Manufacturing Technology 2023, 23(6):1020-1030 | DOI: 10.21062/mft.2023.111

Research on the Application of Mirror Moulds for Masks

Weiwen Ye ORCID...
School of Mechanical and Electrical Engineering, Guangdong University of Science and Technology, Dongguan 523083, Guangdong, China

Precision mirror mould CNC machining is a technology of great importance in industrial manufacturing. Precision mirror moulds are usually used to produce high-precision, high-quality parts and products, which are widely used in automotive manufacturing, aerospace, electronic equipment and other industries. However, the traditional mould polishing process often fails to meet the manufacturing needs of precision moulds, so the application of CNC machining technology has become an effective way to solve this problem. Through the use of CNC machine tools and computer control systems, etc., the detailed formulation of the process plan, so that precision mirror mould CNC machining can achieve high efficiency, accuracy and stability of the machining process, to improve the quality and productivity of the mirror mould. Therefore, the applied research on CNC machining of precision mirror mould is of great significance and economic value.

Keywords: Mirror mould, Process scheme, Validation comparison, Process parameters, Validation effect

Received: September 22, 2023; Revised: December 15, 2023; Accepted: December 19, 2023; Prepublished online: December 19, 2023; Published: December 22, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Ye W. Research on the Application of Mirror Moulds for Masks. Manufacturing Technology. 2023;23(6):1020-1030. doi: 10.21062/mft.2023.111.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. WU, Y., YANG, H., HE, G. (2021). Research and development of XC1.2738, a large thickness mirror plastic mould steel. Mould Manufacturing, pp. 78-80.
    2. WANG, et al: (2022). Development of ZW636 high mirror plastic mould steel. Mould Manufacturing, Vol. 22, No. 08, pp. 81-84.
    3. ZADE, A., KUPPUSAMY, R.R.P. (2020). Mould fill time sensitivity analysis using isothermal mould filling simulations for applications in liquid composite moulding processes. Materials Today: Proceedings, Vol. 27, pp.167-171. Go to original source...
    4. LV, X.J.Q. (2017). Surface crack analysis and process improvement of mirror plastic mould steel P80R hot rolled flat stock. Special Steel, Vol. 38, No. 04, pp. 20-22.
    5. BARANOVSKI, E.F., PUMPUR, V.A., (2000). The mathematical model and program for Calculation of heat exchange at continuous casting of a strip in the "wheel-belt" mould. Litiyo i Metallurgiya (Foundry Production and Metallurgy), Vol. 1, pp.28-30.
    6. KOSOVICH, A.A., GILMANSHINA, T.R., BOGDANOVA, T.A., PARTYKO, E.G., KRITSKY, D.Y., (2017). Development of heat-insulating coatings for die mould of low-pressure casting. Litiyo i Metallurgiya (Foundry Production and Metallurgy), Vol. 1, pp.26-29. Go to original source...
    7. HOU, Z., CHENG, G. (2016). Processing advantages of precision manufacturing technology in 3C moulds. Metal Processing (Cold Processing) Vol. 20, pp. 16-18.
    8. WANG, C., et al. (2015). Research and development of internet of things (IoT) technology based on lean control of the whole process of mould design and manufacturing. Mould Industry, Vol. 41, No. 11, pp. 61-67.
    9. KUMAR, A., KHANNA, R., IKRAM-UL-HAQ, M., SPINK, J., SAHAJWALLA, V. (2016). Corrosion Behaviour of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550° C. steel research international, Vol. 87, No. 1, pp.46-56. Go to original source...
    10. SHIMIZU, Y., UNO, T., SUGAYA, F., TOYOOKA, T., SHIMIZU, K. (2020). Mirror Mold Reuse Techniques in Ancient East Asia. Materials Science Forum, Vol. 4671, Go to original source...
    11. MARTÍNEZ, A., RAYAS, J.A., VÁZQUEZ, S., JARAMILLO, A. (2006). February. Analysis of secondary mirror mold topography to large millimeter telescope using fringe projection technique. In Fifth Symposium Op-tics in Industry Vol. 6046, pp. 452-457. Go to original source...
    12. TSAI, M.J., FANG, J.J., HUANG, J.F. (2006). January. Automatic polishing of super accuracy mirror mold with free-form surface by curvature analysis. In Materials science forum, Vol. 505, pp. 547-552. Go to original source...
    13. JIE, X., et al. (2019). On-line detection, on-line compensation technology in mould manufacturing. Plastics Industry, Vol. 47, No. 03, pp. 47-50.
    14. SHIMIZU, Y., UNO, T., SUGAYA, F., TOYOOKA, T., SHIMIZU, K. (2020). April. Mirror Mold Reuse Techniques in Ancient East Asia. In Materials Science Forum, Vol. 983, pp. 1-5. Go to original source...
    15. CHUANJIANG, L., XIAOCHUN, W. (2017). Research status and prospect of advanced mirror plastic mould steel. Mould Manufacturing, Vol. 17, No. 10, pp. 93-98.
    16. WEI, C., MOK, D.S. (2000). Large-area mirror surface processing technology for precision moulds. Mould Industry, Vol. 02, pp. 47-49.
    17. IT IS NOTED THAT et al. (2019). Application of online inspection and online compensation technology in mould manufacturing. Plastic Industry, Vol. 47, No. 03, pp. 47-50.
    18. Wang, J.Y., (2013). Model study of three-axis linkage machining of elliptical rotary mirror precision mould. Journal of Jilin College of Education (Early), Vol. 29, No. 06, pp. 150-152.
    19. FABIAN, M., HUÒADY, R., KUPEC, F. (2022). Reverse Engineering and Rapid Prototyping in the Process of Developing Prototypes of Automotive Parts. Manufacturing Technology, 22, 669-78. Go to original source...
    20. MACHUTA, J., NOVA, I. (2016). Analysis of Heat Transfer Conditions in the Sand and Metal Moulds and Their Effect on the Solidification of the Casting. Manufacturing Technology, 16, 380-4. Go to original source...
    21. VYKOUKAL, M., BURIAN, A., PØEROVSKÁ, M., LUÒÁK, M., KYSELKA, ©. (2020). Cores Produced by Geopolymer Binder System Technology and Impact to Casting Quality in Comparison with PUR Cold Box Amin. Manufacturing Technology, 20, 110-9. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content