-stiffness isolator with a shear-thinning viscous damper. In: Applied Mathematics and Mechanics, Vol. 43, No.3, pp. 311-326.
Go to original source...
- WANG, Q., ZHOU, J., WANG, K., XU, D., WEN, G., (2021). Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs. In: Science China-Technological Sciences, Vol. 64, pp. 2255-2271.
Go to original source...
- YE, K., JI J., FITCH, R., (2023). Further investigation and experimental study of an origami structure-based quasi-zero-stiffness vibration isolator. In: International Journal of Non-Linear Mechanics, Vol. 157, pp. 104554.
Go to original source...
- HAN, W., LU, Z., NIU, M., CHEN, L., (2022). A high-static-low-dynamics stiffness vibration isolator via an elliptical ring. In: Mechanical Systems and Signal Processing, Academic, England. Vol. 162, pp. 108061.
Go to original source...
- NAVAZI, H., HOJJATI, M., (2017). Nonlinear vibrations and stability analysis of a rotor on high-static-low-dynamic-stiffness supports using method of multiple scales. In: Aerospace Science and Technology, Vol. 63, pp. 259-265.
Go to original source...
- GAO, X., TENG, H., (2021). Dynamics and nonlinear effects of a compact near-zero frequency vibration isolator with HSLD stiffness and fluid damping enhancement. In: International Journal of Non-Linear Mechanics, Vol. 128, pp.103632.
Go to original source...
- SLATER, C., OTTO, S., STRANGWOOD, M., (2010). The quasi-static and dynamic testing of damping in golf clubs shafts fabricated from carbon fibre composites. In: Procedia Engineering, Vol. 2, No.2, pp.3361-3366.
Go to original source...
- ZHANG, F., SHAO, S., TIAN, Z., XU, M., XIE, S., (2019).Active-passive hybrid vibration isolation with magnetic negative stiffness isolator based on Maxwell normal stress. In: Mechanical Systems and Signal Processing, Vol. 123, pp. 244-263.
Go to original source...
- LIU, S., PENG, G., LI, Z., LI, W., SUN, L., (2023). Low-frequency vibration isolation via an elastic origami-inspired structure. In: International Journal of Mechanical Sciences, Vol. 260, pp.108622. Elsevier, England. ISSN 0020-7403.
Go to original source...
- HAN, H., TANG, L., WU, J., SUN, S., YIN, P., CAO D. (2023). Origami-inspired isolators with quasi-zero stiffness for coupled axial-torsional vibration. In: Aerospace Science and Technology, Vol. 140, pp. 108438.
Go to original source...
- TENG TENG, J. T., YAAKOB, M. Y., AMIRHAFIZAN BIN HUSIN, M., MOHAMED, K. A., YUZRINA, M., LAU, W. 2022. Flexural and Out-of-Plane Compression Performance of Hexagonal Rubber Wood Core Sandwich with Increasing Cell Wall Thickness. Manufacturing Technology, 22, 240-53.
Go to original source...
- MÜLLER, M., RUDAWSKA, A., TICHÝ, M., KOLÁØ, V., HROMASOVÁ, M. 2020. Research on wear resistance of polymeric composite materials based on microparticles from tyre recyclation process. Manufacturing Technology, 20, 223-8.
Go to original source...
- VA©INA, M., PÖSCHL, M., ZÁDRAPA, P. 2021. Influence of Rubber Composition on Mechanical Properties. Manufacturing Technology, 21, 261-9.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.