Manufacturing Technology 2024, 24(1):87-97 | DOI: 10.21062/mft.2024.013
Production of Non-Compact, Lightweight Zinc-Tin Alloy Materials for Possible Storage of Liquid Hydrogen
- Technical University of Liberec, Faculty of Mechanical Engineering, Department of Engineering Technology. Stu-dentská 1402/2, Czech Republic
Unfortunately, in connection with the application of the Actavia anti-plagiarism system, we cannot accurately describe our paper, which deals with the production of non-compact materials based on zinc and tin alloys, which have a higher density than aluminium (ρ = 2700 kg.m-3 ) and its alloys, such as zinc alloys (ρ = 6980 kg.m-3 ) or tin (ρ = 7580 kg.m-3 ). Test samples were prepared from these materials, which were characterized by material non-compactness based on the use of NaCl particles. For this purpose, two different size groups of NaCl particles (3 to 5 mm and 5 to 7 mm) were used. In the production of non-compact metallic materials, it is assumed that half of the volume of the workpiece cavity will be occupied by NaCl particles and half of the volume of the work piece cavity will be filled with a melt of the relevant alloy (ZnAl4Cu1 or Sn89Pb). This is different from our previous experiments [24, 25]. In the case of this paper, the fabrication consisted in the fact that in a spe-cial preparation, the melt of the respective alloy was forced between the NaCl particles. The produced samples of non-compact material were analyzed and their specific gravities were determined. In a standard manner (as may be against the findings of the Actavia system), the microstructure was observed on an electron microscope and EDS analysis was also performed. It is anticipated that the non-compact materials thus produced from these two alloys will be used to produce not only filters but also bodies for liquid hydrogen storage.
Keywords: Non-compact material, Sodium chloride, Density, Hydrogen storage
Grants and funding:
The work has been financially supported by the project "Hybrid materials for hierarchical structures", research goal: Composite materials and structures, research program: Materials and structures on the metal basis, reg. No. CZ.02.1./0.0/0.0/16_019/0000843 provided by the European Union and the Czech government
Received: September 25, 2023; Revised: January 11, 2024; Accepted: January 15, 2024; Prepublished online: January 16, 2024; Published: February 23, 2024 Show citation
ACS | AIP | APA | ASA | Harvard | Chicago | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- ASHBY, M.F. (1983). Met. Trans. 14 A, p. 175
Go to original source...
- ASHBY, M.F. et al. (2000). Metal Foams. A Design Guide. Elsevier
- BANHART, J. (2013) Light Metal Foams - History of Innovation and Technological Challenges. Advanced Engineering Materials, 15, No. 3, pp. 82-111
Go to original source...
- GARCIA-MORENO, F. (2016). Commercial Applications of Metal Foams: Their Properties and Production. Materials 9(2), 85; https://doi.org/10.3390/ma9020085
Go to original source...
- BANHART, J. (2001). Manufacture, Characterization and Application of Cellular Metals and Metal Foams. Progress Materials Science, Vol. 46, Iss. 6, pp. 559 - 632
Go to original source...
- [ASHOLT, P. (1999). Metal Foams and Porous Metal Structures, ed. J. Banhart, M.F. Ashby, and N.A Fleck (Bremen, Germany: MIT-Verlag, p. 133
- WOOD, J. (1997). Metal Foams, ed. J. Banhart and H. Eifert (Bremen, Germany: MIT-Verlag, p. 31.
- PRAKASH, SANG, H. and J. D. EMBURY. (1995). Material Science Engineering, A199, pp. 195-203
Go to original source...
- KENNY, L. D. (1996). Mechanical Properties of Particle Stabilized Aluminium Foam. Material Science Forum, p. 1883 - 1890
Go to original source...
- SIMONE, A.E. and L.J. GIBSON. (1998). Aluminium Foams Produced by Liquid State Processes. Acta Material, 46, pp. 3109 - 3123
Go to original source...
- LUNA, E. E. M. BARARI, F. WOOLLEY, R and R. CODDALL. (2014). Casting Protocols for the Pro-duction of Open Cell Aluminium Foams by the Replication Technniqui and the Effect on Porosity. Jour. of Vizual. Exper. (94) 52268.
