Manufacturing Technology 2024, 24(1):47-52 | DOI: 10.21062/mft.2024.019

The Effect of Laser Welding Parameters on Aluminium PV Construction Rack Systems

Pavel Houška ORCID...1, Klára Caisová ORCID...2, Vladislav Síťař ORCID...2, Štefan Michna ORCID...2, Tomáš Alfonso ORCID...1
1 Faculty of Social and Economic Studies, J. E. Purkyne University in Usti nad Labem. Moskevska 54, 400 96 Usti nad Labem. Czech Republic
2 Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic

Rising energy demands together with environmental concerns have spurred increased focus on renewable energetics, leading to the widespread installation of photovoltaic power plants worldwide. Due to the unique solar dispersion angle over the world, different racking systems are also the subject of keen interest in mechanical support equipment. Different constructions require welded joints of construction parts with massive strain while exposed to weather conditions. Therefore mechanical properties of the joints of these systems are also being studied. This research is focused on the mechanical properties (such as microstructure and microhardness) of aluminium laser welded joints under different welding parameters. The main aim of this paper is to find ideal parameters of laser welded aluminium profiles ensuring durable construction for PV panels.

Keywords: Aluminium, Laser welding, Solar panels, Racking system construction, Microstructure
Grants and funding:

This research was supported via SGS grant number 45208/15/2009/01 within the student grant competition at UJEP and OP VVV Project Development of new nano and micro coatings on the surface of selected metallic materials - NANOTECH ITI II., Reg. No CZ.02.1.01/0.0/0.0/18_069/0010045

Received: October 15, 2023; Revised: February 15, 2024; Accepted: February 16, 2024; Prepublished online: February 16, 2024; Published: February 23, 2024  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Houška P, Caisová K, Síťař V, Michna Š, Alfonso T. The Effect of Laser Welding Parameters on Aluminium PV Construction Rack Systems. Manufacturing Technology. 2024;24(1):47-52. doi: 10.21062/mft.2024.019.
Download citation

References

  1. KOVALČÍK, T., STOULIL, J., SLAMA, P., VOJTĚCH, D. (2015). The Influence of Heat Treatment on Mechanical and Corrosion Properties of Wrought Aluminium Alloys 2024 and 6064. Manufacturing Technology. 15. 54-61. 10.21062/ujep/x.2015/a/1213-2489/MT/15/2/148. Go to original source...
  2. ABE, N., MORIKAWA, A., TSUKAMOTO, M., MAEDA, K., NAMBA, K. (2003). Welding of aluminium alloy with high power direct diode laser. Proceedings of SPIE - The International Society for Optical Engineering. 10.1117/12.478376. Go to original source...
  3. VICTORIA, M., HAEGEL, N., PETERS, I. M., SINTON, R., JÄGER-WALDAU, A., CAÑ, C., BREYER, C., STOCKS, M., BLAKERS, A., KAIZUKA, I., KOMOTO, K., SMETS, A. (2021). Solar photovoltaics is ready to power a sustainable future. Joule. 5. 10.1016/j.joule.2021.03.005. Go to original source...
  4. SIECKER, J., KUSAKANA, K., NUMBI, B. P. (2017). A review of solar photovoltaic systems cooling technologies. Renew. Sustain. Energy Rev, 79, 192-203. Go to original source...
  5. LI, X., WU, W., YU, C. W. F. (2015) Energy demand for hot water supply for indoor environments: Problems and perspectives. Indoor Built Environ. 24, 5-10. Go to original source...
  6. CHAKAMERA, C., ALAGIDEDE, P. (2018) Electricity crisis and the effect of CO2 emissions on infra-structure-growth nexus in Sub Saharan Africa. Renew. Sustain. Energy Rev, 94, 945-958. Go to original source...
  7. YOUSEF, B. A. A., HACHICHA, A. A., RODRIGUEZ, I., ABDELKAREEM, M.A., INYAAT, A. (2007) Perspective on integration of concentrated solar power plants. Int. J. Low-Carbon Technol. 2021, 1-28.
  8. CHOW, T. T., JI, J., HE, W. (2007) Photovoltaic-Thermal Collector System for Domestic Application. J. Sol. Energy Eng. 129, 205-209. Go to original source...
  9. MAKKI, A., OMER, S., SABIR, H. (2015) Advancements in hybrid photovoltaic systems for enhanced solar cells performance. Renew. Sustain. Energy Rev. 41, 658-684. Go to original source...
  10. FARZANEH, A., MOHAMMDI, M., AHMAD, Z., AHMAD, I. (2012) Aluminium Alloys in Solar Power - Benefits and Limitations. DOI: 10.5772/54721, Go to original source...
  11. BARBÓN, A., FORTUNY-AYUSO, P. O., BAYÓN, L., SILVA, C. A. (2021). A comparative study between racking systems for photovoltaic power systems. Renewable Energy. 180. 10.1016/j.renene.2021.08.065. Go to original source...
  12. SAHUL, M., TURŇA, M., ŠUGÁROVÁ, J., SAHUL, M. (2013). Influence of Laser Welding Aluminium Alloy on Mechanical Properties of Welded Joints. Manufacturing Technology. 13. 526-530. 10.21062/ujep/x.2013/a/1213-2489/MT/13/4/526. Go to original source...
  13. AL-AMRI, F., SAEED, F., MUJEEBU, M. A. (2022). Novel dual-function racking structure for passive cooling of solar PV panels -thermal performance analysis. Renewable Energy. 198. 10.1016/j.renene.2022.08.047. Go to original source...
  14. BÖDEKER, J. M., BAUER, M., PEHNT, M. (2010). Aluminium and Renewable Energy Systems - prospects for the Sustainable Generation of Electricity and Heat. 2010 Resources, America's & Sciences, Na-tional & Engineering, National & Council, National. Electricity from renewable resources: Status, prospects, and im-pediments. 10.17226/12619.
  15. RADU, A., AXINTE, E., THEOHARI, C. (1986). Steady wind pressures on solar collectors on flat-roofed buildings. Journal of Wind Engineering and Industrial Aerodynamics - J WIND ENG IND AERODYN. 23. 249-258. 10.1016/0167-6105(86)90046-2. Go to original source...
  16. CHOCHLÍKOVÁ, H., MAJERNÍK, J., BARÉNYI, I., ESCHEROVÁ, J., PECANEC, M., RAJNOVIC, D., BALOŠ, S., KOHUTIAR, M. (2024). Research on FSW Welds of Al-Alloy Modified by Laser Shock Peening Process. Manufacturing technology. 10.21062/mft.2024.018. Go to original source...
  17. TJOTTA, S. Advantages o extruded aluminium in solar power generation systems processes. Advanced Materials and Processes 2011;169(1): 28-9.
  18. BRADÁČ, J., SOBOTKA J. (2023). Evaluation of Riveting Force Influence on the Quality of Riveted Joint of Aluminium Alloy EN AW - 6016. Manufacturing Technology. 23. 10.21062/mft.2023.011. Go to original source...

This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.