- BARARI, F. (2014). Metal foam regenerators, heat transfer and pressure drop in porous metals. [Doctoral Thesis]. The University of Sheffield
- GIBSON, L.J. and M.F. ASHBY. (1997). Cellular Solids. 2nd ed. Pergamon Oxford, 1997.
Go to original source...
- YAMAMOTO, H. (1978). Conditions for shear localization in the ductile fracture of void-containing mate-rials. Int. J. Fract. 14, pp. 347-365
Go to original source...
- DONNELL, G.O. and L. LOONEY. (2001). Production of aluminium matrix composite components using conventional PM technology. Mater. Sci. Eng. A 303, pp. 292-301.
Go to original source...
- BANSIDDHI, A. and D.C. DUNAND. (2008). Shape - Memory NiTi Foams Produced by Replication of NaCl Space Holders. Acta Biomater. 4, pp. 1996-2007.
Go to original source...
- MIYOSHI, T. ITOH, M. Akiyama, S. et al. (1999). In: J. Banhart, M.F. Ashby, N.A. Fleck (Eds.) Metal Foams and Porous Metal Structure, MIT Verlag, Bremen, p. 125.
- DANNEMANN, K.A. and J. Lankford Jr. (2000). High strain rate compression of closed-cell aluminium Foams. Mater. Sci. Eng. A, Vol. 293, Iss. 1-2, p. 157-164.
Go to original source...
- PAUL, A. and U. RAMAMURTY. (2000). Strain Rate Sensitivity of Cloused-Cell Aluminium Foam. Ma-ter. Sci. Eng. A, Vol. 281, Iss. 1-2, p. 1-7.
Go to original source...
- KOVACIK, J. TOBOLKA, P. SIMANCIK, F. (1999). In: J. Banhar, M.F. Ashby, N.A. Fleck (Eds.), Metal Foams and Porous Metal Structures, MIT Verlag, Bremen, 1999, p. 405
- KOVACIK, J. (1998). The tensile behaviour of porous metals made by GASAR process. Acta Mater. Vol. 46, Iss. 15, p. 5413 - 5422 https://doi.org/10.3390/ma9020085.
Go to original source...
- Exxentis, (2023). Wettingen, Switzerland, Available online: [http://www.exxentis.co.uk/ (accessed on 11 April).
- Alveotec, (2023). (Venissieux, France) Available online: http://www.alveotec.fr/en/ (accessed on 11 April).
- NOVÁ, I. FRAŇA, K. SOLFRONK, P. and D. KOREČEK (2021). Monitoring the Influence of Sodium Chloride Particle Size on the Physical, Mechanical Properties Structure of Samples of Porous Aluminium Materials. Manufacturing Technology, Vol. 21, No, 1. p. 109-116, DOI: 10.21062/mft.2021.017
Go to original source...
- NOVÁ, I. FRAŇA, K. SOLFRONK, P. SOBOTKA, J. KOREČEK, D. and M. ©VEC. (2021). Characteristics of Porous Aluminium Materials Produced by Pressing Sodium Chloride into Their Melts. Materials, 14, 4809. DOI:10.3390/ma14174809.
Go to original source...
- HASSEIN - HEY, A. H. et. al. (2020). Elaboration and Mechanical-Electrochemical Characterisation of Open Cell Antimonial-Lead Foams Made by the "Excess Salt. Replication Method" for Eventual Applications in Lead-Acid Batteries Manufacturing. Kem. Ind. 69, 7-8, p. 387-398.
Go to original source...
- AIDA, S.F. HIJRAH, M.N. AMIRAH, A.H. ZUHAILAWATI, H. and A.S. ANASYIDA. (2016). Effect of NaCl as a space holder in producing open cell A356 aluminium foam by gravity die casting pro-cess Procedia Chemistry 19, 234-240.
Go to original source...
- ©VEC, M. NOVÁKOVÁ, I. and P. SOLFRONK (2023). Determination of the Effect of Deformation on the Corrosion Resistance of Zn-Al-Mg Coated Sheets. Manufacturing Technology. Vol. 23. No 5. p. 709-716. DOI:10.21062/mft.2023.080.
Go to original source...
- KOLLOVÁ, A. and K. PAUEROVÁ. (2022). Superalloy - Characterization, Usage and recycling. Manufacturing Technology. Vol. 22, No 5. p. 505-556. ISSN 1213-2489, e-ISSN 2787-9402. DOI: 20.21062/mft.2022.070.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.